E-werk settings

Kelly Sleeper

unread,

Jul 30, 2011, 4:01:52 PM7/30/11

to rbw-owne...@googlegroups.com

Ok I tried this in lifestyles forum but the post won't go through.. any one by chance know current and voltage settings for the 461 cache battery and or the usb socket. I'm pretty sure voltage will be 5 volts for the iphone 4 but haven't figured out the amps.. thinking of going with 1amp at 5 volt. However i haven't figured out volts for cache battery.. I'm guessing based on little documentation I have that the battery is 1.5 a but can't figure out voltage and can't find documentation on the cache battery either.

any help would be appreciated.

Kelly

islaysteve

unread,

Jul 30, 2011, 5:10:02 PM7/30/11

to rbw-owne...@googlegroups.com

Kelly, I assume your talking Macs, or Apple in any event. Have you tried Mac Forums. Give this a shot and poke around a bit. Folks there can probably help. good luck: http://www.mac-forums.com/forums/switcher-hangout/

Michael Glaser

unread,

Jul 31, 2011, 12:41:42 AM7/31/11

to rbw-owne...@googlegroups.com

Kelly, if I had a question about dynamo-powered anything (including accessory chargers), I'd probably start with Peter White. Have you tried contacting him?

Kelly Sleeper

unread,

Jul 31, 2011, 2:19:17 PM7/31/11

to rbw-owne...@googlegroups.com

I did start there and post didn't show up...then eventually it did.
I did get it working.
Cache battery. 5.6v 1.5a
Never did get iPhone 4 to work with direct charge.

Kelly

Reply all

Reply to author

Forward