> --
> You received this message because you are subscribed to the Google Groups "NUnit-Discuss" group.
> To post to this group, send email to nunit-...@googlegroups.com.
> To unsubscribe from this group, send email to nunit-discus...@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/nunit-discuss?hl=en.
>
>
Charlie
Most likely, your addin was being loaded twice.
In order to make it easier to test addins, NUnit searches each test assembly
for addins to be loaded, in addition to searching the addins
directory. Normally,
when you are confident that your addin works, you should remove it from the
test assembly and install it in the addins folder. This makes it available to
all tests that are run using NUnit.
OTOH, if you really only want the addin to apply for a certain project, then
you can leave it in the test assembly and not install it as a permanent addin.
Charlie
> To unsubscribe from this group, send email to nunit-discuss+unsubscribe@googlegroups.com.
>> > To unsubscribe from this group, send email to nunit-discuss+unsubscribe@googlegroups.com.
>> > For more options, visit this group at http://groups.google.com/group/nunit-discuss?hl=en.
>> >
>> >
>
> --
> You received this message because you are subscribed to the Google Groups "NUnit-Discuss" group.
> To view this discussion on the web visit https://groups.google.com/d/msg/nunit-discuss/-/a730uESbNJUJ.
> To post to this group, send email to nunit-...@googlegroups.com.
> To unsubscribe from this group, send email to nunit-discuss+unsubscribe@googlegroups.com.