stentura

Kristen C

unread,

Apr 15, 2016, 3:31:38 PM4/15/16

to Plover

Is plover compatible with stentura 400 SRT? I normally use it with stentura protege, but I left my protege at home so I'm using a 400 set from school and it doesn't seem to be recognizing it. Stays disconnected even though the machine is on and cords are hooked up

Kovacsics Róbert

unread,

Apr 15, 2016, 5:03:16 PM4/15/16

to Plover

On Friday, 15 April 2016 20:31:38 UTC+1, Kristen C wrote:

Is plover compatible with stentura 400 SRT? I normally use it with stentura protege, but I left my protege at home so I'm using a 400 set from school and it doesn't seem to be recognizing it. Stays disconnected even though the machine is on and cords are hooked up

Works with my 200 SRT, which I believe is almost the same inside. I have the following settings:

Are you using a realtime cable? It does not work with only a serial cable, in my experience. Make sure you click scan first.

Valentin

unread,

Apr 16, 2016, 6:13:00 AM4/16/16

to Plover

I have a 400 SRT. I also initially had problems getting it to connect, here's what I found out:
- You need a crossover cable
- Baudrate gets cycled through on mine, so I need to use 2400 baud. Try that, and maybe some of the others

Magda Ksiazak

unread,

Aug 15, 2016, 10:42:37 AM8/15/16

to Plover

Kristen, how do you set up your Protege to work with Plover? Mine isn't cooperating. :(

Reply all

Reply to author

Forward