The same metrics but as User Data to be shown as curves on "Ride" chart, since speed and cadence is the same for all samples in the same "length" the chart will have a stair for each length:
And finally sTSS as defined here, intended to be used as Summary and/or Stress metric:
Feel free to try them and comment, and/or share your own metrics, perhaps we can agree on a set to be included in the next release.
Cheers, Ale.
@Ale - Just tried to fix the gaps with up to 150s. Looking at the chart, I see that there are about 50s gaps, and nothing changed. I have attached a copy of a file, if you want to give it a go. Dunno If I'm doing something wrong here.
Update: some charts using these metrics are available for download from the cloud using the new V4.0 1606 Development Builds
A cool way to look at it.. had not thought of it like this before. Is each dot an interval?
The one issue (that is a bigger one to solve for swim analysis in GC) is drills and 'pool toys' (flippers, paddles, forearm fulcrums, pullbuouys).. they throw this very far off, and there is no way to mark them as different. I have taken to naming them consistently in the laps, in the hopes that one day we will find a solution and I can easily identify them (somehow).
The one issue (that is a bigger one to solve for swim analysis in GC) is drills and 'pool toys' (flippers, paddles, forearm fulcrums, pullbuouys).. they throw this very far off, and there is no way to mark them as different. I have taken to naming them consistently in the laps, in the hopes that one day we will find a solution and I can easily identify them (somehow).Drills don't affect this chart since Cadence=0 for them and they are filtered, PB/paddles/fins or other strokes are a problem. It would be nice to plot the selected interval(s) but, for the moment, this is not available from R, AFAIK.
TYPE: 0-pause, 1-free, 2-back, 3-breast, 4-fly, 5-drill, 6-mixed, 7-IMDURATION: seconds per lengthSTROKES: total strokes per length
The most common swimming metrics are now builtin, they will be available in the next development build:Strokes Per Length: counting only the arm with the watch, pool length from metadata defaults to 50mSWolf: Strokes Per Length plus time in seconds, pool length from metadata defaults to 50mStroke Rate: counting both arms for crawl/back corrected by 3m push-off when Pool Length is defined, otherwise it is just 2*CadenceSwim Pace: average swim pace in min/100m or min/100yd when Cadence>0, to avoid kick/drill setsAdditionally the extensible data model (XData) that Mark allows to have length-by-length information for newly imported FIT pool swimming files, one record per length with 3 fields:TYPE: 0-pause, 1-free, 2-back, 3-breast, 4-fly, 5-drill, 6-mixed, 7-IMDURATION: seconds per lengthSTROKES: total strokes per lengthThis information can be seen in the SWIM tab on Editor chart and charted as User Data or accessed in User Metrics.
When length-by-length information is available as XData we now compute 4 new metrics:
- Swim Pace Free
- Swim Pace Back
- Swim Pace Breast
- Swim Pace Fly
Hey AleWhen length-by-length information is available as XData we now compute 4 new metrics:
- Swim Pace Free
- Swim Pace Back
- Swim Pace Breast
- Swim Pace Fly
A few Q's for you..
- Would we be able to now use to separate lanes in your 'Swim' Chart? I'm picturing something like 4 swimlanes - 1 for each stroke, and data (speed/SWOLF/SPL) will only show if I used that stroke? Something like: '(isSwim=1 && SPEED>0 &&XData=Free)..? Or do you think it would be easier if it was just included in the main pace lane in the hover-over box, or by colour coding the segments? (that way it could be applied across all)
- Could we show this in the interval / summary tab, only for swims? (or is that what you were saying is only coming in the next dev build?)
You can configure them at Summary/Interval (only shown for swims) and use them in Metrics Trends charts.
# Length seconds plus stroke cycles\