Bridge Library not starting

67 views
Skip to first unread message

Charles Blakely

unread,
Oct 5, 2017, 5:26:49 PM10/5/17
to Linino
I originally asked this over on the Arduino.cc site, but got 0 attempts at solving the issue.  I think it has to due with it being a Tian.

I purchased the Tian from Sparkfun and just did all the updates.  I am currently using 3.18.11 and Arduino IDE 1.8.4.  I am to get the Ciao examples working, but I was hoping to use the Bridge library.  However, I am unable to get any of the examples working.  After pushing the sketch, I never the process start (ps | grep bridge) and I am sure it is hanging at Bridge.begin().  I found one thread that pertains the Yun about a mismatch between the kernel speed and the constant in the Bridge library.  That is the case for the Tian as well, but the proposed solution still does not fix my issue (I replaced Bridge.begin() with Bridge.begin(115200)).  I am really wracking my brain here, and I desperately need to get this working.  Any help would be greatly appreciated.
Reply all
Reply to author
Forward
0 new messages