On 25 Mai, 01:06, Mic <
mic_carusoQWE...@libero.it> wrote:
> Thanks Siggi, another question:
> what is minimum hardware requirements for ZEDDYNET?
That depends on the network application you want to use:
you need in any case 8K ram @ address 8-16K, which is used to hold
network system variables and buffers
Within the normal 16K ram (BASIC area) the following network
applications could be run:
IPCONFIG, IRC chat, mini-sendmail, TELNET
I you want to load a P file (using NFM or ZeddyFox) into the BASIC
area, those programs then need to run above 32K (with M1-NOT logic
installed) to leave space for the P file: you need additional 8K above
32K to run NCLI (the command line interface of NFM).
If you have 16KB above 32K then you could run NFM and ZeddyFox to
download P files from a TNFS-server or a web-server.
So 24K ram from address 8-32K is minimum, 40K (from address 8-48K) is
optimum.
And you need of course the network card with WIZ 811 or WIZ 812
module.
Siggi