Skip to first unread message
Yozz
Nov 5, 2016, 5:43:27 AM11/5/16
to MIDI2LR
Yozz
Nov 8, 2016, 1:47:30 AM11/8/16
to MIDI2LR
Its my key map and label/sticker for XT Mini...
c. - means crop function...
When You click CROP button, the map is change for other profile for cropping and then clicking knobs You can use a few Upright modes or reset it.
First 4 knobs from left in this mode is to cropping and last is for rotating photo.
After click to Hue / Lum / Sat button, knobs change to tweak colors
In Layer B 4,5,6 and 7 knobs is for change Split tone values.
In Layer B 8 knob is for change Vig amount only.
BW is little tricky to use... There is convert to BW, BW for change the map profile and in some case for on/off bw mix.
salem
Nov 19, 2016, 6:13:50 AM11/19/16
to MIDI2LR
Thanks, I''l try it, because I was looking for something like the pfixer one. :)
salem
Nov 19, 2016, 6:16:27 AM11/19/16
to MIDI2LR
Would it be possible to ask you your Xml mapping in order to test it, please ?
Brian Lovelace
Nov 25, 2016, 1:49:12 AM11/25/16
to MIDI2LR
Hey there.
I was trying to do the same thing as you! Here is how I programmed everything out! I spent HOURS on mapping and recreating the sticker for my controllers this week, so I hope this helps you out!
If you figure out how to get the lights to 'SOLO' themselves when switching between Normal Mode/Hue/Sat/Lum modes, PLEASE let me know!
So, obviously the .bin files are to load onto your controller using the x-touch editor, then the .xml files are for importing into your MIDI2LR preset folder.
Let me know how it all goes!
-- Brian Lovelace
Rory Jaffe
Nov 25, 2016, 2:08:17 PM11/25/16
to MIDI2LR
Brian--could I add your work to the MIDI2LR distribution? It'll have your name on the folder.
Rory Jaffe
Nov 25, 2016, 2:10:08 PM11/25/16
to mid...@googlegroups.com
Yozz--Can I put your overlay into the MIDI2LR distribution? It'll have your name on the directory. Thanks
Yozz
Nov 25, 2016, 5:15:17 PM11/25/16
to MIDI2LR
Yes ;)
Benjamin
Nov 26, 2016, 6:10:58 AM11/26/16
to MIDI2LR
Hi, is there an OS X version for x-touch editor?
Brian Lovelace
Nov 26, 2016, 12:53:12 PM11/26/16
to MIDI2LR
Unfortunately, there is not.
David MacVicar
Dec 1, 2016, 10:25:12 PM12/1/16
to MIDI2LR
Wow this is great. Any recommendation on where/how to actually get this printed?
Joel Conner
Dec 2, 2016, 3:24:22 PM12/2/16
to MIDI2LR
Dude...this is amazing that you shared this. Huge props. It always helps me to have a starting point on something like this and then to be able to tweak it. Thanks a million
Brian Lovelace
Dec 2, 2016, 7:21:58 PM12/2/16
to MIDI2LR
No worries!
Brian Lovelace
Dec 2, 2016, 7:27:29 PM12/2/16
to MIDI2LR
No worries! I just bought sticker paper and an exacto knive and cut it out myself.
Yozz
Dec 3, 2016, 2:28:00 AM12/3/16
to MIDI2LR
Same as You ;)
Erwann HERPE
Dec 9, 2016, 7:31:54 AM12/9/16
to MIDI2LR
Hello Everyone.
Many thanks Brian for your work, it saved me a lot of time !!
In addition, can you post a printscreen of your mapping for keys in LR, because for some of them i don't understand witch function is expected :-/
Many thanks again :-)
Erwann
Many thanks Brian for your work, it saved me a lot of time !!
In addition, can you post a printscreen of your mapping for keys in LR, because for some of them i don't understand witch function is expected :-/
Many thanks again :-)
Erwann
Maciej Markiewicz
Dec 9, 2016, 2:01:39 PM12/9/16
to MIDI2LR
Brian thank you for your layouts. I was just doing my own but the template saved me a huuuge amount of time. I have also a stupid question as I do not understand that.What for are the .bin files for? and how do you charge them or modify them ...
Brian Lovelace
Dec 9, 2016, 9:10:30 PM12/9/16
to MIDI2LR
Hey guys! No worries! I've made a YouTube video showing exactly what to do and how to set it up! Check it out! :)
Brian Lovelace
Dec 9, 2016, 9:22:08 PM12/9/16
to MIDI2LR
Here's a link to a folder with every piece of information you might need to get your controller set up the same as mine.
Mark Segal
Dec 26, 2016, 1:18:15 PM12/26/16
to MIDI2LR
Hey,
I've downloaded and did everything as shown in your video, but apparently there is still some mistake in layer B bin for x-touch mini: the bottom row buttons are set to toggle whereas it should be the top row buttons (Basic/Hue/Sat/Lum) that toggle. other than that - works like a charm! Thank you!!!)))
Mark Segal
Dec 26, 2016, 1:29:31 PM12/26/16
to MIDI2LR
I'd program in sturation or luminance mode the encoders push to apply a preset instead of repeating same as other layer functions
On Saturday, December 10, 2016 at 4:22:08 AM UTC+2, Brian Lovelace wrote:
Erwann HERPE
Dec 27, 2016, 8:20:36 AM12/27/16
to MIDI2LR
Hi,
many thanks again for your work, now i can perfectly use my x-touch !
Erwann
many thanks again for your work, now i can perfectly use my x-touch !
Erwann
Reply all
Reply to author
Forward
0 new messages