simpleone size 56 frame measurements

60 views
Skip to first unread message

SB

unread,
Jan 2, 2012, 10:03:34 PM1/2/12
to RBW Owners Bunch
What are the exact frame measurements, center to center, of the size
56 Simpleone? Thanks!

William

unread,
Jan 2, 2012, 10:07:43 PM1/2/12
to rbw-owne...@googlegroups.com
Message has been deleted

SB

unread,
Jan 2, 2012, 10:19:07 PM1/2/12
to RBW Owners Bunch
Thanks! That's a great help. I didn't know there was an updated
geometry chart.

I would still like to find out, however, one additional piece of info
not contained in the chart -- namely, what is the standover height?

On Jan 2, 7:07 pm, William <tapebu...@gmail.com> wrote:
> https://docs.google.com/spreadsheet/ccc?key=0AjehUKAztnO8dEFRVEYxUWpx...

William

unread,
Jan 2, 2012, 10:46:00 PM1/2/12
to rbw-owne...@googlegroups.com
Everything you need to get a really good guess is there on the charts.  A Roadeo had the same seat tube angle and top tube slope.  Split the difference between the 55 and the 57 and you're at 81.5cm.  The Roadeo has 2mm more drop than the SO, so the Simple One 56 would have a standover of 81.7cm with similar tires.  I'd wager it was Jack Browns.  Adjust up a few mm if you are going to run fatter tires. 

Give them a call to make sure, but I'd bet a dollar that's an estimate within a couple mm. 

SB

unread,
Jan 2, 2012, 11:39:18 PM1/2/12
to RBW Owners Bunch
Makes sense. Thanks!

ted

unread,
Jan 3, 2012, 12:05:25 AM1/3/12
to RBW Owners Bunch
I get about 81.5 with my tape measure (56 SO w/ jack browns).
Reply all
Reply to author
Forward
0 new messages