not able to up the ethernet port in Panda board OMAP4460

60 views
Skip to first unread message

Raju Singh

unread,
Apr 19, 2012, 8:52:41 AM4/19/12
to pandaboard
Hello everyone,

The ethernet is not up even after building the Linux kernel with
ethernet support module for panda board (i.e SMSC LAN9514). Is there
anything else I am missing for making the ethernet up?

kindly help me to make the ethernet up.

Thanks & regards
Raju Singh

menni001

unread,
Apr 19, 2012, 3:00:14 PM4/19/12
to pandaboard
Hi,

I have a similar problem when running wlan-test.sh with my Pandaboard
ES Rev B1 from SVTronics.
This will be of no help for you directly now but two similar problems
might be somehow related and, who knows, someone has already a good
solution.
Here are my details:

Loading SDIO module
[ 690.780059] sdio: version magic '2.6.35-g6d019da-dirty SMP preempt
mod_unload ARMv7 ' should be '3.0.4+ SMP preempt mod_unload
modversions ARMv7 '
insmod: cannot insert 'sdio.ko': invalid module format
Loading TIWLAN module
[ 698.567840] tiwlan_drv: version magic '2.6.35-g6d019da-dirty SMP
preempt mod_unload ARMv7 ' should be '3.0.4+ SMP preempt mod_unload
modversions ARMv7 '
insmod: cannot insert 'tiwlan_drv.ko': invalid module format
Loading firmware
ERROR - IPC_STA_Private_Send - error sending Wext private IOCTL to STA
driver (ioctl_cmd = 8000000, res = -1, errno = 19)
Wlan_loader: Error sending init command (DRIVER_INIT_PARAM) to driver
Bringing interface up
ifconfig: SIOCGIFFLAGS: No such device
Connecting to AP
==========================
Acquiring dhcp address:
udhcpc: SIOCGIFINDEX: No such device
Pinging IP address - 192.168.0.155
PING 192.168.0.155 (192.168.0.155): 56 data bytes
ping: sendto: Network is unreachable

Is this similar to your problem?
Any idea what's wrong? Ok, there are errors with insmod and so on, but
why? What's the solution?
Is there anybody out there to clarify?

Best regards
Constant
Reply all
Reply to author
Forward
0 new messages