New LininoOS release ver 1.2 available

[Linino]

A new release of LininoOS is available on the linino download site. 

Starting form this release it is possible to start and stop the LininoIO functionality. For more details have a look at the wiki page.

Compared to the release 1.1 this release contains:

LininoIO (Maintaining)

- gcc 4.6.3 is now available !

- node.js: libcrypto patch for node.js. New node.js modules : node-muzzley-client and node-ideino-linino-lib

- DISPLAY_SUPPORT is now enabled 

- new software : wget v1.16.1, ntp v4.2.8, ca-certificates 20141019, duktape v1.2.0,  cpu-mcu-bridge v1.5.2,

directfb, imagemagick,fbtest, oled-utils, openobex, obexftp, obexfs

- linino: added some linino script files

LininoIO (Kernel side)

- fix issue on MAC address for lan and wan interfaces

- new patches for the kernel and corresponding firmware to fix PWM issues

- Use serial terminal at 250k baud with avr bootloader to use Arduino IDE

- linux CONFIG_SPI_TTY_PLAIN=m: compile spi-tty-plain driver as a module.

  This is needed in order to permit run-avrdude rmmod spi-tty-plain driver.

- run-avrdude: fix rmmod with the right module name 

Web Panel

- critical fix to linino web panel

[Andrea Rocco Lotronto]

This version doesn't works fine.

After installation of the new release using the command: 

"sysupgrade -v -n"

I have tried to use the command:

"run-avrdude /etc/linino/bathos-yun.hex"

to load the bathos sketch but I have received the follow error:

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x6d02
         0xff != 0x00
avrdude: verification error; content mismatch


avrdude: safemode: Fuses OK (E:FB, H:D8, L:FF)


avrdude done.  Thank you.

I have tried to reboot the board but the correct gpio link 

"/sys/class/gpio/pgiochip100" 

is not present.

[Andrea Cannistrà]

the warning you got does not affect the flashing of the mcu itself.
The firmware will properly work after rebooting the board.

--
Andrea

--
You received this message because you are subscribed to the Google Groups "Linino" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linino+un...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

---

Questa e-mail è stata controllata per individuare virus con Avast antivirus. www.avast.com