----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 09.03.2012 23:51
An: "OpenNI"<openni-dev@googlegroups.
com>
Betreff: [OpenNI-dev] Building on debian sid: undefined reference to symbol 'glEnd'
Platform/Linux/CreateRedist/../Build > /home/dreamer/Sources/kinect/
OpenNI/Platform/Linux/CreateRedist/Output/BuildOpenNI.txt
Building Failed!
--
You received this message because you
are subscribed to the Google Groups "OpenNI" group.
To post to this group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-dev+...@googlegroups.com.
For more options, visit this
group at http://groups.google.com/group/openni-dev?hl=en.
void glutDisplay (void)
{
XnStatus rc = XN_STATUS_OK;
// Read a
new frame
rc = g_context.WaitAnyUpdateAll();
if (rc != XN_STATUS_OK)
{
printf("Read failed: %s\n",
xnGetStatusString(rc));
return;
}
g_depth.GetMetaData(g_depthMD);
g_image.GetMetaData(g_imageMD);
const
XnDepthPixel* pDepth = g_depthMD.Data();
const XnUInt8* pImage = g_imageMD.Data();
unsigned int nImageScale =
GL_WIN_SIZE_X / g_depthMD.FullXRes();
// Copied from SimpleViewer
// Clear the OpenGL buffers
glClear
(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
// Setup the OpenGL viewpoint
glMatrixMode(GL_PROJECTION);
// here you
make a
---> glPushMatrix();
glLoadIdentity();
glOrtho(0, GL_WIN_SIZE_X, GL_WIN_SIZE_Y, 0, -1.0, 1.0);
//
Calculate the accumulative histogram (the yellow display...)
HERE SOME STUFFF
.....
// Create the
OpenGL texture map
glTexParameteri(GL_TEXTURE_2D, GL_GENERATE_MIPMAP_SGIS, GL_TRUE);
glTexParameteri
(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR);
glTexParameteri(GL_TEXTURE_2D,
GL_TEXTURE_MAG_FILTER, GL_LINEAR);
glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, g_nTexMapX, g_nTexMapY, 0, GL_RGB,
GL_UNSIGNED_BYTE, g_pTexMap);
// Display the OpenGL texture map
glColor4f(1,1,1,1);
--> glBegin(GL_QUADS);
int nXRes = g_depthMD.FullXRes();
int nYRes = g_depthMD.FullYRes();
// upper left
glTexCoord2f(0, 0);
glVertex2f(0, 0);
// upper right
glTexCoord2f((float)nXRes/(float)
g_nTexMapX, 0);
glVertex2f(GL_WIN_SIZE_X, 0);
// bottom right
glTexCoord2f((float)nXRes/(float)
g_nTexMapX, (float)nYRes/(float)g_nTexMapY);
glVertex2f(GL_WIN_SIZE_X, GL_WIN_SIZE_Y);
// bottom left
glTexCoord2f(0, (float)nYRes/(float)g_nTexMapY);
glVertex2f(0, GL_WIN_SIZE_Y);
glEnd(); //THIS IS
EV. THE FAILURE ITS CORRESPONDED WITH glBegin(GL_QUAD);
BUT YOU NO glPopMatrix()
------------------------
regards
nomad
--------------------------
----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 10.03.2012 14:
44
An: "OpenNI"<openn...@googlegroups.com>
Betreff: [OpenNI-dev] Re: Building on debian sid: undefined reference to
symbol 'glEnd'
Yes, I have all the requirements installed (from the README).
> For more options, visit this
> group athttp://groups.google.com/group/openni-dev?
hl=en.
--
You received this message because you are subscribed to the Google Groups "OpenNI" group.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
glEnd(); //THIS IS
--> glPopMatrix()
hope its useful
regards nomad
----Ursprüngliche Nachricht----
> send email to openni-
d...@googlegroups.com.
>
> > To unsubscribe from this group, send email to openni-
>
> dev+uns...@googlegroups.com.
> For more options, visit this
> > group athttp://groups.google.com/group/openni-dev?
>
> hl=en.
>
> --
> You received
this message because you are subscribed to the Google Groups "OpenNI" group.
> To post to this
> group, send email to
openn...@googlegroups.com.
> To unsubscribe from this group, send email to openni-
> dev+unsubscribe@googlegroups.
com.
> For more options, visit this group athttp://groups.google.com/group/openni-dev?hl=en.
--
You received this
message because you are subscribed to the Google Groups "OpenNI" group.
To post to this group, send email to openni-
d...@googlegroups.com.
To unsubscribe from this group, send email to openni-dev+...@googlegroups.com.
----Ursprüngliche
Nachricht----
Von: alib...@gmail.com
Datum: 12.03.2012 09:54
An: "OpenNI"<openn...@googlegroups.com>
Betreff:
[OpenNI-dev] Re: Building on debian sid: undefined reference to symbol 'glEnd'
You mean I should grep through
> You received this
> message because you are subscribed to the Google Groups
"OpenNI" group.
> To post to this group, send email to openni-
> d...@googlegroups.com.
> To unsubscribe from this
group, send email to openni-dev+...@googlegroups.com.
> For more
> options, visit this group athttp://groups.
google.com/group/openni-dev?hl=en.
--
You received this message because you are subscribed to the Google Groups
"OpenNI" group.
To post to this group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send
regards nomad
----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 12.03.2012 09:59
An: "OpenNI"<openni-
d...@googlegroups.com>
Betreff: [OpenNI-dev] Re: Building on debian sid: undefined reference to symbol 'glEnd'
> > > An: "OpenNI"<openni-
d...@googlegroups.com>
> > You received this
> > message because you are subscribed to the Google Groups "OpenNI" group.
>
> To post to this group, send email to openni-
> > d...@googlegroups.com.
> > To unsubscribe from this group, send email
to openni-dev+...@googlegroups.com.
> > For more
> > options, visit this group athttp://groups.google.
com/group/openni-dev?hl=en.
--
You received this message because you are subscribed to the Google Groups "OpenNI"
group.
To post to this group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to
> > > For more options, visit this
> > > >
group athttp://groups.google.com/group/openni-dev?
>
> > > hl=en.
>
> > > --
> > > You received
>
> > this message
because you are subscribed to the Google Groups "OpenNI" group.> To post to this
> > > group, send email to
>
> >
openn...@googlegroups.com.
>
> > > To unsubscribe from this group, send email to openni-
> > >
dev+unsubscribe@googlegroups.
> > com.
> > > For more options, visit this group athttp://groups.google.com/group/openni-
dev?hl=en.
>
> > --
> > You received this
> > message because you are subscribed to the Google Groups "OpenNI" group.
>
> To post to this group, send email to openni-
> > d...@googlegroups.com.
> > To unsubscribe from this group, send email
> > For more
> > options, visit this group athttp://groups.google.
com/group/openni-dev?hl=en.
--
You received this message because you are subscribed to the Google Groups "OpenNI"
group.
To post to this group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to
Hello,
> > > An: "OpenNI"<openni-dev@googlegroups.com>
> > > For more options, visit this
> > > > group athttp://groups.google.com/group/openni-dev?
>
> > > hl=en.
>
> > > --
> > > You received
>
> > this message because you are subscribed to the Google Groups "OpenNI" group.> To post to this
> > > group, send email to
>
> > openn...@googlegroups.com.
>
> > > To unsubscribe from this group, send email to openni-
> > > dev+unsubscribe@googlegroups.
> > com.
> > > For more options, visit this group athttp://groups.google.com/group/openni-dev?hl=en.
>
> > --
> > You received this
> > message because you are subscribed to the Google Groups "OpenNI" group.
> > To post to this group, send email to openni-
> > d...@googlegroups.com.
> > To unsubscribe from this group, send email to openni-dev+unsubscribe@googlegroups.com.
> > For more
> > options, visit this group athttp://groups.google.com/group/openni-dev?hl=en.
--
You received this message because you are subscribed to the Google Groups "OpenNI" group.
To post to this group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-dev+unsubscribe@googlegroups.com.
No, I'm definitely sure that I pulled the git repository correctly.
I actually tried a clean pull and I get the exact same result.
On Tuesday, 13 March 2012 09:05:10 UTC+1, nomad wrote:
hi (2)
its possible that you have the package (unstable or master) not correct install.... :-(
excuse my english
regards nomad
----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 12.03.2012 09:59
An: "OpenNI"d...@googlegroups.com>
Betreff: [OpenNI-dev] Re: Building on debian sid: undefined reference to symbol 'glEnd'
Btw, I get the same result with the master branch.
On Mar 12, 9:54 am, Alexander <alibo...@gmail.com> wrote:
> You
mean I should grep through the entire openni source?
> Let me remind you: this is not 'my' code. It's the unstable
branch
> from github.
>
> I appreciate your help, but I still have no idea what to do with it.
>
> On Mar 12, 9:12 am,
"stevenm...@bluewin.ch" <stevenm...@bluewin.ch>
> wrote:
>
>
>
>
>
>
>
> > hi
> > look in your code
> > if you make a
>
> glPushMatrix();
> > .....
>
> > > this is wrong glColor4f(1,1,1,1); float
>
> > (1.0f,1.0f,1.0f,1.0f)
>
> .......
>
> > glBegin(GL_QUADS);
> > ......
> > ......
>
>
> glEnd(); //THIS IS
> > > printf("Read failed: %
s\n",
> > > xnGetStatusString(rc));
> > > return;
> > > }
>
> > > g_depth.GetMetaData
(g_depthMD);
> > > An: "OpenNI"d...@googlegroups.com>
> > > Betreff: [OpenNI-dev] Re: Building on debian sid: undefined
> > reference to
> > > symbol
'glEnd'
>
> > > Yes, I have all the requirements installed (from the README).
> > > This was the
> > output of
the
> > > 'OpenNI/Platform/Linux/CreateRedist/
> > > RedistMaker' script.
>
> > > On Mar 10, 10:01 am, "stevenm...
>
>
> @bluewin.ch" @bluewin.ch>
> > > wrote:> hi
> > > > have you opengl-headers and libs??? into
compileScript
> > RedistMaker ???
> > > > glEnd should be
> > > glEnd().....
> > > > regards nomad
>
> > > > ----
Ursprüngliche Nachricht----
> > > > Von:
>
> >alibo...@gmail.com> > Datum: 09.03.2012 23:51
>
> > > An: "OpenNI"
com>
> > > > Betreff: [OpenNI-
>
> > dev] Building on debian sid: undefined reference to
>
>
> > symbol 'glEnd'
> > > For more options, visit this group athttp://groups.google.com/group/openni-
dev?hl=en.
>
> > --
> > You received this
> > message because you are subscribed to the Google Groups "OpenNI" group.
>
> To post to this group, send email to openni-
> >d...@googlegroups.com.
> > To unsubscribe from this group, send email
to openni-dev+unsubscribe@googlegroups.com.
> > For more
> > options, visit this group athttp://groups.google.
com/group/openni-dev?hl=en.--
----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 14.03.2012 10:09
An:
<openn...@googlegroups.com>
Kopie: <steve...@bluewin.ch>
Betreff: Re: [OpenNI-dev] Re: Building on debian sid:
undefined reference to symbol 'glEnd'
>>> > > >dev+uns...@googlegroups.com.
>>> > > For more
>>> > > options, visit this group athttp://groups.google.
>>>
com/group/openni-dev?hl=en.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>>
Groups "OpenNI"
>>> group.
>>> To post to this group, send email to openn...@googlegroups.com.
>>> To unsubscribe
from this group, send email to
>>> openni-dev+...@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/openni-dev?hl=en.
>>>
>>>
>>>
On Wednesday, 14 March 2012 09:35:28 UTC+1, nomad
wrote:
>
> hi
> you must on your compile included opengl.
> you can do that
> example:
> g++ -o niGestureX020
SceneDrawerX22.cpp niGestureX020.cpp
> -I/usr/include/GL -I/usr/include/ni -l'OpenNI' -l'glut' -lglut -lGLU -lGL
>
niGestureX020.cpp change to your program-name.
> regards nomad
>
>
>
>
> Btw, I see that in Samples/NiSimpleViewer/x86-
Release/NiSimpleViewer.d
>>> > > > }
>>> >
>>> > > > g_depth.GetMetaData
>>> (g_depthMD);
>>> > > > g_image.GetMetaData
>>> > > >dev+uns...@googlegroups.com.
>>> > > For more
>>> > > options, visit this group athttp://groups.google.
>>>
com/group/openni-dev?hl=en.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>>
Groups "OpenNI"
>>> group.
>>> To post to this group, send email to openn...@googlegroups.com.
>>> To unsubscribe
from this group, send email to
>>> openni-dev+...@googlegroups.com.
>>> For more options, visit this group at
>>> http://groups.google.com/group/openni-dev?hl=en.
>>>
>>>
>>>
--
You received this message because you are
subscribed to the Google Groups "OpenNI" group.
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
>>> > > >dev+unsubscribe@googlegroups.com.
>>> > > For more
>>> > > options, visit this group athttp://groups.google.
>>>
com/group/openni-dev?hl=en.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>>
Groups "OpenNI"
>>> group.
>>> To post to this group, send email to openn...@googlegroups.com.
>>> To unsubscribe
from this group, send email to
>>> > > >dev+unsubscribe@googlegroups.com.
>>> > > For more
>>> > > options, visit this group athttp://groups.google.
>>>
com/group/openni-dev?hl=en.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>>
Groups "OpenNI"
>>> group.
>>> To post to this group, send email to openn...@googlegroups.com.
>>> To unsubscribe
from this group, send email to
>>> For more options, visit this group at
>>> http://groups.google.com/group/openni-dev?hl=en.
>>>
>>>
>>>
--
You received this message because you are
subscribed to the Google Groups "OpenNI" group.
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
libusb-1.0-0-dev
freeglut3-dev
libboost-all-dev
libwxbase2.8-dev
libwxgtk2.8-dev
wx-common
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ.
To unsubscribe from this group, send email to openni-dev+...@googlegroups.com.
----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 16.03.2012 00:58
An: <openni-
d...@googlegroups.com>
Kopie: <steve...@bluewin.ch>
Betreff: Re: Re: [OpenNI-dev] Re: Building on debian sid:
My program? Your compile?
(GL_WIN_SIZE_X, 0);
> >>> > > > // bottom right
> >>> > >
> >>>
> > glTexCoord2f((float)
nXRes/(float)
> >>> > > > g_nTexMapX, (float)nYRes/(float)
> >>> > > g_nTexMapY);
> >>> >
> >
> >>> >
glVertex2f(GL_WIN_SIZE_X, GL_WIN_SIZE_Y);
> >>> > > > // bottom left
> >>> >
> >>> > > >
> glTexCoord2f
(0,
> >>> >
> >>> >
> >>> > (float)nYRes/(float)g_nTexMapY);> glVertex2f(0,
> >>> GL_WIN_SIZE_Y);
> >>>
> >
> >>> > > > glEnd(); //THIS IS
> >>> > >
> >>> > EV. THE
> >>> >
> >>> > > FAILURE ITS CORRESPONDED WITH
glBegin
> (GL_QUAD);
> >>> >
> >>> > > > BUT YOU NO glPopMatrix()
> >>> > > >
> >>> ------------------------
> >>> > >
> regards
> >>> >
> >>>
> > > nomad
> >>> >
> >>> > > > --------------------------
> >>> >
> >>> > > >dev+uns...@googlegroups.com.
> dev+uns...@googlegroups.com.
> >>> > > For more
> >>> > > options, visit this group athttp://groups.google.
>
>>>
> com/group/openni-dev?hl=en.
> >>>
> >>> --
> >>> You received this message because you are subscribed to the
Google
> >>>
> Groups "OpenNI"
> >>> group.
> >>> To post to this group, send email to openn...@googlegroups.com.
> >>> To unsubscribe
> from this group, send email to
> >>> openni-dev+...@googlegroups.com.
> g_nTexMapY);
> >>> > >
> >>> > glVertex2f(GL_WIN_SIZE_X, GL_WIN_SIZE_Y);
> >>> > >
> // bottom left
>
> >>> >
> >>> > > > glTexCoord2f(0,
> >>> >
> >>> >
> >>> > (float)nYRes/(float)
>>> > > >dev+uns...@googlegroups.com.
> dev+uns...@googlegroups.com.
> >>> > > For
more
> >>> > > options, visit this group athttp://groups.google.
> >>>
> com/group/openni-dev?hl=en.
> >>>
> >>> --
>
>>> You received this message because you are subscribed to the Google
> >>>
> Groups "OpenNI"
> >>> group.
> >>> To
post to this group, send email to openn...@googlegroups.com.
> >>> To unsubscribe
> from this group, send email to
> >>> openni-dev+...@googlegroups.com.
> >>> For more options, visit this group at
>
> >>> http://groups.google.com/group/openni-dev?hl=en.
> >>>
> >>>
> >>>
>
> --
> You received this message because
you are
> subscribed to the Google Groups "OpenNI" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ.
> To post to this
> group, send email to openni-
d...@googlegroups.com.
> To unsubscribe from this group, send email to openni-
> dev+uns...@googlegroups.com.
> For
more options, visit this group at
> http://groups.google.com/group/openni-dev?hl=en.
>
>
>
--
You received this message because you are subscribed to
the Google Groups "OpenNI" group.
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J.
To unsubscribe from this group, send email to openni-dev+...@googlegroups.com.
I'm sorry if I appeared
(c)rude in my last replies. I appreciate all the
help, even though some of it wasn't very helpful for me.
All the
requisites are already installed and I have tried both branches, so
I will try the other method you linked to.
regards
On Friday, 16 March 2012 10:14:19 UTC+1, igorbb wrote:
>
> Check you have the installed libraries :
>
>
libusb-1.0-0-dev
> *freeglut3-dev*
> libboost-all-dev
> libwxbase2.8-dev
> libwxgtk2.8-dev
> wx-common
>
>
> Try to
compile it now.. if it does not work check if you have the same
> problems with the stable branch ?
>
> IF still it
does not work:
>
> Try doing this way :
>
> http://www.openni.org/Downloads/OpenNIModules.aspx
>
> Unzip the modules to a folder (on my case it worked with the
stable
> version) ,
>
> rename it openni sensor and nite
>
> *Install Openni*
> cd openni
> sudo sh install.sh
> cd
..
>
> *If you Are using Microsoft kinect don't install the sensor version from
> the website, install this one: https://github.com/avin2/SensorKinect
>
> *
> Download the module fromhttps://github.
com/avin2/SensorKinect/zipball/unstable
> unzip as sensorkinect
>
> cd sensorkinect/Platform/Linux/CreateRedist/
>
chmod +ax RedistMaker
>
> ./RedistMaker
>
> got to the folder
> /Redist/Sensor-Bin-Linux-x64-v5.1.0.25
> sudo sh
install.sh
> *
> *
> *
> If you are not using microsoft kinect :*
> cd sensor
> sudo sh install.sh
>
> *Then install
NITE ..*
>>> in Samples/NiSimpleViewer/x86-**Release/NiSimpleViewer.d
>>> >>> > > > glVertex2f
(GL_WIN_SIZE_X, 0);
>>> >>> > > > // bottom right
>>> >>> > >
>>> >>>
>>> > glTexCoord2f
((float)nXRes/(**float)
>>> >>> > > > g_nTexMapX, (float)nYRes/(float)
>>> >>> > > g_nTexMapY);
>>> >>> >
>>> >
>>>
>>> > glVertex2f(GL_WIN_SIZE_X, GL_WIN_SIZE_Y);
>>> >>> > > > // bottom left
>>> >>> >
>>>
>>> > > >
>>> glTexCoord2f(0,
>>> >>> >
>>> >>> >
>>> >>> > (float)nYRes/(float)g_**nTexMapY);> glVertex2f
'OpenNI/Platform/Linux/**CreateRedist/
/usr/bin/ld: ./x86-Release/NiSimpleViewer.**o:
/home/dreamer/Sources/kinect/**OpenNI/
>>> >>> >
>>> >>> > > > > Platform/Linux/CreateRedist/..**/Build
>>>
>>> >>> > >
> >
>>> >>> /home/dreamer/Sources/kinect/
>>> >>> >
>>> >>> > >
OpenNI/Platform/Linux/**CreateRedist/Output/**BuildOpenNI.txt>
>>> >
>>> >>> Building Failed!
>>> >>> >
>>> >>> > >
>>> >>> > > --
>>> >>> > > > > You received this message
>>> >>> > > because you
>>> >>> > > > >
>>> are subscribed to
the Google Groups "OpenNI" group.
>>> >>> >
>>> >>> > > > To post to this group,
>>> >>> >
>>> >>> > > > send email
>>> to openni-
>>> >>> >
>>> >>> > >d...@googlegroups.com.
>>> >>> >
>>> >>> > > > > To unsubscribe from
>>> >>> this
group, send email to
>>> openni-
>>> >>> >
>>> >>> > > >dev+unsubscribe@googlegroups.**com<dev%
2Bunsu...@googlegroups.com>
>>> .
>>> >>> > > > For more options, visit this
>>> >>> > > > >
>>> >>> group
>>>
athttp://groups.google.com/**group/openni-dev<http://groups.google.com/group/openni-dev>
>>> ?
>>> >>> >
>>> >>> > > >
hl=en.
>>> >>> >
>>> >>> > > > --
>>> >>> > > > You received
>>> >>> >
>>> >>>
>>> > > this message
>>> >>> because
you are subscribed to the Google Groups "OpenNI" group.> To
>>> post
>>> >>> to this
>>> >>> > > >
>>> group, send
email to
>>> >>> >
>>> >>> > >
>>> >>> openn...@googlegroups.com.
>>> >>> >
>>> >>> > > > To unsubscribe from this
group,
>>> send email to openni-
>>> >>> > > >
>>> >>> dev+unsubscribe@googlegroups.
>>> >>> > > com.
>>> >>> > > >
For more options, visit this
>>> group athttp://
>>> >>> groups.google.com/group/**openni-<http://groups.google.com/group/openni->
>>> >>> dev?hl=en.
>>> >>> >
>>> >>>
> > --
>>> >>> > > You received this
>>> >>> > >
>>> message because you are subscribed to the Google Groups "OpenNI"
>>> >>> group.
>>> >>> >
>>> >>> > To post to this group, send
>>> email to openni-
>>> >>> > >d...@googlegroups.com.
>>> >>> > > To unsubscribe from this group, send email
>>> >>> to openni-
>>> dev+unsubscribe@googlegroups.**com <dev%
2Bunsu...@googlegroups.com>.
>>> >>> > > For more
>>> >>> > > options, visit this group athttp://groups.google.
>>>
>>>
>>> com/group/openni-dev?hl=en.
>>> >>>
>>> >>> --
>>> >>> You received this message because you are subscribed
to the Google
>>> >>>
>>> Groups "OpenNI"
>>> >>> group.
>>> >>> To post to this group, send email to openni-
d...@googlegroups.com.
>>> >>> To unsubscribe
>>> from this group, send email to
>>> >>> openni-
dev+unsubscribe@**googlegroups.com<openni-dev%2Bunsu...@googlegroups.com>
>>> .
>>> >>> For more options, visit
this group at
>>>
>>> >>> http://groups.google.com/**group/openni-dev?hl=en<http://groups.google.com/group/openni-dev?hl=en>
>>> >>> Von: alibobar@gmail.
com
>>> >>> Datum: 12.03.2012 09:59
>>>
>>> >>> An: "OpenNI"d...@googlegroups.com>
>>> >>> Betreff: [OpenNI-dev] Re:
Building on debian sid: undefined
>>> reference to
>>> >>>
>>> symbol 'glEnd'
>>> >>>
>>> >>>
>>> >>> Btw, I get the
same result with the master branch.
>>> >>>
>>> >>>
>>> >>> On Mar 12, 9:54 am, Alexander
>>> <alibo...@gmail.com>
wrote:
>>> >>> > You
>>> >>> mean I should grep through the entire openni source?
>>> >>> > Let me remind
>>> you:
this is not 'my' code. It's the unstable
>>> >>> branch
>>> >>> > from github.
>>> >>> >
>>> >>> > I appreciate your
help, but I
>>> still have no idea what to do with it.
>>> >>> >
>>> >>> > On Mar 12, 9:12 am,
>>> >>> "stevenm...
@bluewin.ch" <stevenm...@bluewin.
>>> ch>
>>> >>> > wrote:
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> >
>>> >>> > > > glVertex2f
(GL_WIN_SIZE_X, 0);
>>> >>> > > > // bottom right
>>>
>>> >>> > >
>>> >>> > glTexCoord2f
((float)nXRes/(**float)
>>> >>> > > > g_nTexMapX, (float)nYRes/(float)
>>> >>> > >
>>> g_nTexMapY);
>>> >>> > >
>>>
>>> > glVertex2f(GL_WIN_SIZE_X, GL_WIN_SIZE_Y);
>>> >>> > > > // bottom left
>>>
>>> >>> >
>>> >>> > > > glTexCoord2f(0,
>>> >>> >
>>> >>> >
>>> >>> > (float)nYRes/(float)g_**nTexMapY);> glVertex2f
'OpenNI/Platform/Linux/**CreateRedist/
/x86-Release/NiSimpleViewer.**o:
>>> >>> >
>>> >>> > > > undefined
>>> reference to> symbol
>>> >>> >
>>> >>> > >
'glEnd'/usr/bin/ld:
>>> >>> note: 'glEnd'> > is defined in DSO /usr/lib/libGL.so.1 so
>>>
>>> >>> > > > > try
>>> >>>
>
>>> >>> > > > adding it to the linker
>>> >>> >
>>> >>> > > command
>>> >>> line> /usr/lib/libGL.so.1: could not
>>> read> > symbols: Invalid operation
>>> >>> > > > > collect2: ld
>>> >>> >
>>> >>> > > > returned 1 exit
>>> >>> >
>>> >>>
>>> >>> > > status>
>>> make[1]: *** [../../../Bin/x86-Release/**Sample-> >
>>> >>> NiSimpleViewer] Error 1
/home/dreamer/Sources/kinect/**OpenNI/
>>> >>> >
>>> >>> > > > > Platform/Linux/CreateRedist/..**/Build
>>>
>>> >>> > >
> >
>>> >>> /home/dreamer/Sources/kinect/
>>> >>> >
>>> >>> > >
OpenNI/Platform/Linux/**CreateRedist/Output/**BuildOpenNI.txt>
>>> >
>>> >>> Building Failed!
>>> >>> >
>>> >>> > >
>>> >>> > > --
>>> >>> > > > > You received this message
>>> >>> > > because you
>>> >>> > > > >
>>> are subscribed to
the Google Groups "OpenNI" group.
>>> >>> >
>>> >>> > > > To post to this group,
>>> >>> >
>>> >>> > > > send email
>>> to openni-
>>> >>> >
>>> >>> > >d...@googlegroups.com.
>>> >>> >
>>> >>> > > > > To unsubscribe from
>>> >>> this
group, send email to
>>> openni-
>>> >>> >
>>> >>> > > >dev+unsubscribe@googlegroups.**com<dev%
2Bunsu...@googlegroups.com>
>>> .
>>> >>> > > > For more options, visit this
>>> >>> > > > >
>>> >>> group
>>>
athttp://groups.google.com/**group/openni-dev<http://groups.google.com/group/openni-dev>
>>> ?
>>> >>> >
>>> >>> > > >
hl=en.
>>> >>> >
>>> >>> > > > --
>>> >>> > > > You received
>>> >>> >
>>> >>>
>>> > > this message
>>> >>> because
you are subscribed to the Google Groups "OpenNI" group.> To
>>> post
>>> >>> to this
>>> >>> > > >
>>> group, send
email to
>>> >>> >
>>> >>> > >
>>> >>> openn...@googlegroups.com.
>>> >>> >
>>> >>> > > > To unsubscribe from this
group,
>>> send email to openni-
>>> >>> > > >
>>> >>> dev+unsubscribe@googlegroups.
>>> >>> > > com.
>>> >>> > > >
For more options, visit this
>>> group athttp://
>>> >>> groups.google.com/group/**openni-<http://groups.google.com/group/openni->
>>> >>> dev?hl=en.
>>> >>> >
>>> >>>
> > --
>>> >>> > > You received this
>>> >>> > >
>>> message because you are subscribed to the Google Groups "OpenNI"
>>> >>> group.
>>> >>> >
>>> >>> > To post to this group, send
>>> email to openni-
>>> >>> > >d...@googlegroups.com.
>>> >>> > > To unsubscribe from this group, send email
>>> >>> to openni-
>>> dev+unsubscribe@googlegroups.**com <dev%
2Bunsu...@googlegroups.com>.
>>> >>> > > For more
>>> >>> > > options, visit this group athttp://groups.google.
>>>
>>>
>>> com/group/openni-dev?hl=en.
>>> >>>
>>> >>> --
>>> >>> You received this message because you are subscribed
to the Google
>>> >>>
>>> Groups "OpenNI"
>>> >>> group.
>>> >>> To post to this group, send email to openni-
d...@googlegroups.com.
>>> >>> To unsubscribe
>>> from this group, send email to
>>> >>> openni-
dev+unsubscribe@**googlegroups.com<openni-dev%2Bunsu...@googlegroups.com>
>>> .
>>> >>> For more options, visit
this group at
>>>
>>> >>> http://groups.google.com/**group/openni-dev?hl=en<http://groups.google.com/group/openni-dev?hl=en>
>>> .
>>>
>>>
>>> >>>
>>> >>>
>>>
>>> --
>>> You received this message because you are
>>> subscribed to the Google Groups
"OpenNI" group.
>>> To view this discussion on the web visit https://groups.google.com/d/**
>>> msg/openni-dev/-/UU7EzSoaGzAJ<https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ>
>>> .
>>> To post to
this
>>> group, send email to openn...@googlegroups.com.
>>> To unsubscribe from this group, send email to openni-
>>> dev+unsubscribe@googlegroups.**com <dev%2Bunsu...@googlegroups.com>.
>>> For more options, visit this group at http://groups.google.com/**
>>> group/openni-dev?hl=en <http://groups.google.com/group/openni-dev?hl=en>
>>> .
>>>
>>>
>>> --
>> You received
this message because you are subscribed to the Google Groups
>> "OpenNI" group.
>> To view this discussion on the web
visit
>> https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ.
>>
>> To post to this group, send email to openni-
d...@googlegroups.com.
>> To unsubscribe from this group, send email to
>> openni-dev+...@googlegroups.com.
>>
For more options, visit this group at
>> http://groups.google.com/group/openni-dev?hl=en.
>>
>
>
--
You received this message because you are subscribed
to the Google Groups "OpenNI" group.
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
dev+unsubscribe@**googlegroups.com<openni-dev%2Bunsubscribe@googlegroups.com>
dev+unsubscribe@**googlegroups.com<openni-dev%2Bunsubscribe@googlegroups.com>
>>> .
>>> >>> For more options, visit
this group at
>>>
>>> >>> http://groups.google.com/**group/openni-dev?hl=en<http://groups.google.com/group/openni-dev?hl=en>
>>> .
>>>
>>>
>>> >>>
>>> >>>
>>>
>>> --
>>> You received this message because you are
>>> subscribed to the Google Groups
"OpenNI" group.
>>> To view this discussion on the web visit https://groups.google.com/d/**
>>> msg/openni-dev/-/UU7EzSoaGzAJ<https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ>
>>> .
>>> To post to
this
>>> group, send email to openn...@googlegroups.com.
>>> To unsubscribe from this group, send email to openni-
>>> dev+unsubscribe@googlegroups.**com <dev%2Bunsubscribe@googlegroups.com>.
>>> For more options, visit this group at http://groups.google.com/**
>>> group/openni-dev?hl=en <http://groups.google.com/group/openni-dev?hl=en>
>>> .
>>>
>>>
>>> --
>> You received
this message because you are subscribed to the Google Groups
>> "OpenNI" group.
>> To view this discussion on the web
visit
>> https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ.
>>
>> To post to this group, send email to openni-
d...@googlegroups.com.
>> To unsubscribe from this group, send email to
>>
For more options, visit this group at
>> http://groups.google.com/group/openni-dev?hl=en.
>>
>
>
--
You received this message because you are subscribed
to the Google Groups "OpenNI" group.
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
This _is_ a bug in OpenNI. A few Makefiles need to be patched (see below).
Cheers,
Radu.
--
http://pointclouds.org
---------------------------
--- a/Platform/Linux/Build/Samples/NiHandTracker/Makefile
+++ b/Platform/Linux/Build/Samples/NiHandTracker/Makefile
@@ -11,7 +11,7 @@ SRC_FILES = ../../../../../Samples/NiHandTracker/*.cpp
ifeq ("$(OSTYPE)","Darwin")
LDFLAGS += -framework OpenGL -framework GLUT
else
- USED_LIBS += glut
+ USED_LIBS += glut GL
endif
USED_LIBS += OpenNI
--- a/Platform/Linux/Build/Samples/NiSimpleViewer/Makefile
+++ b/Platform/Linux/Build/Samples/NiSimpleViewer/Makefile
@@ -11,7 +11,7 @@ EXE_NAME = Sample-NiSimpleViewer
ifeq ("$(OSTYPE)","Darwin")
LDFLAGS += -framework OpenGL -framework GLUT
else
- USED_LIBS += glut
+ USED_LIBS += glut GL
endif
USED_LIBS += OpenNI
--- a/Platform/Linux/Build/Samples/NiUserSelection/Makefile
+++ b/Platform/Linux/Build/Samples/NiUserSelection/Makefile
@@ -12,7 +12,7 @@ ifeq "$(GLUT_SUPPORTED)" "1"
ifeq ("$(OSTYPE)","Darwin")
LDFLAGS += -framework OpenGL -framework GLUT
else
- USED_LIBS += glut
+ USED_LIBS += glut GL
endif
else
ifeq "$(GLES_SUPPORTED)" "1"
--- a/Platform/Linux/Build/Samples/NiUserTracker/Makefile
+++ b/Platform/Linux/Build/Samples/NiUserTracker/Makefile
@@ -12,7 +12,7 @@ ifeq "$(GLUT_SUPPORTED)" "1"
ifeq ("$(OSTYPE)","Darwin")
LDFLAGS += -framework OpenGL -framework GLUT
else
- USED_LIBS += glut
+ USED_LIBS += glut GL
endif
else
ifeq "$(GLES_SUPPORTED)" "1"
--- a/Platform/Linux/Build/Samples/NiViewer/Makefile
+++ b/Platform/Linux/Build/Samples/NiViewer/Makefile
@@ -11,7 +11,7 @@ SRC_FILES = ../../../../../Samples/NiViewer/*.cpp
ifeq ("$(OSTYPE)","Darwin")
LDFLAGS += -framework OpenGL -framework GLUT
else
- USED_LIBS += glut
+ USED_LIBS += glut GL
endif
USED_LIBS += OpenNI
--------------------
On 03/17/2012 04:36 AM, Alexander wrote:
> Yes, I have no installed the unstable binary package and it works (needed it for PyOpenNI).
> However I would feel more comfortable if I was able to compile the full suite locally.
>
>
>
> On Saturday, 17 March 2012 09:24:29 UTC+1, nomad wrote:
>
> hi
> its ok
> please following the steps as igorbb wrote.
> regards nomad
> ----Urspr�ngliche Nachricht----
> Von:
> alib...@gmail.com <mailto:alib...@gmail.com>
> Datum: 16.03.2012 10:58
> An: <openn...@googlegroups.com <mailto:openn...@googlegroups.com>>
> Kopie: <steve...@bluewin.ch <mailto:steve...@bluewin.ch>>
> Betreff:
> Re: Re: [OpenNI-dev] Re: Building on debian sid: undefined reference to symbol 'glEnd'
>
> I'm sorry if I appeared
> (c)rude in my last replies. I appreciate all the
> help, even though some of it wasn't very helpful for me.
> All the
> requisites are already installed and I have tried both branches, so
> I will try the other method you linked to.
>
>
> regards
>
> On Friday, 16 March 2012 10:14:19 UTC+1, igorbb wrote:
> >
> > Check you have the installed libraries :
> >
> >
> libusb-1.0-0-dev
> > *freeglut3-dev*
> > libboost-all-dev
> > libwxbase2.8-dev
> > libwxgtk2.8-dev
> > wx-common
> >
> >
> > Try to
> compile it now.. if it does not work check if you have the same
> > problems with the stable branch ?
> >
> > IF still it
> does not work:
> >
> > Try doing this way :
> >
> > http://www.openni.org/Downloads/OpenNIModules.aspx <http://www.openni.org/Downloads/OpenNIModules.aspx>
> >
> > Unzip the modules to a folder (on my case it worked with the
> stable
> > version) ,
> >
> > rename it openni sensor and nite
> >
> > *Install Openni*
> > cd openni
> > sudo sh install.sh
> > cd
> ..
> >
> > *If you Are using Microsoft kinect don't install the sensor version from
> > the website, install this one: https://github.com/avin2/SensorKinect <https://github.com/avin2/SensorKinect>
> >>> ----Urspr�ngliche Nachricht----
> >>> Von: alib...@gmail.com <mailto:alib...@gmail.com>
> >>> Datum:
> 14.03.2012 10:09
> >>> An:
> >>> <openn...@googlegroups.com <mailto:openn...@googlegroups.com>>
> >>> Kopie: <steve...@bluewin.ch <mailto:steve...@bluewin.ch>>
> >>> >>> ----Urspr�ngliche Nachricht----
> >>> >>> Von:
>
> >>> alib...@gmail.com <mailto:alib...@gmail.com>
> >>> >>> Datum: 12.03.2012 09:59
> >>> >>> An: "OpenNI"d...@googlegroups.com <mailto:d...@googlegroups.com>>
> >>> >>> Betreff:
> [OpenNI-dev] Re:
> >>> Building on debian sid: undefined reference to
> >>> >>> symbol 'glEnd'
> >>> >>>
> >>> >>>
> >>> >>>
> Btw, I get the same result with the
> >>> master branch.
> >>> >>>
> >>> >>>
> >>> >>> On Mar 12, 9:54 am, Alexander <alibo...
> >>> Urspr�ngliche Nachricht----
> >>> >>> > > > ----Urspr�ngliche
> >>> >>> Nachricht----
> >>> >>> > > >
> >>>
> Von: alibo...@gmail.com
> >>> >>> > > > Datum: 10.03.2012
> >>> >>> > > 14:
> >>> >>> > > > 44
> >>> >>> > > > An: "OpenNI"
> dev@googlegroups.
> >>> com>
> >>> >>> > > > Betreff: [OpenNI-dev] Re: Building on debian sid: undefined
> >>> >>> > >
> reference to
> >>> >>> > > > symbol
> >>> >>>
> >>> 'glEnd'
> >>> >>> >
> >>> >>> > > > Yes, I have all the requirements
> installed (from the README).
> >>> >>> > > > This was the
> >>> >>> > >
> >>> output of
> >>> >>> the
> >>> >>> > > >
> 'OpenNI/Platform/Linux/**CreateRedist/
> >>> >>> > > > RedistMaker' script.
> >>> >>> >
> >>> >>> > > > On Mar
> >>> 10, 10:01
> am, "stevenm...
> >>> >>> >
> >>> >>> >
> >>> >>> > @bluewin.ch <http://bluewin.ch>" @bluewin.ch <http://bluewin.ch>>
> >>> >>> > > > wrote:> hi
> >>> >>> > > > > have
> you opengl-
> >>> headers and libs??? into
> >>> >>> compileScript
> >>> >>> > > RedistMaker ???
> >>> >>> > > > > glEnd
> should be
> >>> >>> > > > glEnd().....
> >>>
> >>> >>> > > > > regards nomad
> >>> >>> >
> >>> >>> > > > > ----
> >>> >>>
> Urspr�ngliche Nachricht----
> >>> >>> > > > > Von:
> >>> >>> >
> >>> >>> > >alibo...
> >>> @gmail.com <http://gmail.com>> > Datum: 09.03.2012 23:
> >>> >>> > >d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >>> >>> >
> >>> >>> > > > > To unsubscribe from
> >>> >>> this
> group, send email to
> >>> openni-
> >>> >>> >
> >>> >>> > > >dev+unsubscribe@googlegroups.**com<dev%
> 2Bunsu...@googlegroups.com <mailto:2Bunsu...@googlegroups.com>>
> >>> .
> >>> >>> > > > For more options, visit this
> >>> >>> > > > >
> >>> >>> group
> >>>
> athttp://groups.google.com/**group/openni-dev
> <http://groups.google.com/**group/openni-dev><http://groups.google.com/group/openni-dev
> <http://groups.google.com/group/openni-dev>>
> >>> ?
> >>> >>> >
> >>> >>> > > >
> hl=en.
> >>> >>> >
> >>> >>> > > > --
> >>> >>> > > > You received
> >>> >>> >
> >>> >>>
> >>> > > this message
> >>> >>> because
> you are subscribed to the Google Groups "OpenNI" group.> To
> >>> post
> >>> >>> to this
> >>> >>> > > >
> >>> group, send
> email to
> >>> >>> >
> >>> >>> > >
> >>> >>> openn...@googlegroups.com <mailto:openn...@googlegroups.com>.
> >>> >>> >
> >>> >>> > > > To unsubscribe from this
> group,
> >>> send email to openni-
> >>> >>> > > >
> >>> >>> dev+unsubscribe@googlegroups.
> >>> >>> > > com.
> >>> >>> > > >
> For more options, visit this
> >>> group athttp://
> >>> >>> groups.google.com/group/**openni-
> <http://groups.google.com/group/**openni-><http://groups.google.com/group/openni-
> <http://groups.google.com/group/openni->>
> >>> >>> dev?hl=en.
> >>> >>> >
> >>> >>>
> > > --
> >>> >>> > > You received this
> >>> >>> > >
> >>> message because you are subscribed to the Google Groups "OpenNI"
>
> >>> >>> group.
> >>> >>> >
> >>> >>> > To post to this group, send
> >>> email to openni-
> >>> >>> > >d...@googlegroups.com <mailto:d...@googlegroups.com>.
>
> >>> >>> > > To unsubscribe from this group, send email
> >>> >>> to openni-
> >>> dev+unsubscribe@googlegroups.**com <dev%
> 2Bunsu...@googlegroups.com <mailto:2Bunsu...@googlegroups.com>>.
> >>> >>> > > For more
> >>> >>> > > options, visit this group athttp://groups.google.
> >>>
> >>>
> >>> com/group/openni-dev?hl=en.
> >>> >>>
> >>> >>> --
> >>> >>> You received this message because you are subscribed
> to the Google
> >>> >>>
> >>> Groups "OpenNI"
> >>> >>> group.
> >>> >>> To post to this group, send email to openni-
> d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >>> >>> To unsubscribe
> >>> from this group, send email to
> >>> >>> openni-
> dev+unsubscribe@**googlegroups.com <http://googlegroups.com><openni-dev%2Bunsu...@googlegroups.com
> <mailto:openni-dev%252Buns...@googlegroups.com>>
> >>> .
> >>> >>> For more options, visit
> this group at
> >>>
> >>> >>> http://groups.google.com/**group/openni-dev?hl=en
> <http://groups.google.com/**group/openni-dev?hl=en><http://groups.google.com/group/openni-dev?hl=en
> >>> >>> ----Urspr�ngliche Nachricht----
> >>> >>> Von: alibobar@gmail.
> com
> >>> >>> Datum: 12.03.2012 09:59
> >>>
> >>> >>> An: "OpenNI"d...@googlegroups.com <mailto:d...@googlegroups.com>>
> >>> >>> Betreff: [OpenNI-dev] Re:
> Building on debian sid: undefined
> >>> reference to
> >>> >>>
> >>> symbol 'glEnd'
> >>> >>>
> >>> >>>
> >>> >>> Btw, I get the
> same result with the master branch.
> >>> >>>
> >>> >>>
> >>> >>> On Mar 12, 9:54 am, Alexander
> >>> <alibo...@gmail.com>
> wrote:
> >>> >>> > You
> >>> >>> mean I should grep through the entire openni source?
> >>> >>> > Let me remind
> >>> you:
> this is not 'my' code. It's the unstable
> >>> >>> branch
> >>> >>> > from github.
> >>> >>> >
> >>> >>> > I appreciate your
> help, but I
> >>> still have no idea what to do with it.
> >>> >>> >
> >>> >>> > On Mar 12, 9:12 am,
> >>> >>> "stevenm...
> @bluewin.ch <http://bluewin.ch>" <stevenm...@bluewin.
> >>> ch>
> >>> >>> > wrote:
> >>> >>> >
> >>> >>> >
> >>> >>> >
> >>> >>> >
> >>> >>> >
> >>> >>> >
>
> >>> >>> >
> >>> >>> > > hi
> >>> >>> > > look in your code
> >>> >>> > > if you make a
> >>>
> >>> >>> >
> >>> >>> >
> glPushMatrix();
> >>> >>> > > .....
> >>> >>> >
> >>> >>> > > > this is wrong glColor4f(1,1,1,1); float
> >>> >>> >
>
> >>> >>> >
> >>> > (1.0f,1.0f,1.0f,1.0f)
> >>> >>> >
> >>> >>> > .......
> >>> >>> >
> >>> >>> > > glBegin
> (GL_QUADS);
> >>> >>> > >
> >>> ......
> >>> >>> > > ......
> >>> >>> >
> >>> >>> >
> >>> >>>
> > glEnd(); //THIS IS
> >>> >>> > > glPopMatrix()
> >>> >>> >
> >>> >>>
> >>> > > hope its useful
> >>> >>> > >
> regards nomad
> >>> >>> >
> >>> >>> > > ----
> >>> >>> Urspr�ngliche Nachricht----
> >>> >>> >
> >>> >>> > > Von: alibo...
> >>>
> @gmail.com <http://gmail.com>
> >>> >>> > > Datum: 11.03.2012 12:49
> >>> >>> > > An: "OpenNI"d...@googlegroups.com <mailto:d...@googlegroups.com>>
> >>> >>> > > > ----Urspr�ngliche
> >>> >>>
> >>> Nachricht----
> >>> >>> > > >
> Von: alibo...@gmail.com
> >>> >>> > > > Datum: 10.03.2012
> >>> >>> > > 14:
> >>> >>> > > > 44
> >>> >>> > > > An:
> >>> "OpenNI"
> d...@googlegroups.com <mailto:d...@googlegroups.com>>
> >>> >>> > > > Betreff: [OpenNI-dev] Re: Building on debian sid: undefined
> >>> >>> > > reference
>
> >>> to
> >>> >>> > > > symbol
> >>> >>> 'glEnd'
> >>> >>> >
> >>> >>> > > > Yes, I have all the requirements installed (from
> the README).
> >>> >>> > >
> >>> > This was the
> >>> >>> > > output of
> >>> >>> the
> >>> >>> > > >
> 'OpenNI/Platform/Linux/**CreateRedist/
> >>> >>> > > > RedistMaker' script.
> >>>
> >>> >>> >
> >>> >>> > > > On Mar 10, 10:01
> am, "stevenm...
> >>> >>> >
> >>> >>> >
> >>> >>> > @bluewin.ch <http://bluewin.ch>" @bluewin.ch <http://bluewin.ch>>
> >>> >>> > > > wrote:> hi
> >>> >>> >
> >>> > > >
> have you opengl-headers and libs??? into
> >>> >>> compileScript
> >>> >>> > > RedistMaker ???
> >>> >>> > > > > glEnd
> should be
> >>>
> >>> >>> > > > glEnd().....
> >>> >>> > > > > regards nomad
> >>> >>> >
> >>> >>> > > > > ----
> >>> >>>
> Urspr�ngliche Nachricht----
> >>> >>> > >d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >>> >>> >
> >>> >>> > > > > To unsubscribe from
> >>> >>> this
> group, send email to
> >>> openni-
> >>> >>> >
> >>> >>> > > >dev+unsubscribe@googlegroups.**com<dev%
> 2Bunsu...@googlegroups.com <mailto:2Bunsu...@googlegroups.com>>
> >>> .
> >>> >>> > > > For more options, visit this
> >>> >>> > > > >
> >>> >>> group
> >>>
> athttp://groups.google.com/**group/openni-dev
> <http://groups.google.com/**group/openni-dev><http://groups.google.com/group/openni-dev
> <http://groups.google.com/group/openni-dev>>
> >>> ?
> >>> >>> >
> >>> >>> > > >
> hl=en.
> >>> >>> >
> >>> >>> > > > --
> >>> >>> > > > You received
> >>> >>> >
> >>> >>>
> >>> > > this message
> >>> >>> because
> you are subscribed to the Google Groups "OpenNI" group.> To
> >>> post
> >>> >>> to this
> >>> >>> > > >
> >>> group, send
> email to
> >>> >>> >
> >>> >>> > >
> >>> >>> openn...@googlegroups.com <mailto:openn...@googlegroups.com>.
> >>> >>> >
> >>> >>> > > > To unsubscribe from this
> group,
> >>> send email to openni-
> >>> >>> > > >
> >>> >>> dev+unsubscribe@googlegroups.
> >>> >>> > > com.
> >>> >>> > > >
> For more options, visit this
> >>> group athttp://
> >>> >>> groups.google.com/group/**openni-
> <http://groups.google.com/group/**openni-><http://groups.google.com/group/openni-
> <http://groups.google.com/group/openni->>
> >>> >>> dev?hl=en.
> >>> >>> >
> >>> >>>
> > > --
> >>> >>> > > You received this
> >>> >>> > >
> >>> message because you are subscribed to the Google Groups "OpenNI"
>
> >>> >>> group.
> >>> >>> >
> >>> >>> > To post to this group, send
> >>> email to openni-
> >>> >>> > >d...@googlegroups.com <mailto:d...@googlegroups.com>.
>
> >>> >>> > > To unsubscribe from this group, send email
> >>> >>> to openni-
> >>> dev+unsubscribe@googlegroups.**com <dev%
> 2Bunsu...@googlegroups.com <mailto:2Bunsu...@googlegroups.com>>.
> >>> >>> > > For more
> >>> >>> > > options, visit this group athttp://groups.google.
> >>>
> >>>
> >>> com/group/openni-dev?hl=en.
> >>> >>>
> >>> >>> --
> >>> >>> You received this message because you are subscribed
> to the Google
> >>> >>>
> >>> Groups "OpenNI"
> >>> >>> group.
> >>> >>> To post to this group, send email to openni-
> d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >>> >>> To unsubscribe
> >>> from this group, send email to
> >>> >>> openni-
> dev+unsubscribe@**googlegroups.com <http://googlegroups.com><openni-dev%2Bunsu...@googlegroups.com
> <mailto:openni-dev%252Buns...@googlegroups.com>>
> >>> .
> >>> >>> For more options, visit
> this group at
> >>>
> >>> >>> http://groups.google.com/**group/openni-dev?hl=en
> <http://groups.google.com/**group/openni-dev?hl=en><http://groups.google.com/group/openni-dev?hl=en
> <http://groups.google.com/group/openni-dev?hl=en>>
> >>> .
> >>>
> >>>
> >>> >>>
> >>> >>>
> >>>
> >>> --
> >>> You received this message because you are
> >>> subscribed to the Google Groups
> "OpenNI" group.
> >>> To view this discussion on the web visit https://groups.google.com/d/**
> >>> msg/openni-dev/-/UU7EzSoaGzAJ<https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ
> <https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ>>
> >>> .
> >>> To post to
> this
> >>> group, send email to openn...@googlegroups.com <mailto:openn...@googlegroups.com>.
> >>> To unsubscribe from this group, send email to openni-
>
> >>> dev+unsubscribe@googlegroups.**com <dev%2Bunsu...@googlegroups.com
> <mailto:dev%252Buns...@googlegroups.com>>.
> >>> For more options, visit this group at http://groups.google.com/**
> >>> group/openni-dev?hl=en <http://groups.google.com/group/openni-dev?hl=en
> <http://groups.google.com/group/openni-dev?hl=en>>
> >>> .
> >>>
> >>>
> >>> --
> >> You received
> this message because you are subscribed to the Google Groups
> >> "OpenNI" group.
> >> To view this discussion on the web
> visit
> >> https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ
> <https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ>.
> >>
> >> To post to this group, send email to openni-
> d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >> To unsubscribe from this group, send email to
> >> openni-dev+...@googlegroups.com <mailto:openni-dev%2Bunsu...@googlegroups.com>.
> >>
> For more options, visit this group at
> >> http://groups.google.com/group/openni-dev?hl=en <http://groups.google.com/group/openni-dev?hl=en>.
> >>
> >
> >
>
> --
> You received this message because you are subscribed
> to the Google Groups "OpenNI" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J
> <https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J>.
> To post to this
> group, send email to openn...@googlegroups.com <mailto:openn...@googlegroups.com>.
> To unsubscribe from this group, send email to openni-
> dev+uns...@googlegroups.com <mailto:dev%2Bunsu...@googlegroups.com>.
> For more options, visit this group at http://groups.google.com/group/openni-dev?hl=en
> <http://groups.google.com/group/openni-dev?hl=en>.
>
>
> --
> You received this message because you are subscribed to the Google Groups "OpenNI" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/TS8BPJQhid8J.
> To post to this group, send email to openn...@googlegroups.com.
> To unsubscribe from this group, send email to openni-dev+...@googlegroups.com.
----Ursprüngliche Nachricht----
Von: ru...@willowgarage.com
Datum: 17.03.2012
19:03
An: <openn...@googlegroups.com>
Kopie: "Alexander"<alib...@gmail.com>, <steve...@bluewin.ch>
Betreff: Re:
[OpenNI-dev] Re: Building on debian sid: undefined reference to symbol 'glEnd'
Everyone,
USED_LIBS += OpenNI
--------------------
> ----Ursprüngliche Nachricht----
> Von:
> alib...@gmail.com <mailto:
alib...@gmail.com>
> Datum: 16.03.2012 10:58
> An: <openn...@googlegroups.com <mailto:openni-
d...@googlegroups.com>>
> >>> ----Ursprüngliche Nachricht----
> >>> Von: alib...@gmail.com
<mailto:alib...@gmail.com>
> >>> Datum:
> 14.03.2012 10:09
> >>> An:
> >>> <openni-dev@googlegroups.
> >>> >>> ----Ursprüngliche Nachricht----
> >>> Ursprüngliche Nachricht----
> >>> >>> > > > make a
> >>> >>> > > > ---
> >>> >>>
> >>> > >
> >>> >>> > glPushMatrix();
> >>> >>> > > > // bottom left
> >>> >>> >
> >>>
> >>> > > >
> >>> glTexCoord2f(0,
> >>> >>> >
> >>> >>> >
> >>> >>> > (float)nYRes/(float)g_**nTexMapY);> glVertex2f
> (0,
> >>> >>> > > FAILURE ITS CORRESPONDED WITH glBegin
> >>>
(GL_QUAD);
> >>> >>> >
> >>> >>> > > > BUT YOU NO glPopMatrix()
>
> >>> >>> > > >
> >>> >>>
------------------------
> >>> >>> > > > regards
> >>> >>> >
> >>> >>>
> >>> > > nomad
> >>> >>> >
> >>> >>>
> > > > --------------------------
> >>> >>> >
> >>> >>> > > > ----Ursprüngliche
> Ursprüngliche Nachricht----
> 2Bunsu...@googlegroups.com <mailto:2Bunsubscribe@googlegroups.
> >>> > -I/usr/include/GL -I/usr/include/ni -
> >>> >>> ----Ursprüngliche Nachricht----
> >>> >>> Ursprüngliche Nachricht----
> > > xnGetStatusString(rc));
> >>> >>> > > > return;
> >>>
> >>> >>> > > > }
> >>> >>> > > > ----Ursprüngliche
> >>> >>>
> >>> Nachricht----
> Ursprüngliche Nachricht----
> >>> dev+unsubscribe@googlegroups.**com <dev%2Bunsubscribe@googlegroups.
> For more options, visit this group at http://groups.google.com/group/openni-dev?hl=en.
--
You received this
message because you are subscribed to the Google Groups "OpenNI" group.
To post to this group, send email to openni-
----Ursprüngliche Nachricht----
Von: alib...@gmail.com
Datum: 17.03.2012 12:36
An: <openn...@googlegroups.com>
Kopie: <steve...@bluewin.ch>
Betreff: Re: Re: Re: [OpenNI-dev] Re: Building on debian sid: undefined reference to
symbol 'glEnd'
Yes, I have no installed the unstable binary package and it works (needed
it for PyOpenNI).
> >>> <openni-
d...@googlegroups.com>
> 2Bunsu...@googlegroups.com>.
> >>> >>> > > For more
> >>> >>> > > options, visit this group athttp://groups.
google.
> >>>
> >>>
> >>> com/group/openni-dev?hl=en.
> >>> >>>
> >>> >>> --
> >>> >>> You received this message
because you are subscribed
> to the Google
> >>> >>>
> >>> Groups "OpenNI"
> >>> >>> group.
> >>> >>> To post to
this group, send email to openni-
> d...@googlegroups.com.
> >>> >>> To unsubscribe
> >>> from this group, send email
to
> >>> >>> openni-
> dev+unsubscribe@**googlegroups.com<
> openni-dev%2Bunsu...@googlegroups.com>
> >>> <alibo...
@gmail.com>
> wrote:
> >>> >>> > You
> >>> >>> mean I should grep through the entire openni source?
> >>> >>> > Let
me remind
> >>> you:
> this is not 'my' code. It's the unstable
> >>> >>> branch
> >>> >>> > from github.
> >>> >>>
>
> >>> >>> > I appreciate your
> help, but I
> >>> still have no idea what to do with it.
> >>> >>> >
> >>> >>> > On
Mar 12, 9:12 am,
> >>> >>> > > > > Platform/Linux/CreateRedist/..**/Build
> >>>
> >>> >>> > >
> > >
> >>> >>>
/home/dreamer/Sources/kinect/
> >>> >>> >
> >>> >>> > >
> OpenNI/Platform/Linux/**CreateRedist/Output/**BuildOpenNI.
txt>
> >>> >
> >>> >>> Building Failed!
> >>> >>> >
> >>> >>> > >
>
> >>> >>> > > --
> >>> >>> > > > > You received
this message
> >>> >>> > > because you
> >>> >>> > > > >
> >>> are subscribed to
> the Google Groups "OpenNI" group.
> >>> >>> >
> >>> >>> > > > To post to this group,
> >>> >>> >
> >>> >>> > > > send email
>
> >>> to openni-
> >>> >>>
>
> >>> >>> > >d...@googlegroups.com.
> >>> >>> >
> >>> >>> > > > > To unsubscribe from
> >>> >>> this
> group, send
email to
> >>> openni-
> >>> >>> >
> >>> >>> > > >dev+unsubscribe@googlegroups.**com<dev%
> 2Bunsubscribe@googlegroups.
> 2Bunsu...@googlegroups.com>.
> >>> >>> > > For more
> >>> >>> > > options, visit this group athttp://groups.
google.
> >>>
> >>>
> >>> com/group/openni-dev?hl=en.
> >>> >>>
> >>> >>> --
> >>> >>> You received this message
because you are subscribed
> to the Google
> >>> >>>
> >>> Groups "OpenNI"
> >>> >>> group.
> >>> >>> To post to
this group, send email to openni-
> d...@googlegroups.com.
> >>> >>> To unsubscribe
> >>> from this group, send email
to
> >>> >>> openni-
> dev+unsubscribe@**googlegroups.com<
> openni-dev%2Bunsu...@googlegroups.com>
> >>> .
> >>>
>>> For more options, visit
> this group at
> >>>
> >>> >>> http://groups.google.com/**group/openni-dev?hl=en<
> http://groups.google.com/group/openni-dev?hl=en>
> >>> .
> >>>
> >>>
> >>> >>>
> >>> >>>
> >>>
> >>> --
> >>> You
received this message because you are
> >>> subscribed to the Google Groups
> "OpenNI" group.
> >>> To view this
discussion on the web visit
> https://groups.google.com/d/**
> >>> msg/openni-dev/-/UU7EzSoaGzAJ<
> https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ>
> >>> .
> >>> To post to
> this
> >>> group, send email
to openn...@googlegroups.com.
> >>> To unsubscribe from this group, send email to openni-
>
> >>>
dev+unsubscribe@googlegroups.**com <dev%2Bunsu...@googlegroups.com
> >.
> >>> For more options, visit this group at http://groups.google.com/**
> >>> group/openni-dev?hl=en <
> http://groups.google.com/group/openni-dev?hl=en>
> >>> .
> >>>
> >>>
> >>> --
> >> You received
> this message
because you are subscribed to the Google Groups
> >> "OpenNI" group.
> >> To view this discussion on the web
> visit
> >> https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ.
> >>
> >> To post to this group, send email to openni-
> d...@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> openni-dev+unsubscribe@googlegroups.
com.
> >>
> For more options, visit this group at
> >> http://groups.google.com/group/openni-dev?hl=en.
> >>
> >
> >
>
> --
> You received this message because you are
subscribed
> to the Google Groups "OpenNI" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J.
> To post to this
> group, send email to openni-
d...@googlegroups.com.
> To unsubscribe from this group, send email to openni-
> dev+uns...@googlegroups.com.
> For
more options, visit this group at
> http://groups.google.com/group/openni-dev?hl=en.
>
>
>
--
You received this message because you are subscribed to
the Google Groups "OpenNI" group.
To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/TS8BPJQhid8J.
To post to this
group, send email to openn...@googlegroups.com.
To unsubscribe from this group, send email to openni-
> ----Urspr�ngliche Nachricht----
> Von:
> alib...@gmail.com <mailto:alib...@gmail.com>
> Datum: 16.03.2012 10:58
> An: <openn...@googlegroups.com <mailto:openni-dev@googlegroups.com>>
> >>> ----Urspr�ngliche Nachricht----
> >>> Von: alib...@gmail.com <mailto:alib...@gmail.com>
> >>> Datum:
> 14.03.2012 10:09
> >>> An:
> >>> <openn...@googlegroups.com <mailto:openni-dev@googlegroups.com>>
> >>> >>> ----Urspr�ngliche Nachricht----
> >>> Urspr�ngliche Nachricht----
> >>> >>> > > > ----Urspr�ngliche
> Urspr�ngliche Nachricht----
> 2Bunsu...@googlegroups.com <mailto:2Bunsubscribe@googlegroups.com>>
> >>> .
> >>> >>> > > > For more options, visit this
> >>> >>> > > > >
> >>> >>> group
> >>>
> athttp://groups.google.com/**group/openni-dev
> <http://groups.google.com/**group/openni-dev><http://groups.google.com/group/openni-dev
> <http://groups.google.com/group/openni-dev>>
> >>> ?
> >>> >>> >
> >>> >>> > > >
> hl=en.
> >>> >>> >
> >>> >>> > > > --
> >>> >>> > > > You received
> >>> >>> >
> >>> >>>
> >>> > > this message
> >>> >>> because
> you are subscribed to the Google Groups "OpenNI" group.> To
> >>> post
> >>> >>> to this
> >>> >>> > > >
> >>> group, send
> email to
> >>> >>> >
> >>> >>> > >
> >>> >>> openn...@googlegroups.com <mailto:openni-dev@googlegroups.com>.
> >>> >>> >
> >>> >>> > > > To unsubscribe from this
> group,
> >>> send email to openni-
> >>> >>> > > >
> >>> >>> dev+unsubscribe@googlegroups.
> >>> >>> > > com.
> >>> >>> > > >
> For more options, visit this
> >>> group athttp://
> >>> >>> groups.google.com/group/**openni-
> <http://groups.google.com/group/**openni-><http://groups.google.com/group/openni-
> <http://groups.google.com/group/openni->>
> >>> >>> dev?hl=en.
> >>> >>> >
> >>> >>>
> > > --
> >>> >>> > > You received this
> >>> >>> > >
> >>> message because you are subscribed to the Google Groups "OpenNI"
>
> >>> >>> group.
> >>> >>> >
> >>> >>> > To post to this group, send
> >>> email to openni-
> >>> >>> > >d...@googlegroups.com <mailto:d...@googlegroups.com>.
>
> >>> >>> > > To unsubscribe from this group, send email
> >>> >>> to openni-
> >>> dev+unsubscribe@googlegroups.**com <dev%
> 2Bunsu...@googlegroups.com <mailto:2Bunsubscribe@googlegroups.com>>.
> >>> >>> > > For more
> >>> >>> > > options, visit this group athttp://groups.google.
> >>>
> >>>
> >>> com/group/openni-dev?hl=en.
> >>> >>>
> >>> >>> --
> >>> >>> You received this message because you are subscribed
> to the Google
> >>> >>>
> >>> Groups "OpenNI"
> >>> >>> group.
> >>> >>> To post to this group, send email to openni-
> d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >>> >>> To unsubscribe
> >>> from this group, send email to
> >>> >>> openni-
> dev+unsubscribe@**googlegroups.com <http://googlegroups.com><openni-dev%2Bunsubscribe@googlegroups.com
> <mailto:openni-dev%252Bunsubscribe@googlegroups.com>>
> >>> >>> ----Urspr�ngliche Nachricht----
> >>> >>> Urspr�ngliche Nachricht----
> >>> >>> > > > ----Urspr�ngliche
> Urspr�ngliche Nachricht----
> 2Bunsu...@googlegroups.com <mailto:2Bunsubscribe@googlegroups.com>>
> >>> .
> >>> >>> > > > For more options, visit this
> >>> >>> > > > >
> >>> >>> group
> >>>
> athttp://groups.google.com/**group/openni-dev
> <http://groups.google.com/**group/openni-dev><http://groups.google.com/group/openni-dev
> <http://groups.google.com/group/openni-dev>>
> >>> ?
> >>> >>> >
> >>> >>> > > >
> hl=en.
> >>> >>> >
> >>> >>> > > > --
> >>> >>> > > > You received
> >>> >>> >
> >>> >>>
> >>> > > this message
> >>> >>> because
> you are subscribed to the Google Groups "OpenNI" group.> To
> >>> post
> >>> >>> to this
> >>> >>> > > >
> >>> group, send
> email to
> >>> >>> >
> >>> >>> > >
> >>> >>> openn...@googlegroups.com <mailto:openni-dev@googlegroups.com>.
> >>> >>> >
> >>> >>> > > > To unsubscribe from this
> group,
> >>> send email to openni-
> >>> >>> > > >
> >>> >>> dev+unsubscribe@googlegroups.
> >>> >>> > > com.
> >>> >>> > > >
> For more options, visit this
> >>> group athttp://
> >>> >>> groups.google.com/group/**openni-
> <http://groups.google.com/group/**openni-><http://groups.google.com/group/openni-
> <http://groups.google.com/group/openni->>
> >>> >>> dev?hl=en.
> >>> >>> >
> >>> >>>
> > > --
> >>> >>> > > You received this
> >>> >>> > >
> >>> message because you are subscribed to the Google Groups "OpenNI"
>
> >>> >>> group.
> >>> >>> >
> >>> >>> > To post to this group, send
> >>> email to openni-
> >>> >>> > >d...@googlegroups.com <mailto:d...@googlegroups.com>.
>
> >>> >>> > > To unsubscribe from this group, send email
> >>> >>> to openni-
> >>> dev+unsubscribe@googlegroups.**com <dev%
> 2Bunsu...@googlegroups.com <mailto:2Bunsubscribe@googlegroups.com>>.
> >>> >>> > > For more
> >>> >>> > > options, visit this group athttp://groups.google.
> >>>
> >>>
> >>> com/group/openni-dev?hl=en.
> >>> >>>
> >>> >>> --
> >>> >>> You received this message because you are subscribed
> to the Google
> >>> >>>
> >>> Groups "OpenNI"
> >>> >>> group.
> >>> >>> To post to this group, send email to openni-
> d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >>> >>> To unsubscribe
> >>> from this group, send email to
> >>> >>> openni-
> dev+unsubscribe@**googlegroups.com <http://googlegroups.com><openni-dev%2Bunsubscribe@googlegroups.com
> <mailto:openni-dev%252Bunsubscribe@googlegroups.com>>
> >>> .
> >>> >>> For more options, visit
> this group at
> >>>
> >>> >>> http://groups.google.com/**group/openni-dev?hl=en
> <http://groups.google.com/**group/openni-dev?hl=en><http://groups.google.com/group/openni-dev?hl=en
> <http://groups.google.com/group/openni-dev?hl=en>>
> >>> .
> >>>
> >>>
> >>> >>>
> >>> >>>
> >>>
> >>> --
> >>> You received this message because you are
> >>> subscribed to the Google Groups
> "OpenNI" group.
> >>> To view this discussion on the web visit https://groups.google.com/d/**
> >>> msg/openni-dev/-/UU7EzSoaGzAJ<https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ
> <https://groups.google.com/d/msg/openni-dev/-/UU7EzSoaGzAJ>>
> >>> .
> >>> To post to
> this
> >>> group, send email to openn...@googlegroups.com <mailto:openni-dev@googlegroups.com>.
> >>> To unsubscribe from this group, send email to openni-
>
> >>> dev+unsubscribe@googlegroups.**com <dev%2Bunsubscribe@googlegroups.com
> <mailto:dev%252Bunsubscribe@googlegroups.com>>.
> >>> For more options, visit this group at http://groups.google.com/**
> >>> group/openni-dev?hl=en <http://groups.google.com/group/openni-dev?hl=en
> <http://groups.google.com/group/openni-dev?hl=en>>
> >>> .
> >>>
> >>>
> >>> --
> >> You received
> this message because you are subscribed to the Google Groups
> >> "OpenNI" group.
> >> To view this discussion on the web
> visit
> >> https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ
> <https://groups.google.com/d/msg/openni-dev/-/MTIDx_x4LBIJ>.
> >>
> >> To post to this group, send email to openni-
> d...@googlegroups.com <mailto:d...@googlegroups.com>.
> >> To unsubscribe from this group, send email to
> >> openni-dev+unsubscribe@googlegroups.com <mailto:openni-dev%2Bunsu...@googlegroups.com>.
> >>
> For more options, visit this group at
> >> http://groups.google.com/group/openni-dev?hl=en <http://groups.google.com/group/openni-dev?hl=en>.
> >>
> >
> >
>
> --
> You received this message because you are subscribed
> to the Google Groups "OpenNI" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J
> <https://groups.google.com/d/msg/openni-dev/-/gkVgSaMEND0J>.
> To post to this
> group, send email to openn...@googlegroups.com <mailto:openni-dev@googlegroups.com>.
> To unsubscribe from this group, send email to openni-
> dev+unsubscribe@googlegroups.com <mailto:dev%2Bunsubscribe@googlegroups.com>.
> For more options, visit this group at http://groups.google.com/group/openni-dev?hl=en
> <http://groups.google.com/group/openni-dev?hl=en>.
>
>
> --
> You received this message because you are subscribed to the Google Groups "OpenNI" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/openni-dev/-/TS8BPJQhid8J.
> To post to this group, send email to openn...@googlegroups.com.
> To unsubscribe from this group, send email to openni-dev+unsubscribe@googlegroups.com.