New Machine: http://www.newegg.com/Product/Product.aspx?Item=N82E16859324001&Tpk=bis-6620
Problem: "failed to mount CF card, system dead..."
I have added the rootwait=10 to the APPEND line in the syslinux.cfg
file and it worked. It forced the system to wait before boot. After
the 10 second wait I get this:
mount: /dev/hda1 is not a valid block device
mount: /dev/hdb1 is not a valid block device
mount: /dev/hdc1 is not a valid block device
mount: /dev/hdd1 is not a valid block device
mount: /dev/sda1 is not a valid block device
mount: /dev/sdb1 is not a valid block device
mount: /dev/sdc1 is not a valid block device
mount: /dev/sdd1 is not a valid block device
mount: /dev/hda is not a valid block device
failed to mount CF card, system dead...
We really like this unit because it front loads a CF card allowing to
easily swap out the OS medium should it become damaged without having
to take a unit down and then take it apart. Any ideas?
Thanks!
--
You received this message because you are subscribed to the Google Groups "Concerto Digital Signage" group.
To post to this group, send email to concerto-dig...@googlegroups.com.
To unsubscribe from this group, send email to concerto-digital-s...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/concerto-digital-signage?hl=en.
The USB drives do boot. I loaded a live cd (usb) of Ubuntu earlier and
the CF card wouldn't even show up. Do you want me to try a live cd
version of Concerto instead?
Thanks!
Richie Rich
On Mar 16, 11:43 am, Andrew Armenia <and...@asquaredlabs.com> wrote:
> If you can get the USB drive to boot, try dropping to a shell with a CF card
> loaded. Then run "dmesg" and send me the output. If not, try booting a Linux
> live CD (e.g. from a USB CD drive) while a CF card is inserted. Then run
> "sudo dmesg" and "sudo lsusb" and send the output. Thanks.
>
> -Andrew
>
> On Tue, Mar 16, 2010 at 1:38 PM, Andrew Armenia <and...@asquaredlabs.com>wrote:
>
> > Please try doing a Concerto flash drive install using the procedure at
> >http://www.concerto-signage.com/help_pages/33. I also suspect that the CF
> > reader on this machine is really a USB device, so you may need to follow the
> > procedure on that page to set the "rootwait" parameter. We have received a
> > number of reports of USB issues with the current Concerto Player build, so I
> > will be taking a look at this in the near future.
>
> > -Andrew
>
> > On Tue, Mar 16, 2010 at 12:58 PM, Richie Rich <richardduv...@gmail.com>wrote:
>
> >> I am working on deploying Concerto on a new machine and am having some
> >> trouble. Our other units handle Concerto beautifully with almost no
> >> config time required.
>
> >> New Machine:
> >>http://www.newegg.com/Product/Product.aspx?Item=N82E16859324001&Tpk=b...
> >> Problem: "failed to mount CF card, system dead..."
>
> >> I have added the rootwait=10 to the APPEND line in the syslinux.cfg
> >> file and it worked. It forced the system to wait before boot. After
> >> the 10 second wait I get this:
>
> >> mount: /dev/hda1 is not a valid block device
> >> mount: /dev/hdb1 is not a valid block device
> >> mount: /dev/hdc1 is not a valid block device
> >> mount: /dev/hdd1 is not a valid block device
> >> mount: /dev/sda1 is not a valid block device
> >> mount: /dev/sdb1 is not a valid block device
> >> mount: /dev/sdc1 is not a valid block device
> >> mount: /dev/sdd1 is not a valid block device
> >> mount: /dev/hda is not a valid block device
> >> failed to mount CF card, system dead...
>
> >> We really like this unit because it front loads a CF card allowing to
> >> easily swap out the OS medium should it become damaged without having
> >> to take a unit down and then take it apart. Any ideas?
>
> >> Thanks!
>
> >> --
> >> You received this message because you are subscribed to the Google Groups
> >> "Concerto Digital Signage" group.
> >> To post to this group, send email to
> >> concerto-dig...@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> concerto-digital-s...@googlegroups.com<concerto-digital-signage%2Bunsu...@googlegroups.com>
(I did this from a Ubuntu Live CD/USB drive)
sudo dmesg:
[ 0.000000] HighMem 0x000373fe -> 0x0007f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f680
[ 0.000000] On node 0 totalpages: 521743
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80,
node_mem_map
c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2310 pages used for memmap
[ 0.000000] HighMem zone: 293244 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000,
GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7f800000:7f600000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total
pages: 517665
[ 0.000000] Kernel command line: initrd=/ubninit
file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
BOOT_IMAGE=/ubnkern
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 1097.262 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7,
524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] allocated 10436800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't
want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2043432k/2087424k available (4126k kernel code,
42716k
reserved, 2208k data, 532k init, 1182216k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3,
MinObjects=0,
CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-
cpu
timer
[ 0.004000] Calibrating delay loop (skipped), value calculated
using timer
frequency.. 2194.52 BogoMIPS (lpj=4389048)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017162] SMP alternatives: switching to UP code
[ 0.344056] ACPI: Core revision 20080926
[ 0.351516] ACPI: Checking initramfs for custom DSDT
[ 1.080724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.121524] CPU0: Intel(R) Atom(TM) CPU Z510 @ 1.10GHz stepping
02
[ 1.124003] Brought up 1 CPUs
[ 1.124003] Total of 1 processors activated (2194.52 BogoMIPS).
[ 1.124003] CPU0 attaching NULL sched-domain.
[ 1.124003] net_namespace: 776 bytes
[ 1.124003] Booting paravirtualized kernel on bare hardware
[ 1.124003] Time: 3:34:03 Date: 03/17/10
[ 1.124003] regulator: core version 0.5
[ 1.124003] NET: Registered protocol family 16
[ 1.124003] EISA bus registered
[ 1.124003] ACPI: bus type pci registered
[ 1.124003] PCI: MCFG configuration 0: base e0000000 segment 0
buses 0 -
255
[ 1.124003] PCI: Not using MMCONFIG.
[ 1.124003] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last
bus=2
[ 1.124003] PCI: Using configuration type 1 for base access
[ 1.128126] ACPI: EC: Look up EC in DSDT
[ 1.139711] ACPI: Interpreter enabled
[ 1.139726] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.139790] ACPI: Using IOAPIC for interrupt routing
[ 1.139949] PCI: MCFG configuration 0: base e0000000 segment 0
buses 0 -
255
[ 1.146577] PCI: MCFG area at e0000000 reserved in ACPI
motherboard
resources
[ 1.146586] PCI: Using MMCONFIG for extended config space
[ 1.159955] ACPI: No dock devices found.
[ 1.160157] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.160370] pci 0000:00:02.0: reg 10 32bit mmio:
[0xfe980000-0xfe9fffff]
[ 1.160386] pci 0000:00:02.0: reg 14 io port: [0xc880-0xc887]
[ 1.160400] pci 0000:00:02.0: reg 18 32bit mmio:
[0xd0000000-0xdfffffff]
[ 1.160414] pci 0000:00:02.0: reg 1c 32bit mmio:
[0xfe940000-0xfe97ffff]
[ 1.160544] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xfe938000-0xfe93bfff]
[ 1.160594] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 1.160603] pci 0000:00:1b.0: PME# disabled
[ 1.160672] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.160682] pci 0000:00:1c.0: PME# disabled
[ 1.160753] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.160763] pci 0000:00:1c.1: PME# disabled
[ 1.160832] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]
[ 1.160902] pci 0000:00:1d.1: reg 20 io port: [0xc080-0xc09f]
[ 1.160971] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f]
[ 1.161066] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xfe937c00-0xfe937fff]
[ 1.161141] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.161152] pci 0000:00:1d.7: PME# disabled
[ 1.161193] pci 0000:00:1e.0: reg 10 32bit mmio:
[0xfe937800-0xfe9378ff]
[ 1.161275] pci 0000:00:1e.1: reg 10 32bit mmio:
[0xfe937400-0xfe9374ff]
[ 1.161348] pci 0000:00:1e.2: reg 10 32bit mmio:
[0xfe937000-0xfe9370ff]
[ 1.161514] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 1.161617] pci 0000:01:00.0: reg 10 io port: [0xdd00-0xddff]
[ 1.161650] pci 0000:01:00.0: reg 18 64bit mmio:
[0xfeaff000-0xfeafffff]
[ 1.161675] pci 0000:01:00.0: reg 20 64bit mmio:
[0xcfff0000-0xcfffffff]
[ 1.161692] pci 0000:01:00.0: reg 30 32bit mmio:
[0xfeac0000-0xfeadffff]
[ 1.161713] pci 0000:01:00.0: supports D1 D2
[ 1.161720] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 1.161730] pci 0000:01:00.0: PME# disabled
[ 1.161818] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 1.161828] pci 0000:00:1c.0: bridge 32bit mmio:
[0xfea00000-0xfeafffff]
[ 1.161840] pci 0000:00:1c.0: bridge 32bit mmio pref: [0xcff00000-
0xcfffffff]
[ 1.161931] pci 0000:02:00.0: reg 10 64bit mmio:
[0xfebffc00-0xfebffc7f]
[ 1.161958] pci 0000:02:00.0: reg 18 64bit mmio:
[0xfebf8000-0xfebfbfff]
[ 1.161975] pci 0000:02:00.0: reg 20 io port: [0xe880-0xe8ff]
[ 1.162002] pci 0000:02:00.0: reg 30 32bit mmio:
[0xfeb00000-0xfeb7ffff]
[ 1.162025] pci 0000:02:00.0: supports D1 D2
[ 1.162105] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 1.162116] pci 0000:00:1c.1: bridge 32bit mmio:
[0xfeb00000-0xfebfffff]
[ 1.162141] bus 00 -> node 0
[ 1.162160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.162717] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.POP4._PRT]
[ 1.163031] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.POP5._PRT]
[ 1.182213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11
12 14
15)
[ 1.182598] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11
12 14
15)
[ 1.182977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11
12 14
15)
[ 1.183355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11
12 14
*15)
[ 1.183733] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.184132] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.184514] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.184904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.185278] ACPI Warning (tbutils-0217): Incorrect checksum in
table
[OEMB] - 07, should be 58 [20080926]
[ 1.186551] ACPI: WMI: Mapper loaded
[ 1.187074] SCSI subsystem initialized
[ 1.187198] libata version 3.00 loaded.
[ 1.187342] usbcore: registered new interface driver usbfs
[ 1.187395] usbcore: registered new interface driver hub
[ 1.187488] usbcore: registered new device driver usb
[ 1.187831] PCI: Using ACPI for IRQ routing
[ 1.188067] Bluetooth: Core ver 2.13
[ 1.188154] NET: Registered protocol family 31
[ 1.188160] Bluetooth: HCI device and connection manager
initialized
[ 1.188169] Bluetooth: HCI socket layer initialized
[ 1.188176] NET: Registered protocol family 8
[ 1.188181] NET: Registered protocol family 20
[ 1.188215] NetLabel: Initializing
[ 1.188221] NetLabel: domain hash size = 128
[ 1.188225] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.188262] NetLabel: unlabeled traffic allowed by default
[ 1.188296] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.188311] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.192184] AppArmor: AppArmor Filesystem Enabled
[ 1.192207] pnp: PnP ACPI init
[ 1.192207] ACPI: bus type pnp registered
[ 1.196030] Switched to high resolution mode on CPU 0
[ 1.198870] pnp: PnP ACPI: found 13 devices
[ 1.198878] ACPI: ACPI bus type pnp unregistered
[ 1.198888] PnPBIOS: Disabled by ACPI PNP
[ 1.198917] system 00:01: iomem range 0x7f800000-0x7fffffff has
been
reserved
[ 1.198938] system 00:05: ioport range 0xa00-0xa0f has been
reserved
[ 1.198947] system 00:05: ioport range 0xa10-0xa1f has been
reserved
[ 1.198965] system 00:06: ioport range 0x4d0-0x4d1 has been
reserved
[ 1.198974] system 00:06: ioport range 0x900-0x9f3 has been
reserved
[ 1.198982] system 00:06: ioport range 0x400-0x43f has been
reserved
[ 1.198990] system 00:06: ioport range 0x480-0x4bf has been
reserved
[ 1.199000] system 00:06: iomem range 0xf0000000-0xf0003fff has
been
reserved
[ 1.199026] system 00:0a: iomem range 0xfec00000-0xfec00fff has
been
reserved
[ 1.199035] system 00:0a: iomem range 0xfee00000-0xfee00fff has
been
reserved
[ 1.199052] system 00:0b: iomem range 0xe0000000-0xefffffff has
been
reserved
[ 1.199069] system 00:0c: iomem range 0x0-0x9ffff could not be
reserved
[ 1.199078] system 00:0c: iomem range 0xc0000-0xcffff could not be
reserved
[ 1.199087] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
[ 1.199096] system 00:0c: iomem range 0x100000-0x7f7fffff could not
be
reserved
[ 1.234163] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 1.234174] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 1.234187] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
[ 1.234198] pci 0000:00:1c.0: PREFETCH window: 0x000000cff00000-
0x000000cfffffff
[ 1.234212] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 1.234221] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 1.234232] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 1.234241] pci 0000:00:1c.1: PREFETCH window: disabled
[ 1.234279] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1.234291] pci 0000:00:1c.0: setting latency timer to 64
[ 1.234310] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 1.234320] pci 0000:00:1c.1: setting latency timer to 64
[ 1.234331] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.234338] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.234345] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.234352] bus: 01 index 1 mmio: [0xfea00000-0xfeafffff]
[ 1.234359] bus: 01 index 2 mmio: [0xcff00000-0xcfffffff]
[ 1.234366] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.234372] bus: 02 index 0 io port: [0xe000-0xefff]
[ 1.234379] bus: 02 index 1 mmio: [0xfeb00000-0xfebfffff]
[ 1.234386] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.234392] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.234420] NET: Registered protocol family 2
[ 1.234792] IP route cache hash table entries: 32768 (order: 5,
131072
bytes)
[ 1.235562] TCP established hash table entries: 131072 (order: 8,
1048576
bytes)
[ 1.236936] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 1.237694] TCP: Hash tables configured (established 131072 bind
65536)
[ 1.237704] TCP reno registered
[ 1.238091] NET: Registered protocol family 1
[ 1.238429] checking if image is initramfs... it is
[ 2.695020] Freeing initrd memory: 7566k freed
[ 2.695335] cpufreq: No nForce2 chipset.
[ 2.695698] audit: initializing netlink socket (disabled)
[ 2.695744] type=2000 audit(1268796844.692:1): initialized
[ 2.716535] highmem bounce pool size: 64 pages
[ 2.716551] HugeTLB registered 4 MB page size, pre-allocated 0
pages
[ 2.720490] VFS: Disk quotas dquot_6.5.1
[ 2.720679] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 2.722555] fuse init (API version 7.10)
[ 2.722806] msgmni has been set to 1698
[ 2.723315] alg: No test for stdrng (krng)
[ 2.723356] io scheduler noop registered
[ 2.723363] io scheduler anticipatory registered
[ 2.723369] io scheduler deadline registered
[ 2.723427] io scheduler cfq registered (default)
[ 2.723467] pci 0000:00:02.0: Boot video device
[ 2.727115] pcieport-driver 0000:00:1c.0: setting latency timer to
64
[ 2.727177] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.727225] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.727330] pcieport-driver 0000:00:1c.1: setting latency timer to
64
[ 2.727393] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.727433] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.727573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.728464] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 2.728829] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 2.728839] ACPI: Sleep Button (CM) [SLPB]
[ 2.728977] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.728986] ACPI: Power Button (CM) [PWRB]
[ 2.729121] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.729249] ACPI: Lid Switch [LID]
[ 2.730705] ACPI: SSDT 7F6A0270, 01FA (r1 PmRef Cpu0Ist 3000
INTL
20051117)
[ 2.731827] processor ACPI_CPU:00: registered as cooling_device0
[ 2.736540] isapnp: Scanning for PnP cards...
[ 3.091664] isapnp: No Plug & Play device found
[ 3.095637] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.095813] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.095988] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.098624] brd: module loaded
[ 3.099595] loop: module loaded
[ 3.099833] Fixed MDIO Bus: probed
[ 3.099850] PPP generic driver version 2.4.2
[ 3.100073] input: Macintosh mouse button emulation as
/devices/virtual/input/input3
[ 3.100165] Driver 'sd' needs updating - please use bus_type
methods
[ 3.100193] Driver 'sr' needs updating - please use bus_type
methods
[ 3.100538] sata_sil24 0000:02:00.0: version 1.1
[ 3.100572] sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level,
low) ->
IRQ 17
[ 3.100726] sata_sil24 0000:02:00.0: setting latency timer to 64
[ 3.101258] scsi0 : sata_sil24
[ 3.101554] scsi1 : sata_sil24
[ 3.101676] ata1: SATA max UDMA/100 host m128@0xfebffc00 port
0xfebf8000
irq 17
[ 3.101687] ata2: SATA max UDMA/100 host m128@0xfebffc00 port
0xfebfa000
irq 17
[ 5.180046] ata1: SATA link down (SStatus 0 SControl 0)
[ 7.260040] ata2: SATA link down (SStatus 0 SControl 0)
[ 7.261605] pata_sch 0000:00:1f.1: version 0.2
[ 7.261695] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 7.261863] scsi2 : pata_sch
[ 7.262038] scsi3 : pata_sch
[ 7.263058] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma
0xffa0 irq
14
[ 7.263068] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma
0xffa8 irq
15
[ 7.432409] ata3.00: ATA-0: CF 1GB, 20051220, max MWDMA2
[ 7.432418] ata3.00: 2030112 sectors, multi 0: LBA
[ 7.440407] ata3.00: configured for MWDMA2
[ 7.456405] ata3.00: configured for MWDMA2
[ 7.456414] ata3: EH complete
[ 7.623206] scsi 2:0:0:0: Direct-Access ATA CF
1GB 2005
PQ: 0 ANSI: 5
[ 7.623508] sd 2:0:0:0: [sda] 2030112 512-byte hardware sectors:
(1.03
GB/991 MiB)
[ 7.623570] sd 2:0:0:0: [sda] Write Protect is off
[ 7.623578] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.623678] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled,
doesn't support DPO or FUA
[ 7.623882] sd 2:0:0:0: [sda] 2030112 512-byte hardware sectors:
(1.03
GB/991 MiB)
[ 7.623940] sd 2:0:0:0: [sda] Write Protect is off
[ 7.623948] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.624067] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled,
doesn't support DPO or FUA
[ 7.624080] sda: sda1
[ 7.624978] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.625126] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.625483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 7.625556] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low)
-> IRQ
19
[ 7.625605] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.625615] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.625780] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus
number 1
[ 7.629746] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.629761] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 7.629805] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe937c00
[ 7.644031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.644241] usb usb1: configuration #1 chosen from 1 choice
[ 7.644324] hub 1-0:1.0: USB hub found
[ 7.644347] hub 1-0:1.0: 8 ports detected
[ 7.644676] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.644737] uhci_hcd: USB Universal Host Controller Interface
driver
[ 7.644832] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low)
-> IRQ
16
[ 7.644848] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.644856] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.644984] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus
number 2
[ 7.645043] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
[ 7.645266] usb usb2: configuration #1 chosen from 1 choice
[ 7.645346] hub 2-0:1.0: USB hub found
[ 7.645368] hub 2-0:1.0: 2 ports detected
[ 7.645597] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low)
-> IRQ
17
[ 7.645612] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.645621] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.645751] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus
number 3
[ 7.645791] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080
[ 7.646008] usb usb3: configuration #1 chosen from 1 choice
[ 7.646088] hub 3-0:1.0: USB hub found
[ 7.646108] hub 3-0:1.0: 2 ports detected
[ 7.646376] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ
18
[ 7.646392] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.646400] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.646526] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus
number 4
[ 7.646581] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 7.646797] usb usb4: configuration #1 chosen from 1 choice
[ 7.646875] hub 4-0:1.0: USB hub found
[ 7.646894] hub 4-0:1.0: 2 ports detected
[ 7.647245] usbcore: registered new interface driver libusual
[ 7.647349] usbcore: registered new interface driver usbserial
[ 7.647380] USB Serial support registered for generic
[ 7.647424] usbcore: registered new interface driver
usbserial_generic
[ 7.647430] usbserial: USB Serial Driver core
[ 7.647572] PNP: No PS/2 controller found. Probing ports directly.
[ 7.650246] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.650263] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.650606] mice: PS/2 mouse device common for all mice
[ 7.651072] rtc_cmos 00:02: RTC can wake from S4
[ 7.651173] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 7.651217] rtc0: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 7.651426] device-mapper: uevent: version 1.0.3
[ 7.651728] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised:
dm-d...@redhat.com
[ 7.651870] device-mapper: multipath: version 1.0.5 loaded
[ 7.651878] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 7.652148] EISA: Probing bus 0 at eisa.0
[ 7.652220] EISA: Detected 0 cards.
[ 7.652297] cpuidle: using governor ladder
[ 7.652304] cpuidle: using governor menu
[ 7.653874] TCP cubic registered
[ 7.654198] NET: Registered protocol family 10
[ 7.655449] lo: Disabled Privacy Extensions
[ 7.656474] NET: Registered protocol family 17
[ 7.656535] Bluetooth: L2CAP ver 2.11
[ 7.656541] Bluetooth: L2CAP socket layer initialized
[ 7.656549] Bluetooth: SCO (Voice Link) ver 0.6
[ 7.656554] Bluetooth: SCO socket layer initialized
[ 7.656648] Bluetooth: RFCOMM socket layer initialized
[ 7.656668] Bluetooth: RFCOMM TTY layer initialized
[ 7.656674] Bluetooth: RFCOMM ver 1.10
[ 7.657735] Using IPI No-Shortcut mode
[ 7.658005] registered taskstats version 1
[ 7.658296] Magic number: 2:602:563
[ 7.658325] platform Fixed MDIO bus.0: hash matches
[ 7.658429] rtc_cmos 00:02: setting system clock to 2010-03-17
03:34:10
UTC (1268796850)
[ 7.658439] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.658444] EDD information not available.
[ 7.659001] Freeing unused kernel memory: 532k freed
[ 7.659366] Write protecting the kernel text: 4128k
[ 7.659493] Write protecting the kernel read-only data: 1532k
[ 8.068042] usb 1-6: new high speed USB device using ehci_hcd and
address
4
[ 8.203694] usb 1-6: configuration #1 chosen from 1 choice
[ 8.247655] Initializing USB Mass Storage driver...
[ 8.273664] scsi4 : SCSI emulation for USB Mass Storage devices
[ 8.273961] usbcore: registered new interface driver usb-storage
[ 8.273973] USB Mass Storage support registered.
[ 8.274206] usb-storage: device found at 4
[ 8.274212] usb-storage: waiting for device to settle before
scanning
[ 8.460047] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[ 8.615331] usb 2-1: configuration #1 chosen from 1 choice
[ 8.856071] usb 2-2: new low speed USB device using uhci_hcd and
address 3
[ 8.890751] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.890788] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 8.890821] r8169 0000:01:00.0: setting latency timer to 64
[ 8.891026] r8169 0000:01:00.0: irq 2303 for MSI/MSI-X
[ 8.892901] eth0: RTL8168c/8111c at 0xf7d92000, 00:50:c2:1f:33:a9,
XID
3c4000c0 IRQ 2303
[ 9.030314] usb 2-2: configuration #1 chosen from 1 choice
[ 11.076098] usbcore: registered new interface driver hiddev
[ 11.089800] input: HID 413c:3010 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 11.120262] generic-usb 0003:413C:3010.0001: input,hidraw0: USB HID
v1.00
Mouse [HID 413c:3010] on usb-0000:00:1d.0-1/input0
[ 11.120403] usbcore: registered new interface driver usbhid
[ 11.120414] usbhid: v2.6:USB HID core driver
[ 11.272533] input: DELL DELL USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[ 11.288681] dell 0003:413C:2005.0002: input,hidraw1: USB HID v1.10
Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-2/input0
[ 13.272274] usb-storage: device scan complete
[ 13.273148] scsi 4:0:0:0: Direct-Access Kingston DataTraveler
2.0 1.00
PQ: 0 ANSI: 2
[ 13.276360] sd 4:0:0:0: [sdb] 1952768 512-byte hardware sectors:
(999
MB/953 MiB)
[ 13.277826] sd 4:0:0:0: [sdb] Write Protect is off
[ 13.277837] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.277844] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.281006] sd 4:0:0:0: [sdb] 1952768 512-byte hardware sectors:
(999
MB/953 MiB)
[ 13.282511] sd 4:0:0:0: [sdb] Write Protect is off
[ 13.282523] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.282530] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.282547] sdb: sdb1
[ 13.283957] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.284157] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 13.883571] aufs 20080922
[ 13.915780] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 67.837445] udev: starting version 141
[ 68.096164] acpi device:05: registered as cooling_device1
[ 68.097114] acpi device:06: registered as cooling_device2
[ 68.097639] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 68.132320] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 68.779622] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) ->
IRQ 16
[ 68.779878] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 68.809992] hda_codec: Unknown model for ALC883, trying auto-probe
from
BIOS...
[ 69.056704] sdhci: Secure Digital Host Controller Interface driver
[ 69.056713] sdhci: Copyright(c) Pierre Ossman
[ 69.070551] sdhci-pci 0000:00:1e.0: SDHCI controller found
[8086:811c]
(rev 7)
[ 69.070578] sdhci-pci 0000:00:1e.0: PCI INT A -> GSI 16 (level,
low) ->
IRQ 16
[ 69.070702] sdhci-pci 0000:00:1e.0: setting latency timer to 64
[ 69.070961] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA
[ 69.074076] sdhci-pci 0000:00:1e.1: SDHCI controller found
[8086:811d]
(rev 7)
[ 69.074097] sdhci-pci 0000:00:1e.1: PCI INT B -> GSI 17 (level,
low) ->
IRQ 17
[ 69.074148] sdhci-pci 0000:00:1e.1: setting latency timer to 64
[ 69.074331] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA
[ 69.074359] sdhci-pci 0000:00:1e.2: SDHCI controller found
[8086:811e]
(rev 7)
[ 69.074377] sdhci-pci 0000:00:1e.2: PCI INT C -> GSI 18 (level,
low) ->
IRQ 18
[ 69.074422] sdhci-pci 0000:00:1e.2: setting latency timer to 64
[ 69.074647] mmc2: SDHCI controller on PCI [0000:00:1e.2] using DMA
[ 69.271679] input: PC Speaker as /devices/platform/pcspkr/input/
input7
[ 82.789959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 82.789970] Bluetooth: BNEP filters: protocol multicast
[ 82.853439] Bridge firewalling registered
[ 85.554825] lp: driver loaded but no devices found
[ 85.586605] ppdev: user-space parallel port driver
[ 89.161032] r8169: eth0: link down
[ 89.161564] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 96.132732] hda-intel: Invalid position buffer, using LPIB read
method
instead.
[ 96.132813] hda-intel: IRQ timing workaround is activated for card
#0.
Suggest a bigger bdl_pos_adj.
[ 107.193881] CPU0 attaching NULL sched-domain.
[ 107.218482] CPU0 attaching NULL sched-domain.
ubuntu@ubuntu:~$ cl
The program 'cl' is currently not installed. You can install it by
typing:
sudo apt-get install cl-launch
You will have to enable the component called 'universe'
bash: cl: command not found
ubuntu@ubuntu:~$ clear
ubuntu@ubuntu:~$ sudo dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc
version
4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC
2009
(Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000
(usable)
[ 0.000000] BIOS-e820: 000000007f680000 - 000000007f690000
(reserved)
[ 0.000000] BIOS-e820: 000000007f690000 - 000000007f69e000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000007f69e000 - 000000007f6d0000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e0000
(reserved)
[ 0.000000] BIOS-e820: 000000007f6e8000 - 000000007f800000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
it
around.
[ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000
(reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f680000 (usable)
[ 0.000000] modified: 000000007f680000 - 000000007f690000
(reserved)
[ 0.000000] modified: 000000007f690000 - 000000007f69e000 (ACPI
data)
[ 0.000000] modified: 000000007f69e000 - 000000007f6d0000 (ACPI
NVS)
[ 0.000000] modified: 000000007f6d0000 - 000000007f6e0000
(reserved)
[ 0.000000] modified: 000000007f6e8000 - 000000007f800000
(reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000
(reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @
10000-16000
[ 0.000000] RAMDISK: 7ef1c000 - 7f67f993
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fe4993
[ 0.000000] Move RAMDISK from 000000007ef1c000 - 000000007f67f992
to
00881000 - 00fe4992
[ 0.000000] ACPI: RSDP 000F9080, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 7F690100, 005C (r1 111909 XSDT1533 20091119
MSFT
97)
[ 0.000000] ACPI: FACP 7F690290, 00F4 (r4 111909 FACP1533 20091119
MSFT
97)
[ 0.000000] ACPI: DSDT 7F690430, 3D87 (r2 7652I 7652I102 102
INTL
20051117)
[ 0.000000] ACPI: FACS 7F69E000, 0040
[ 0.000000] ACPI: APIC 7F690390, 005C (r2 111909 APIC1533 20091119
MSFT
97)
[ 0.000000] ACPI: MCFG 7F6903F0, 003C (r1 111909 OEMMCFG 20091119
MSFT
97)
[ 0.000000] ACPI: OEMB 7F69E040, 012C (r1 111909 OEMB1533 20091119
MSFT
97)
[ 0.000000] ACPI: HPET 7F6941C0, 0038 (r1 111909 OEMHPET 20091119
MSFT
97)
[ 0.000000] ACPI: GSCI 7F69E170, 2024 (r1 111909 GMCHSCI 20091119
MSFT
97)
[ 0.000000] ACPI: SSDT 7F6A0470, 04F0 (r1 PmRef CpuPm 3000
INTL
20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1154MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==>
[0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==>
[000087d000 - 0000881000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fe4993] NEW RAMDISK ==>
[0000881000 - 0000fe4993]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==>
[0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f680
[ 0.000000] On node 0 totalpages: 521743
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80,
node_mem_map
c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2310 pages used for memmap
[ 0.000000] HighMem zone: 293244 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000,
GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7f800000:7f600000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total
pages: 517665
[ 0.000000] Kernel command line: initrd=/ubninit
file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
BOOT_IMAGE=/ubnkern
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[ 0.000000] Detected 1097.262 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7,
524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] allocated 10436800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't
want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2043432k/2087424k available (4126k kernel code,
42716k
reserved, 2208k data, 532k init, 1182216k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3,
MinObjects=0,
CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-
cpu
timer
[ 0.004000] Calibrating delay loop (skipped), value calculated
using timer
frequency.. 2194.52 BogoMIPS (lpj=4389048)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017162] SMP alternatives: switching to UP code
[ 0.344056] ACPI: Core revision 20080926
[ 0.351516] ACPI: Checking initramfs for custom DSDT
[ 1.080724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.121524] CPU0: Intel(R) Atom(TM) CPU Z510 @ 1.10GHz stepping
02
[ 1.124003] Brought up 1 CPUs
[ 1.124003] Total of 1 processors activated (2194.52 BogoMIPS).
[ 1.124003] CPU0 attaching NULL sched-domain.
[ 1.124003] net_namespace: 776 bytes
[ 1.124003] Booting paravirtualized kernel on bare hardware
[ 1.124003] Time: 3:34:03 Date: 03/17/10
[ 1.124003] regulator: core version 0.5
[ 1.124003] NET: Registered protocol family 16
[ 1.124003] EISA bus registered
[ 1.124003] ACPI: bus type pci registered
[ 1.124003] PCI: MCFG configuration 0: base e0000000 segment 0
buses 0 -
255
[ 1.124003] PCI: Not using MMCONFIG.
[ 1.124003] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last
bus=2
[ 1.124003] PCI: Using configuration type 1 for base access
[ 1.128126] ACPI: EC: Look up EC in DSDT
[ 1.139711] ACPI: Interpreter enabled
[ 1.139726] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.139790] ACPI: Using IOAPIC for interrupt routing
[ 1.139949] PCI: MCFG configuration 0: base e0000000 segment 0
buses 0 -
255
[ 1.146577] PCI: MCFG area at e0000000 reserved in ACPI
motherboard
resources
[ 1.146586] PCI: Using MMCONFIG for extended config space
[ 1.159955] ACPI: No dock devices found.
[ 1.160157] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.160370] pci 0000:00:02.0: reg 10 32bit mmio:
[0xfe980000-0xfe9fffff]
[ 1.160386] pci 0000:00:02.0: reg 14 io port: [0xc880-0xc887]
[ 1.160400] pci 0000:00:02.0: reg 18 32bit mmio:
[0xd0000000-0xdfffffff]
[ 1.160414] pci 0000:00:02.0: reg 1c 32bit mmio:
[0xfe940000-0xfe97ffff]
[ 1.160544] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xfe938000-0xfe93bfff]
[ 1.160594] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 1.160603] pci 0000:00:1b.0: PME# disabled
[ 1.160672] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.160682] pci 0000:00:1c.0: PME# disabled
[ 1.160753] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.160763] pci 0000:00:1c.1: PME# disabled
[ 1.160832] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]
[ 1.160902] pci 0000:00:1d.1: reg 20 io port: [0xc080-0xc09f]
[ 1.160971] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f]
[ 1.161066] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xfe937c00-0xfe937fff]
[ 1.161141] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.161152] pci 0000:00:1d.7: PME# disabled
[ 1.161193] pci 0000:00:1e.0: reg 10 32bit mmio:
[0xfe937800-0xfe9378ff]
[ 1.161275] pci 0000:00:1e.1: reg 10 32bit mmio:
[0xfe937400-0xfe9374ff]
[ 1.161348] pci 0000:00:1e.2: reg 10 32bit mmio:
[0xfe937000-0xfe9370ff]
[ 1.161514] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 1.161617] pci 0000:01:00.0: reg 10 io port: [0xdd00-0xddff]
[ 1.161650] pci 0000:01:00.0: reg 18 64bit mmio:
[0xfeaff000-0xfeafffff]
[ 1.161675] pci 0000:01:00.0: reg 20 64bit mmio:
[0xcfff0000-0xcfffffff]
[ 1.161692] pci 0000:01:00.0: reg 30 32bit mmio:
[0xfeac0000-0xfeadffff]
[ 1.161713] pci 0000:01:00.0: supports D1 D2
[ 1.161720] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 1.161730] pci 0000:01:00.0: PME# disabled
[ 1.161818] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 1.161828] pci 0000:00:1c.0: bridge 32bit mmio:
[0xfea00000-0xfeafffff]
[ 1.161840] pci 0000:00:1c.0: bridge 32bit mmio pref: [0xcff00000-
0xcfffffff]
[ 1.161931] pci 0000:02:00.0: reg 10 64bit mmio:
[0xfebffc00-0xfebffc7f]
[ 1.161958] pci 0000:02:00.0: reg 18 64bit mmio:
[0xfebf8000-0xfebfbfff]
[ 1.161975] pci 0000:02:00.0: reg 20 io port: [0xe880-0xe8ff]
[ 1.162002] pci 0000:02:00.0: reg 30 32bit mmio:
[0xfeb00000-0xfeb7ffff]
[ 1.162025] pci 0000:02:00.0: supports D1 D2
[ 1.162105] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 1.162116] pci 0000:00:1c.1: bridge 32bit mmio:
[0xfeb00000-0xfebfffff]
[ 1.162141] bus 00 -> node 0
[ 1.162160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.162717] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.POP4._PRT]
[ 1.163031] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.POP5._PRT]
[ 1.182213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11
12 14
15)
[ 1.182598] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11
12 14
15)
[ 1.182977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11
12 14
15)
[ 1.183355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11
12 14
*15)
[ 1.183733] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.184132] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.184514] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.184904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
12 14
15) *0, disabled.
[ 1.185278] ACPI Warning (tbutils-0217): Incorrect checksum in
table
[OEMB] - 07, should be 58 [20080926]
[ 1.186551] ACPI: WMI: Mapper loaded
[ 1.187074] SCSI subsystem initialized
[ 1.187198] libata version 3.00 loaded.
[ 1.187342] usbcore: registered new interface driver usbfs
[ 1.187395] usbcore: registered new interface driver hub
[ 1.187488] usbcore: registered new device driver usb
[ 1.187831] PCI: Using ACPI for IRQ routing
[ 1.188067] Bluetooth: Core ver 2.13
[ 1.188154] NET: Registered protocol family 31
[ 1.188160] Bluetooth: HCI device and connection manager
initialized
[ 1.188169] Bluetooth: HCI socket layer initialized
[ 1.188176] NET: Registered protocol family 8
[ 1.188181] NET: Registered protocol family 20
[ 1.188215] NetLabel: Initializing
[ 1.188221] NetLabel: domain hash size = 128
[ 1.188225] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.188262] NetLabel: unlabeled traffic allowed by default
[ 1.188296] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.188311] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.192184] AppArmor: AppArmor Filesystem Enabled
[ 1.192207] pnp: PnP ACPI init
[ 1.192207] ACPI: bus type pnp registered
[ 1.196030] Switched to high resolution mode on CPU 0
[ 1.198870] pnp: PnP ACPI: found 13 devices
[ 1.198878] ACPI: ACPI bus type pnp unregistered
[ 1.198888] PnPBIOS: Disabled by ACPI PNP
[ 1.198917] system 00:01: iomem range 0x7f800000-0x7fffffff has
been
reserved
[ 1.198938] system 00:05: ioport range 0xa00-0xa0f has been
reserved
[ 1.198947] system 00:05: ioport range 0xa10-0xa1f has been
reserved
[ 1.198965] system 00:06: ioport range 0x4d0-0x4d1 has been
reserved
[ 1.198974] system 00:06: ioport range 0x900-0x9f3 has been
reserved
[ 1.198982] system 00:06: ioport range 0x400-0x43f has been
reserved
[ 1.198990] system 00:06: ioport range 0x480-0x4bf has been
reserved
[ 1.199000] system 00:06: iomem range 0xf0000000-0xf0003fff has
been
reserved
[ 1.199026] system 00:0a: iomem range 0xfec00000-0xfec00fff has
been
reserved
[ 1.199035] system 00:0a: iomem range 0xfee00000-0xfee00fff has
been
reserved
[ 1.199052] system 00:0b: iomem range 0xe0000000-0xefffffff has
been
reserved
[ 1.199069] system 00:0c: iomem range 0x0-0x9ffff could not be
reserved
[ 1.199078] system 00:0c: iomem range 0xc0000-0xcffff could not be
reserved
[ 1.199087] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
[ 1.199096] system 00:0c: iomem range 0x100000-0x7f7fffff could not
be
reserved
[ 1.234163] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 1.234174] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 1.234187] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
[ 1.234198] pci 0000:00:1c.0: PREFETCH window: 0x000000cff00000-
0x000000cfffffff
[ 1.234212] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 1.234221] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 1.234232] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 1.234241] pci 0000:00:1c.1: PREFETCH window: disabled
[ 1.234279] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 1.234291] pci 0000:00:1c.0: setting latency timer to 64
[ 1.234310] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 1.234320] pci 0000:00:1c.1: setting latency timer to 64
[ 1.234331] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.234338] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.234345] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.234352] bus: 01 index 1 mmio: [0xfea00000-0xfeafffff]
[ 1.234359] bus: 01 index 2 mmio: [0xcff00000-0xcfffffff]
[ 1.234366] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.234372] bus: 02 index 0 io port: [0xe000-0xefff]
[ 1.234379] bus: 02 index 1 mmio: [0xfeb00000-0xfebfffff]
[ 1.234386] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.234392] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.234420] NET: Registered protocol family 2
[ 1.234792] IP route cache hash table entries: 32768 (order: 5,
131072
bytes)
[ 1.235562] TCP established hash table entries: 131072 (order: 8,
1048576
bytes)
[ 1.236936] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 1.237694] TCP: Hash tables configured (established 131072 bind
65536)
[ 1.237704] TCP reno registered
[ 1.238091] NET: Registered protocol family 1
[ 1.238429] checking if image is initramfs... it is
[ 2.695020] Freeing initrd memory: 7566k freed
[ 2.695335] cpufreq: No nForce2 chipset.
[ 2.695698] audit: initializing netlink socket (disabled)
[ 2.695744] type=2000 audit(1268796844.692:1): initialized
[ 2.716535] highmem bounce pool size: 64 pages
[ 2.716551] HugeTLB registered 4 MB page size, pre-allocated 0
pages
[ 2.720490] VFS: Disk quotas dquot_6.5.1
[ 2.720679] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 2.722555] fuse init (API version 7.10)
[ 2.722806] msgmni has been set to 1698
[ 2.723315] alg: No test for stdrng (krng)
[ 2.723356] io scheduler noop registered
[ 2.723363] io scheduler anticipatory registered
[ 2.723369] io scheduler deadline registered
[ 2.723427] io scheduler cfq registered (default)
[ 2.723467] pci 0000:00:02.0: Boot video device
[ 2.727115] pcieport-driver 0000:00:1c.0: setting latency timer to
64
[ 2.727177] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.727225] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.727330] pcieport-driver 0000:00:1c.1: setting latency timer to
64
[ 2.727393] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.727433] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.727573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.728464] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 2.728829] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 2.728839] ACPI: Sleep Button (CM) [SLPB]
[ 2.728977] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.728986] ACPI: Power Button (CM) [PWRB]
[ 2.729121] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.729249] ACPI: Lid Switch [LID]
[ 2.730705] ACPI: SSDT 7F6A0270, 01FA (r1 PmRef Cpu0Ist 3000
INTL
20051117)
[ 2.731827] processor ACPI_CPU:00: registered as cooling_device0
[ 2.736540] isapnp: Scanning for PnP cards...
[ 3.091664] isapnp: No Plug & Play device found
[ 3.095637] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.095813] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.095988] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.098624] brd: module loaded
[ 3.099595] loop: module loaded
[ 3.099833] Fixed MDIO Bus: probed
[ 3.099850] PPP generic driver version 2.4.2
[ 3.100073] input: Macintosh mouse button emulation as
/devices/virtual/input/input3
[ 3.100165] Driver 'sd' needs updating - please use bus_type
methods
[ 3.100193] Driver 'sr' needs updating - please use bus_type
methods
[ 3.100538] sata_sil24 0000:02:00.0: version 1.1
[ 3.100572] sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level,
low) ->
IRQ 17
[ 3.100726] sata_sil24 0000:02:00.0: setting latency timer to 64
[ 3.101258] scsi0 : sata_sil24
[ 3.101554] scsi1 : sata_sil24
[ 3.101676] ata1: SATA max UDMA/100 host m128@0xfebffc00 port
0xfebf8000
irq 17
[ 3.101687] ata2: SATA max UDMA/100 host m128@0xfebffc00 port
0xfebfa000
irq 17
[ 5.180046] ata1: SATA link down (SStatus 0 SControl 0)
[ 7.260040] ata2: SATA link down (SStatus 0 SControl 0)
[ 7.261605] pata_sch 0000:00:1f.1: version 0.2
[ 7.261695] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 7.261863] scsi2 : pata_sch
[ 7.262038] scsi3 : pata_sch
[ 7.263058] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma
0xffa0 irq
14
[ 7.263068] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma
0xffa8 irq
15
[ 7.432409] ata3.00: ATA-0: CF 1GB, 20051220, max MWDMA2
[ 7.432418] ata3.00: 2030112 sectors, multi 0: LBA
[ 7.440407] ata3.00: configured for MWDMA2
[ 7.456405] ata3.00: configured for MWDMA2
[ 7.456414] ata3: EH complete
[ 7.623206] scsi 2:0:0:0: Direct-Access ATA CF
1GB 2005
PQ: 0 ANSI: 5
[ 7.623508] sd 2:0:0:0: [sda] 2030112 512-byte hardware sectors:
(1.03
GB/991 MiB)
[ 7.623570] sd 2:0:0:0: [sda] Write Protect is off
[ 7.623578] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.623678] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled,
doesn't support DPO or FUA
[ 7.623882] sd 2:0:0:0: [sda] 2030112 512-byte hardware sectors:
(1.03
GB/991 MiB)
[ 7.623940] sd 2:0:0:0: [sda] Write Protect is off
[ 7.623948] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.624067] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled,
doesn't support DPO or FUA
[ 7.624080] sda: sda1
[ 7.624978] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.625126] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.625483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 7.625556] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low)
-> IRQ
19
[ 7.625605] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.625615] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.625780] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus
number 1
[ 7.629746] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.629761] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
supported
[ 7.629805] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe937c00
[ 7.644031] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.644241] usb usb1: configuration #1 chosen from 1 choice
[ 7.644324] hub 1-0:1.0: USB hub found
[ 7.644347] hub 1-0:1.0: 8 ports detected
[ 7.644676] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.644737] uhci_hcd: USB Universal Host Controller Interface
driver
[ 7.644832] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low)
-> IRQ
16
[ 7.644848] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.644856] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.644984] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus
number 2
[ 7.645043] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
[ 7.645266] usb usb2: configuration #1 chosen from 1 choice
[ 7.645346] hub 2-0:1.0: USB hub found
[ 7.645368] hub 2-0:1.0: 2 ports detected
[ 7.645597] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low)
-> IRQ
17
[ 7.645612] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.645621] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.645751] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus
number 3
[ 7.645791] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080
[ 7.646008] usb usb3: configuration #1 chosen from 1 choice
[ 7.646088] hub 3-0:1.0: USB hub found
[ 7.646108] hub 3-0:1.0: 2 ports detected
[ 7.646376] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ
18
[ 7.646392] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.646400] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.646526] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus
number 4
[ 7.646581] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 7.646797] usb usb4: configuration #1 chosen from 1 choice
[ 7.646875] hub 4-0:1.0: USB hub found
[ 7.646894] hub 4-0:1.0: 2 ports detected
[ 7.647245] usbcore: registered new interface driver libusual
[ 7.647349] usbcore: registered new interface driver usbserial
[ 7.647380] USB Serial support registered for generic
[ 7.647424] usbcore: registered new interface driver
usbserial_generic
[ 7.647430] usbserial: USB Serial Driver core
[ 7.647572] PNP: No PS/2 controller found. Probing ports directly.
[ 7.650246] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.650263] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.650606] mice: PS/2 mouse device common for all mice
[ 7.651072] rtc_cmos 00:02: RTC can wake from S4
[ 7.651173] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 7.651217] rtc0: alarms up to one month, y3k, 114 bytes nvram,
hpet irqs
[ 7.651426] device-mapper: uevent: version 1.0.3
[ 7.651728] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised:
dm-d...@redhat.com
[ 7.651870] device-mapper: multipath: version 1.0.5 loaded
[ 7.651878] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 7.652148] EISA: Probing bus 0 at eisa.0
[ 7.652220] EISA: Detected 0 cards.
[ 7.652297] cpuidle: using governor ladder
[ 7.652304] cpuidle: using governor menu
[ 7.653874] TCP cubic registered
[ 7.654198] NET: Registered protocol family 10
[ 7.655449] lo: Disabled Privacy Extensions
[ 7.656474] NET: Registered protocol family 17
[ 7.656535] Bluetooth: L2CAP ver 2.11
[ 7.656541] Bluetooth: L2CAP socket layer initialized
[ 7.656549] Bluetooth: SCO (Voice Link) ver 0.6
[ 7.656554] Bluetooth: SCO socket layer initialized
[ 7.656648] Bluetooth: RFCOMM socket layer initialized
[ 7.656668] Bluetooth: RFCOMM TTY layer initialized
[ 7.656674] Bluetooth: RFCOMM ver 1.10
[ 7.657735] Using IPI No-Shortcut mode
[ 7.658005] registered taskstats version 1
[ 7.658296] Magic number: 2:602:563
[ 7.658325] platform Fixed MDIO bus.0: hash matches
[ 7.658429] rtc_cmos 00:02: setting system clock to 2010-03-17
03:34:10
UTC (1268796850)
[ 7.658439] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.658444] EDD information not available.
[ 7.659001] Freeing unused kernel memory: 532k freed
[ 7.659366] Write protecting the kernel text: 4128k
[ 7.659493] Write protecting the kernel read-only data: 1532k
[ 8.068042] usb 1-6: new high speed USB device using ehci_hcd and
address
4
[ 8.203694] usb 1-6: configuration #1 chosen from 1 choice
[ 8.247655] Initializing USB Mass Storage driver...
[ 8.273664] scsi4 : SCSI emulation for USB Mass Storage devices
[ 8.273961] usbcore: registered new interface driver usb-storage
[ 8.273973] USB Mass Storage support registered.
[ 8.274206] usb-storage: device found at 4
[ 8.274212] usb-storage: waiting for device to settle before
scanning
[ 8.460047] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[ 8.615331] usb 2-1: configuration #1 chosen from 1 choice
[ 8.856071] usb 2-2: new low speed USB device using uhci_hcd and
address 3
[ 8.890751] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.890788] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 8.890821] r8169 0000:01:00.0: setting latency timer to 64
[ 8.891026] r8169 0000:01:00.0: irq 2303 for MSI/MSI-X
[ 8.892901] eth0: RTL8168c/8111c at 0xf7d92000, 00:50:c2:1f:33:a9,
XID
3c4000c0 IRQ 2303
[ 9.030314] usb 2-2: configuration #1 chosen from 1 choice
[ 11.076098] usbcore: registered new interface driver hiddev
[ 11.089800] input: HID 413c:3010 as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 11.120262] generic-usb 0003:413C:3010.0001: input,hidraw0: USB HID
v1.00
Mouse [HID 413c:3010] on usb-0000:00:1d.0-1/input0
[ 11.120403] usbcore: registered new interface driver usbhid
[ 11.120414] usbhid: v2.6:USB HID core driver
[ 11.272533] input: DELL DELL USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[ 11.288681] dell 0003:413C:2005.0002: input,hidraw1: USB HID v1.10
Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-2/input0
[ 13.272274] usb-storage: device scan complete
[ 13.273148] scsi 4:0:0:0: Direct-Access Kingston DataTraveler
2.0 1.00
PQ: 0 ANSI: 2
[ 13.276360] sd 4:0:0:0: [sdb] 1952768 512-byte hardware sectors:
(999
MB/953 MiB)
[ 13.277826] sd 4:0:0:0: [sdb] Write Protect is off
[ 13.277837] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.277844] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.281006] sd 4:0:0:0: [sdb] 1952768 512-byte hardware sectors:
(999
MB/953 MiB)
[ 13.282511] sd 4:0:0:0: [sdb] Write Protect is off
[ 13.282523] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 13.282530] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 13.282547] sdb: sdb1
[ 13.283957] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 13.284157] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 13.883571] aufs 20080922
[ 13.915780] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 67.837445] udev: starting version 141
[ 68.096164] acpi device:05: registered as cooling_device1
[ 68.097114] acpi device:06: registered as cooling_device2
[ 68.097639] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 68.132320] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 68.779622] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) ->
IRQ 16
[ 68.779878] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 68.809992] hda_codec: Unknown model for ALC883, trying auto-probe
from
BIOS...
[ 69.056704] sdhci: Secure Digital Host Controller Interface driver
[ 69.056713] sdhci: Copyright(c) Pierre Ossman
[ 69.070551] sdhci-pci 0000:00:1e.0: SDHCI controller found
[8086:811c]
(rev 7)
[ 69.070578] sdhci-pci 0000:00:1e.0: PCI INT A -> GSI 16 (level,
low) ->
IRQ 16
[ 69.070702] sdhci-pci 0000:00:1e.0: setting latency timer to 64
[ 69.070961] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA
[ 69.074076] sdhci-pci 0000:00:1e.1: SDHCI controller found
[8086:811d]
(rev 7)
[ 69.074097] sdhci-pci 0000:00:1e.1: PCI INT B -> GSI 17 (level,
low) ->
IRQ 17
[ 69.074148] sdhci-pci 0000:00:1e.1: setting latency timer to 64
[ 69.074331] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA
[ 69.074359] sdhci-pci 0000:00:1e.2: SDHCI controller found
[8086:811e]
(rev 7)
[ 69.074377] sdhci-pci 0000:00:1e.2: PCI INT C -> GSI 18 (level,
low) ->
IRQ 18
[ 69.074422] sdhci-pci 0000:00:1e.2: setting latency timer to 64
[ 69.074647] mmc2: SDHCI controller on PCI [0000:00:1e.2] using DMA
[ 69.271679] input: PC Speaker as /devices/platform/pcspkr/input/
input7
[ 82.789959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 82.789970] Bluetooth: BNEP filters: protocol multicast
[ 82.853439] Bridge firewalling registered
[ 85.554825] lp: driver loaded but no devices found
[ 85.586605] ppdev: user-space parallel port driver
[ 89.161032] r8169: eth0: link down
[ 89.161564] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 96.132732] hda-intel: Invalid position buffer, using LPIB read
method
instead.
[ 96.132813] hda-intel: IRQ timing workaround is activated for card
#0.
Suggest a bigger bdl_pos_adj.
[ 107.193881] CPU0 attaching NULL sched-domain.
[ 107.218482] CPU0 attaching NULL sched-domain.
sudo lsusb:
Bus 001 Device 004: ID 0951:1607 Kingston Technology Data Traveler 2.0
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 002 Device 002: ID 413c:3010 Dell Computer Corp. Optical Wheel
Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
On Mar 16, 11:43 am, Andrew Armenia <and...@asquaredlabs.com> wrote:
> If you can get the USB drive to boot, try dropping to a shell with a CF card
> loaded. Then run "dmesg" and send me the output. If not, try booting a Linux
> live CD (e.g. from a USB CD drive) while a CF card is inserted. Then run
> "sudo dmesg" and "sudo lsusb" and send the output. Thanks.
>
> -Andrew
>
> On Tue, Mar 16, 2010 at 1:38 PM, Andrew Armenia <and...@asquaredlabs.com>wrote:
>
> > Please try doing a Concerto flash drive install using the procedure at
> >http://www.concerto-signage.com/help_pages/33. I also suspect that the CF
> > reader on this machine is really a USB device, so you may need to follow the
> > procedure on that page to set the "rootwait" parameter. We have received a
> > number of reports of USB issues with the current Concerto Player build, so I
> > will be taking a look at this in the near future.
>
> > -Andrew
>
> > On Tue, Mar 16, 2010 at 12:58 PM, Richie Rich <richardduv...@gmail.com>wrote:
>
> >> I am working on deploying Concerto on a new machine and am having some
> >> trouble. Our other units handle Concerto beautifully with almost no
> >> config time required.
>
> >> New Machine:
> >>http://www.newegg.com/Product/Product.aspx?Item=N82E16859324001&Tpk=b...
> >> Problem: "failed to mount CF card, system dead..."
>
> >> I have added the rootwait=10 to the APPEND line in the syslinux.cfg
> >> file and it worked. It forced the system to wait before boot. After
> >> the 10 second wait I get this:
>
> >> mount: /dev/hda1 is not a valid block device
> >> mount: /dev/hdb1 is not a valid block device
> >> mount: /dev/hdc1 is not a valid block device
> >> mount: /dev/hdd1 is not a valid block device
> >> mount: /dev/sda1 is not a valid block device
> >> mount: /dev/sdb1 is not a valid block device
> >> mount: /dev/sdc1 is not a valid block device
> >> mount: /dev/sdd1 is not a valid block device
> >> mount: /dev/hda is not a valid block device
> >> failed to mount CF card, system dead...
>
> >> We really like this unit because it front loads a CF card allowing to
> >> easily swap out the OS medium should it become damaged without having
> >> to take a unit down and then take it apart. Any ideas?
>
> >> Thanks!
>
> >> --
> >> You received this message because you are subscribed to the Google Groups
> >> "Concerto Digital Signage" group.
> >> To post to this group, send email to
> >> concerto-dig...@googlegroups.com.
> >> To unsubscribe from this group, send email to
> >> concerto-digital-s...@googlegroups.com<concerto-digital-signage%2Bunsu...@googlegroups.com>
To unsubscribe from this group, send email to concerto-digital-s...@googlegroups.com.
To unsubscribe from this group, send email to concerto-digital-s...@googlegroups.com.
append initrd=/initrd root=/dev/ram0 init=/sbin/concerto_boot cdboot=1
append initrd=/initrd root=/dev/ram0 init=/sbin/concerto_boot cdboot=1 rootwait=20That may help when booting from a USB device. As far as your built-in CF reader goes, I took another look at your dmesg output and it appears to actually be a PATA device. This should be supported using the pata_sch driver, which may not have been included in your kernel. I am going to look at rebuilding the kernel and distributing the update later today. This should also address the USB issues other folks are experiencing.