I did the search for you... Please try
http://www.sendspace.com/file/l2gebz .
I think E1000/E also contains the drivers for the E100 .
I am now building you another version with CONFIG_E100, and if it
builds OK I will upload it somewhere but it will take some time - and
will be untested (cf. to the previous link which has been thoroughly
tested on a couple of targets).
Please let me know if that iso worked for you, and if it didn't you
can expect a new one (again, untested!) in a couple of hours.
-Ron
> Hi Ron,
> android-x86+unsubscribe@googlegroups.com.
>> > android-x86+unsubscribe@googlegroups.com.
>> > For more options, visit this group at
>> > http://groups.google.com/group/android-x86?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Android-x86" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/android-x86/-/0qGoYnovWQoJ.
>
> To post to this group, send email to andro...@googlegroups.com.
> To unsubscribe from this group, send email to
> android-x86+unsubscribe@googlegroups.com.
Hallo!I have applied the patches and it works fine, is there a way to set a static IP address?Thank you!
You should be able to do that form the Settings --> Ethernet menu.
Check the non-DHCP radio button and put your static settings.
If that does not work - go to the console, and configure it with
"ifconfig" as if you were on any linux distribution.
Verify your settings with "netcfg".
Anyway - settings/static IP should work.
>> Hallo!
>> I have applied the patches and it works fine, is there a way to set a
>> static IP address?
>> Thank you!
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Android-x86" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/android-x86/-/TsS0L4py59AJ.
>
> To post to this group, send email to andro...@googlegroups.com.
> To unsubscribe from this group, send email to
Of course you can. You have the sources :-)
> Hi Ron and thanks for your reply!
> I know that i can do it from setting or shell commands but i meant if it
> could be done internally by modifying maybe source code.
>
>
>
> On Wednesday, July 18, 2012 12:43:23 PM UTC+2, Ron M wrote:
>>
>> You should be able to do that form the Settings --> Ethernet menu.
>> Check the non-DHCP radio button and put your static settings.
>>
>> If that does not work - go to the console, and configure it with
>> "ifconfig" as if you were on any linux distribution.
>> Verify your settings with "netcfg".
>>
>> Anyway - settings/static IP should work.
>>
>>
>> >> Hallo!
>> >> I have applied the patches and it works fine, is there a way to set a
>> >> static IP address?
>> >> Thank you!
>> >>
>> > --
>> > You received this message because you are subscribed to the Google
>> > Groups
>> > "Android-x86" group.
>> > To view this discussion on the web visit
>> > https://groups.google.com/d/msg/android-x86/-/TsS0L4py59AJ.
>> >
>> > To post to this group, send email to andro...@googlegroups.com.
>> > To unsubscribe from this group, send email to
>> > android-x86+unsubscribe@googlegroups.com.
>> > For more options, visit this group at
>> > http://groups.google.com/group/android-x86?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Android-x86" group.
> To view this discussion on the web visit
> https://groups.google.com/d/msg/android-x86/-/M-joB30CFxIJ.
>
> To post to this group, send email to andro...@googlegroups.com.
> To unsubscribe from this group, send email to
> android-x86+unsubscribe@googlegroups.com.
Bruce - as per SystemUI stopped working - I suggest you disable GPU acceleration (HWACCEL=0 on kernel boot)
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/ffVR-Kb1ewsJ.
Hi guys,
For those of you who wanted to integrate an Ethernet patch to their
recent build,
this is a slightly modified version of my previous patch set derived
from the work of Henry, Robill, Yi and others (@see
https://groups.google.com/forum/#!topic/android-x86/MPoj2Bzd-rE)
Change set:
1. Applies on 4.0.4 variants
2. If an interface called "eth*" exists - it will select the lowest
eth number as the eth device, so that it can connect automatically to
the ethernet device, rather than choose automatically
sit or ipv6 tunneling devices.
3. Removed the misleading "No internet connection" when internet is connected.
I tested it on a couple of IMM76I and IMM76L targets.
There is still more work to be done, but that should get you going
without much trouble.
BTW: I have another patch set which has the ethernet configuration be
toggled by a switch as with the Wi-Fi and Bluetooth case in the
Settings application, but it was too quick, and too dirty so I am not
posting it yet. If anyone would like to have that feature, or even
better work on it (Just need to change the Setting and SystemUI
(Tablet) apps, but it's quite multi-layered so they need to know what
they're doing)
##### How to apply the patch: #####
# Copy the attached tarball to your AX86 build top directory and do
the following steps:
tar -xzvf EthernetPatch_IMM76I_L.tar.gz
cd build/
git apply 0001-Adding-Ethernet-patch-for-android-x86-4.0-RC1-AOSP-4.patch
cd ..
cd frameworks/base/
git apply 0001-Ethernet-support-Patch-for-ICS4.0.4-IMM76I.patch
cd ../../
cd packages/providers/DownloadProvider/
git apply 0001-Adding-Ethernet-patch-Cr-android-x86-4.0-RC1-AOSP-4..patch
cd ../../../
cd packages/apps/Settings/
git apply 0001-Ethernet-support-Patch-for-ICS4.0.4-IMM76I.patch
Some kernel configuration for the interested reader:
##### Kernel Config snippet #####
< CONFIG_NET_ETHERNET=y
< CONFIG_NET_PCI=y
< CONFIG_E1000E=y
< ## XEN
< CONFIG_8139CP=y
< CONFIG_8139TOO=y
<
< ## VirtualBox
< CONFIG_PCNET32=y
Have fun, drive safe.
-Ron
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
I installed android-x86-4.0-RC2-eeepc.iso in xen successfully. It works great except for ethernet/vif support. I configure it with a vif interface and the OS does not list an eth0 or any eth interface.
I am reading but I would like to ask for direction. Should I apply the patch below? Download a build with support already integrated?
I have not ever compiled android but would like to. Someone mentioned somewhere that the below patch would work if the interface is already there. Else I would need to compile a module for support. Are they wrong?
Thanks,
Web..
Hi Ron,
I'm new to this field. I gone through your post here and tried to apply the patch. I used both terminal emulator and in debug mode, both returned me 'git' function is not available. what can I do now? I need to apply the eth0 patch. Please help! how and where to exactly apply the patch.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/spcF275Pq-MJ.
Hi Ron,I've applied your patch without problems, however, the ethernet service ends up trying to use an IPv6 tunneling interface.I cannot see the code filtering the interface names to get only eth*, did I missed something?Cheers,