Hi Rainer,
sorry for the delay in responding. I do not see anything in the log when the temperature on the display changes on the Thermostat CT-101. However, when i press the button i have created linked to AIR_TEMPERATURE_SCALE_FAHRENHEIT, it does respond back with the response and updates the temperature on Openremote panel on the app. I have included the relevant lines from the log below.
Does it matter if the thermostat is operating on battery only vs. connected to the C wire i.e. externally powered and Z-wave radio always on? I do not have the C-wire connected to the thermostat and it is operating only on batteries.
what i have noticed is it does not update any status automatically- ie. if i turn on Heat or change mode using thermostat buttons, it does not update on the panel on the app.
DEBUG 2019-11-16 20:35:51,762 (Z-Wave): Command_Builder : Building Z-Wave command
DEBUG 2019-11-16 20:35:51,763 (Z-Wave): Command_Builder : Z-Wave command: nodeId = '39', endPoint = '0'
DEBUG 2019-11-16 20:35:51,763 (Z-Wave): Command_Builder : Z-Wave command: command = AIR_TEMPERATURE_SCALE_FAHRENHEIT
DEBUG 2019-11-16 20:35:51,763 (Z-Wave): Command_Builder : Z-Wave command: paramValue = null
DEBUG 2019-11-16 20:35:51,763 (Z-Wave): Command_Builder : Z-Wave command created successfully
DEBUG 2019-11-16 20:35:51,763 (Z-Wave): CCMultiLevelSensor : Node '39:0' : [COMMAND_CLASS_SENSOR_MULTILEVEL::SENSOR_MULTILEVEL_GET]
DEBUG 2019-11-16 20:35:51,770 (Z-Wave): Controller_API : Dequeue (WORKING-Queue, Count=0) Z-Wave function call 'ZW_SendData(NodeID=39, Payload=[0x31, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2019-11-16 20:35:51,770 (Z-Wave): Controller_API : Enqueue (WORKING-Queue, Count=1) Z-Wave function call 'ZW_SendData(NodeID=39, Payload=[0x31, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'.
DEBUG 2019-11-16 20:35:51,771 (Z-Wave): TX_Session_Layer : Executing Z-Wave function call 'ZW_SendData(NodeID=39, Payload=[0x31, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x00)'...
DEBUG 2019-11-16 20:35:51,771 (Z-Wave): TX_Session_Layer : Send (repeat count=1) Z-Wave function 'ZW_SendData(NodeID=39, Payload=[0x31, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x0A)' request (callback ID=0x0A).
DEBUG 2019-11-16 20:35:51,772 (Z-Wave): TX_Frame_Layer : Send data frame [0x01, 0x09, 0x00, 0x13, 0x27, 0x02, 0x31, 0x04, 0x05, 0x0A, 0xFA].
DEBUG 2019-11-16 20:35:51,773 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x01]
DEBUG 2019-11-16 20:35:51,773 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x09]
DEBUG 2019-11-16 20:35:51,773 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x00]
DEBUG 2019-11-16 20:35:51,777 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x13]
DEBUG 2019-11-16 20:35:51,778 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x27]
DEBUG 2019-11-16 20:35:51,778 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x02]
DEBUG 2019-11-16 20:35:51,778 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x31]
DEBUG 2019-11-16 20:35:51,779 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x04]
DEBUG 2019-11-16 20:35:51,779 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x05]
DEBUG 2019-11-16 20:35:51,779 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x0A]
DEBUG 2019-11-16 20:35:51,779 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0xFA]
DEBUG 2019-11-16 20:35:51,781 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x06]
DEBUG 2019-11-16 20:35:51,782 (Z-Wave): RX_Frame_Layer : ACK -> Data frame [0x01, 0x09, 0x00, 0x13, 0x27, 0x02, 0x31, 0x04, 0x05, 0x0A, 0xFA] transmission OK.
DEBUG 2019-11-16 20:35:51,782 (Z-Wave): RX_Session_Layer : ACK -> Z-Wave function 'ZW_SendData(NodeID=39, Payload=[0x31, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x0A)' has been successfully sent - waiting 5,000 [ms] for response frame.
DEBUG 2019-11-16 20:35:51,786 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x01]
DEBUG 2019-11-16 20:35:51,787 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x04, 0x01, 0x13, 0x01, 0xE8]
DEBUG 2019-11-16 20:35:51,787 (Z-Wave): RX_Frame_Layer : Data frame [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] has been received.
DEBUG 2019-11-16 20:35:51,788 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x06]
DEBUG 2019-11-16 20:35:51,788 (Z-Wave): RX_Session_Layer : 'ZW_SendData' response [0x01, 0x04, 0x01, 0x13, 0x01, 0xE8] with status 'RETURN_VALUE_TRUE' received (callback ID=0x0A).
DEBUG 2019-11-16 20:35:51,788 (Z-Wave): RX_Session_Layer : Waiting 64,983 [ms] for 'ZW_SendData' callback frame (callback ID=0x0A).
DEBUG 2019-11-16 20:35:53,093 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x01]
DEBUG 2019-11-16 20:35:53,094 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x07, 0x00, 0x13, 0x0A, 0x00, 0x00, 0x84, 0x65]
DEBUG 2019-11-16 20:35:53,095 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x06]
DEBUG 2019-11-16 20:35:53,095 (Z-Wave): RX_Frame_Layer : Data frame [0x01, 0x07, 0x00, 0x13, 0x0A, 0x00, 0x00, 0x84, 0x65] has been received.
DEBUG 2019-11-16 20:35:53,097 (Z-Wave): RX_Session_Layer : Callback [0x01, 0x07, 0x00, 0x13, 0x0A, 0x00, 0x00, 0x84, 0x65] (callback ID=0x0A) with state 'TRANSMIT_COMPLETE_OK' received -> Z-Wave function 'ZW_SendData(NodeID=39, Payload=[0x31, 0x04], TxOptions=[TRANSMIT_OPTION_AUTO_ROUTE, TRANSMIT_EXPLORE_OPTION_ACK], CallbackID=0x0A)' successfully executed.
DEBUG 2019-11-16 20:35:53,100 (Z-Wave): CCMultiLevelSensor : Node '39:0' : [COMMAND_CLASS_SENSOR_MULTILEVEL::SENSOR_MULTILEVEL_GET] succeeded.
DEBUG 2019-11-16 20:35:53,179 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x01]
DEBUG 2019-11-16 20:35:53,181 (Z-Wave): RX_Serial_Port_RXTX : Data bytes read : [0x0C, 0x00, 0x04, 0x00, 0x27, 0x06, 0x31, 0x05, 0x01, 0x2A, 0x02, 0xE4, 0x2F]
DEBUG 2019-11-16 20:35:53,182 (Z-Wave): TX_Serial_Port_RXTX : Data byte sent : [0x06]
DEBUG 2019-11-16 20:35:53,183 (Z-Wave): RX_Frame_Layer : Data frame [0x01, 0x0C, 0x00, 0x04, 0x00, 0x27, 0x06, 0x31, 0x05, 0x01, 0x2A, 0x02, 0xE4, 0x2F] has been received.
DEBUG 2019-11-16 20:35:53,184 (Z-Wave): RX_Session_Layer : Node '39' : [APP_CMD_HANDLER_FRAME : NodeID='39', Status=[RECEIVE_STATUS_TYPE_SINGLE], CommandClass='COMMAND_CLASS_SENSOR_MULTILEVEL', Command='0x05', Parameters: [0x01, 0x2A, 0x02, 0xE4]]
DEBUG 2019-11-16 20:35:53,186 (Z-Wave): CCMultiLevelSensor : Node '39:0' : [COMMAND_CLASS_SENSOR_MULTILEVEL::SENSOR_MULTILEVEL_REPORT, Value='74', Type='AIR_TEMPERATURE', Scale='AIR_TEMPERATURE_SCALE_FAHRENHEIT'].