Android-x86 4.4-r3 is released

[Chih-Wei Huang]

Hi all,
A bad news to me was I sprained my ankle.
So I took two days sick leave.
A good news is I had time to clean up
all tasks in my todo list of kitkat-x86 to
release the 4.4-r3:

http://www.android-x86.org/releases/releasenote-4-4-r3

However, since the SourceForge is down now,
I uploaded the two files to Google Drive:

https://drive.google.com/file/d/0B5bbP1aYGPSTU05Sb2I0NWwxaEk/view?usp=sharing
https://drive.google.com/file/d/0B5bbP1aYGPSTS2o2b2l6Ul9XME0/view?usp=sharing

I'm excited about the release since
there are many big improvements in it.
For example, android-x86-4.4-r3.img could be
booted and installed to ASUS T100
and almost everything works (except the camera).

Enjoy it!

--
Chih-Wei
Android-x86 project
http://www.android-x86.org

[Pedro Ivo Gama]

Bluetooth not working on my iconia w500 with bluez

[André Vitor]

Bluetooth not working here, but my problem is the 4.0.8 kernel. General realtek usb bluetooth, in my case the chip combo wifi+bt "rtl8723au", seem to be working using 4.1 kernel or later. I will test it and report here the results.

Using a generic usb bluetooth works here as expected.

[Rinaldo Jonathan]

Uhh... get well soon for your ankle :)

I'm downloading this image tonight. Will try tomorrow :D
This gonna be fun.
Thank you very much for your hard work!

I'll try to mirror this file to my blog later.

--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86...@googlegroups.com.
To post to this group, send email to andro...@googlegroups.com.
Visit this group at http://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.

[Сергей Трофимов]

On my Onda V975i V2 not work bluetooth and battery indicator.
Could you add them to the kernel?
Patch battery - https://bugzilla.kernel.org/show_bug.cgi?id=83941#c29
Bluetooth driver - https://github.com/lwfinger/rtl8723bs_bt
And a small request. Please, turn 90 degrees to the accelerometer.

[Rinaldo Jonathan]

well, here goes the original cwhuang mail, and translated to Indonesian language : http://itsrinaldo.net/?p=15191

android-x86-4.4-r3.img : http://itsrinaldo.net/upload/android-x86-4.4-r3.img

android-x86-4.4-r3.iso : http://itsrinaldo.net/upload/android-x86-4.4-r3.iso

[Rinaldo Jonathan]

well, here goes the original cwhuang mail, and translated to Indonesian language : http://itsrinaldo.net/?p=15191

android-x86-4.4-r3.img : http://itsrinaldo.net/upload/android-x86-4.4-r3.img

android-x86-4.4-r3.iso : http://itsrinaldo.net/upload/android-x86-4.4-r3.iso

Pada Sabtu, 18 Juli 2015 00.37.12 UTC+7, Rinaldo Jonathan menulis:

[pstglia]

A bad news to me was I sprained my ankle.

Nothing serious right? Hope you recover soon. 

Trying to beat my times on footrace? :D

 I'm excited about the release since 

there are many big improvements in it.
For example, android-x86-4.4-r3.img could be
booted and installed to ASUS T100
and almost everything works (except the camera).

Many thanks for this new release!

[enso montana]

android-x86 does not work 4.4.4r3 wireless card acer aspire 5253

android-x86 does not work 4.4.4r3 wireless card acer aspire 5253 

[lexblaze]

I'm using a compaq c702tu, wireless broadcom 4311 does not work, the only android iso where it work with was from Gabriel Gouguet's build from forum https://groups.google.com/forum/?fromgroups#!searchin/Android-x86/gabriel$20gouguet/android-x86/X6PTr0oGbbU/ImH1Y1V0rvwJ a

[Android-x86]

how can I set the orientation of the display ?
the sensor is KXCJK -1013 ? 

and phase-shifted by 90 ° 

[Vaidotas]

Lenovo Miix 2 8 tablet. Just updated BIOS to latest version 1.10 (90CN27WW) .

There's still issues with video not working. Booted up successfully only from second time, on DEBUG mode. I think this tablet might be cursed - something is very wrong with video.

What is working (when video actually works):
+ video acceleration
+ WiFi
+ sound
+ power button
+ home button
+ youtube plays videos with sound
+ display brightness
+ poweroff

Doesn't work:
- bluetooth
- volume buttons
- microphone
- autorotate
- battery status display

[Rinaldo Jonathan]

At ASUS T100, what will happen if I install EFI GRUB2 and choose to format mmcblk0p1? is it safe to format?

Because if I choose not to format, looks like nothing is installed!

--

[pstglia]

Hi Vaidotas,

Want to do some crazy experiments? Read this page you can mod your fw in order to access advanced settings:
https://patrikesn.wordpress.com/2015/01/11/guide-unlocking-the-hidden-bios-pages-on-lenovo-miix-2-11/

Maybe there is something that could help you out. Take a look at something that could affect CPU clocking. This seems to be the problem with this machine, based on previous logcat/dmesg you provided.

Regards,
Pstglia

[Jeevan Ghadge]

Get well soon Chih-Wei !
Great work from the whole team!

For my Acer  Switch 10 SW5-012, the working/nonworking status is mostly same as for previous version, but the good point is I can use the generic image you uploaded here rather than a custom build.

Wifi:working
Brightness: not working
sound: not working
Auto-rotate : Wierd issue. When Auto-rotate is On, the screen is by default rotated 90deg clockwise from where it should be.
Bluetooth : Not working(but dont care much for it).
External keyboard(dock that comes with tablet) : not working
Touchpad: working but bit funny as it basically acts like the touchscreen than a mouse.

[Vaidotas]

Thanks for information, I'll try to do this.

[Veti]

great work. this is a huge step forward on my bay trail device.

some things i noticed.

Text To Speech output.

The Pico engine never really worked for me.

However google released the google text to speech engine for x86 and it works like a charm.

maybe that can become the default text to speech engine?

there seems to be a problem with GL.

When i open google photos i get this exception:

E/AndroidRuntime( 4730): FATAL EXCEPTION: GLThread 240

E/AndroidRuntime( 4730): Process: com.google.android.apps.photos, PID: 4730

E/AndroidRuntime( 4730): java.lang.IllegalArgumentException: No config chosen

E/AndroidRuntime( 4730):        at lny.a(PG:760)

E/AndroidRuntime( 4730):        at loe.g(PG:3881)

E/AndroidRuntime( 4730):        at loe.run(PG:1097)

W/ActivityManager( 2233):   Force finishing activity com.google.android.apps.photos/.home.HomeActivity

W/SurfaceFlinger( 1894): captureScreen: error creating EGL fence: 0x3000

W/ActivityManager( 2233): Activity pause timeout for ActivityRecord{2c6dd870 u0 com.google.android.apps.photos/.home.HomeActivity t10 f}

W/OpenGLRenderer( 2392): Failed to wait for the fence 0x300c

I/GAV2    ( 4730): Thread[GAThread,5,main]: No campaign data found.

on google maps i get this exception.

D/dalvikvm( 2352): GC_EXPLICIT freed 267K, 16% free 6035K/7144K, paused 1ms+2ms, total 20ms

I/dalvikvm( 5178): Could not compile trace for Ljava/util/Arrays;fill, offset 5

I/dalvikvm( 5178): ++++++++++++++++++++++++++++++++++++++++++++

I/dalvikvm( 5178): JIT_INFO: ME Issues while compiling trace  Ljava/util/Arrays;fill, offset 5

I/dalvikvm( 5178):      The trace provoked a spill.

I/dalvikvm( 5178): Trying less registerization from 1 to 0

I/dalvikvm( 5178): Could not compile trace for Ljava/util/Arrays;fill, offset 7

I/dalvikvm( 5178): ++++++++++++++++++++++++++++++++++++++++++++

I/dalvikvm( 5178): JIT_INFO: ME Issues while compiling trace  Ljava/util/Arrays;fill, offset 7

I/dalvikvm( 5178):      The trace provoked a spill.

I/dalvikvm( 5178): Trying less registerization from 1 to 0

D/dalvikvm( 2233): GC_EXPLICIT freed 483K, 19% free 16193K/19752K, paused 3ms+3ms, total 87ms

D/dalvikvm( 5178): GC_CONCURRENT freed 2629K, 17% free 13938K/16648K, paused 2ms+3ms, total 25ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 7ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 3ms

W/dalvikvm( 5178): threadid=29: thread exiting with uncaught exception (group=0x58304120)

W/System.err( 5178): java.lang.IllegalStateException: Unable to get cameraZoom handle

W/System.err( 5178):    at com.google.android.apps.gmm.map.legacy.internal.vector.a.h.a(PG:152)

W/System.err( 5178):    at com.google.android.apps.gmm.aa.bi.a(PG:129)

W/System.err( 5178):    at com.google.android.apps.gmm.aa.w.a(PG:317)

W/System.err( 5178):    at com.google.android.apps.gmm.aa.t.a(PG:542)

W/System.err( 5178):    at com.google.android.apps.gmm.map.s.aq.a(PG:193)

W/System.err( 5178):    at com.google.android.apps.gmm.map.s.bb.a(PG:2163)

W/System.err( 5178):    at com.google.android.apps.gmm.aa.w.a(PG:401)

W/System.err( 5178):    at com.google.android.apps.gmm.map.s.af.onDrawFrame(PG:282)

W/System.err( 5178):    at com.google.android.apps.gmm.map.internal.vector.t.e(PG:1345)

W/System.err( 5178):    at com.google.android.apps.gmm.map.internal.vector.t.run(PG:1069)

E/AndroidRuntime( 5178): FATAL EXCEPTION: GLThread 230

E/AndroidRuntime( 5178): Process: com.google.android.apps.maps, PID: 5178

E/AndroidRuntime( 5178): java.lang.IllegalStateException: Unable to get cameraZoom handle

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.map.legacy.internal.vector.a.h.a(PG:152)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.aa.bi.a(PG:129)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.aa.w.a(PG:317)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.aa.t.a(PG:542)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.map.s.aq.a(PG:193)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.map.s.bb.a(PG:2163)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.aa.w.a(PG:401)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.map.s.af.onDrawFrame(PG:282)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.map.internal.vector.t.e(PG:1345)

E/AndroidRuntime( 5178):        at com.google.android.apps.gmm.map.internal.vector.t.run(PG:1069)

W/ActivityManager( 2233):   Force finishing activity com.google.android.apps.maps/com.google.android.maps.MapsActivity

W/SurfaceFlinger( 1894): captureScreen: error creating EGL fence: 0x3000

D/dalvikvm( 5178): GC_CONCURRENT freed 3137K, 18% free 14973K/18220K, paused 1ms+4ms, total 32ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 22ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 16ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 18ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 17ms

D/Sensors ( 2233): int sensors_poll_context_t::activate(int, int): disable sensor 5

D/gps_serial( 2233): serial_gps_stop: called

D/gps_serial( 2233): gps_state_stop: could not send CMD_STOP command: ret=-1: Bad file number

D/Sensors ( 2233): int sensors_poll_context_t::activate(int, int): disable sensor 4

D/Sensors ( 2233): >>magn_3d enabled: 0

E/Sensors ( 2233): Write Error /sys/bus/iio/devices/iio:device0/trigger/current_trigger:-1

I/GCoreUlr( 2352): Successfully inserted location

I/GCoreUlr( 2352): Not calling LocationReporter, hasMoved: false, elapsed millis: 1003982, request: Stationary(3600000)

I/dalvikvm( 5178): Total arena pages for JIT: 81

W/OpenGLRenderer( 2392): Failed to wait for the fence 0x300c

D/dalvikvm( 5178): GC_CONCURRENT freed 2587K, 14% free 16868K/19556K, paused 2ms+2ms, total 25ms

D/dalvikvm( 5178): WAIT_FOR_CONCURRENT_GC blocked 17ms

E/LocationReceiver( 3153): Received bad location: null

E/LocationReceiver( 3153): Received bad location: null

[XtraartX]

Unable to pass android logo boot after installing X-posed and activating framework, previously working fine at 4.4-r1, i need this to convert my internet network to wifi using fake wifi connection module

[cheatman]

Thanks for the update! I hope you get well soon.

I will test the image, see if the installer works and maybe update the magic stick so the community can play with it.

Best wishes and take care,
C.

[Krister Hallergard]

Had a quick look at 4.4-r3 http://youtu.be/zsLqq3cGV38 while awaiting the Lollipop version :) Written companion http://goo.gl/CbFGnQ

[Bernard]

On Sunday, July 19, 2015 at 5:07:19 AM UTC-7, XtraartX wrote:

Unable to pass android logo boot after installing X-posed and activating framework, previously working fine at 4.4-r1, i need this to convert my internet network to wifi using fake wifi connection module

1. Install Xposed framework. Do not reboot when it prompts you to. 

2. Open up terminal emulator, run command "echo 0x98 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset" without the quotes.

3. Re-install Xposed framework.

4. Reboot

[XtraartX]

Thank's a lot Bernard, it's working now

[Ankit Kharwade]

I'm running this iso in live mode and wifi unable to swtich on. Also there's sound. Any fix? 

[Umberto Ixxo]

[stavros daliakopoulos]

Hello all,
I have a small issue with virtualbox, although installation works, it does not install grub (it hangs) so I am not able to reboot into the installation.

[cartic....@gmail.com]

Gett well soon...

Downloaded the iso, tried it on Hyper-V. I am not able to see eth0 when using "netcfg" on "ip a", networking doesn't seem to work. I am running it on Hyper- with a Legacy network adapter.

I have also seen this issue with recent builds on kitkat-x86.

Thanks

Karthik

[danieljoachims]

I will test it on Gigabyte S1082 Slate (Tablet) PC:

Here are links to a german mirror.

Android x86-4.4-R3.img:
http://cloud.daniel-joachims.de/index.php/s/zwI7E9GpAlOVSZY

Android x86-4.4-R3.iso:
http://cloud.daniel-joachims.de/index.php/s/zXTrINLzW7hP7sq

[Yuri Tsaregorodtsev]

4.4-r3 doesnt work at all, neither compiled version from source,
tried on different environments (vmware, qemu, physical device).
android gui wont start at all in console hundreds messages of init: untracked pid exited, etc.
nothing special.

any ideas???

[Carlos Felipe Araújo]

hi everyone, I use Android-x86 since r1 version and now I've got some issues, problems:

- formerly I installed the Windows 7, after Ubuntu (dual boot) and Android-x86 ON Linux partition created by Ubuntu and voila, I had Windows and Android-x86.

Now, I did the same but now Windows is corrupted, why??

[Chih-Wei Huang]

Due to a small bt issue reported by rbg and Saipudin,
I rebuilt and re-uploaded the images:

https://drive.google.com/file/d/0B5bbP1aYGPSTaVFhbGVabU1taTg/view?usp=sharing
https://drive.google.com/file/d/0B5bbP1aYGPSTbjRUVWtWNlVQbm8/view?usp=sharing

If you don't encounter Bluetooth issue,
no need to re-download the new image.
Sorry for the inconvenience.

[enso montana]

good afternoon friend again I downloaded the iso android-4.4-r3 her again install on a acer aspire 5253 laptop and my problem is that I wifi card works, yet still light on indicating that the card is on but within systems did not detect networks

--
You received this message because you are subscribed to a topic in the Google Groups "Android-x86" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/android-x86/-gCC3wDNHj0/unsubscribe.
To unsubscribe from this group and all its topics, send an email to android-x86...@googlegroups.com.

[enso montana]

[tdarren]

Okay closer now,

On the Linx 10 Baytrail (very similar to T100) we have the following working:

Linx 10 information (click here)

• Touchscreen (100% works)
• Wifi (100% works)
• Brightness slider (100% works)
• Accelerometer (auto rotation) (50% works, appears to be upside down, more about this in a moment)
• Volume buttons (100% works)
• Windows logo button (acts as home button)
• USB port (100% works)

Not working:

• Bluetooth (doesn't even enable)
• Power button (completely unrecognised)
• Battery (unrecognised), says charged all the time.
• Sound through speakers/headphone port.

Now I believe the problem with the accelerometer is fixed in windows via a registry tweak by default. This registry tweak essentially just rotates the screen an extra 180° to make the screen show the right way up. 

I was able to get sound working by plugging in my USB audio device but not through the headphone port or through the speakers unfortunately.

Also there's a red LED that shows up when the tablet is booting up and goes off when it gets the Windows OS, in android-x86, it just stays on.

What can I do to help fix these issues for Linx 10? Any debugging I could provide, I'm happy to do this.

On Friday, July 17, 2015 at 11:44:02 AM UTC+1, Chih-Wei Huang wrote:

Hi all,
A bad news to me was I sprained my ankle.
So I took two days sick leave.
A good news is I had time to clean up
all tasks in my todo list of kitkat-x86 to
release the 4.4-r3:

http://www.android-x86.org/releases/releasenote-4-4-r3

However, since the SourceForge is down now,
I uploaded the two files to Google Drive:

https://drive.google.com/file/d/0B5bbP1aYGPSTU05Sb2I0NWwxaEk/view?usp=sharing
https://drive.google.com/file/d/0B5bbP1aYGPSTS2o2b2l6Ul9XME0/view?usp=sharing

I'm excited about the release since
there are many big improvements in it.
For example, android-x86-4.4-r3.img could be
booted and installed to ASUS T100
and almost everything works (except the camera).

Enjoy it!

[Greg McGee]

Google drive seems to have a download limit, anyone have a torrent going of the iso?

I'll take another pass at building it but the builds are cratering due to warnings treated as errors in the wifi modules last i cheked.

[crajohns6965]

Everything seems pretty good on my T100 - only real thing I've noticed is that the speaker doesn't mute when you plug in the headphones. Anyone experienced this or know how to fix?

Looking forward to the camera - has anyone managed to integrate the 4.1 kernel? (https://github.com/maurossi/linux)

[Apri yan]

Hello All,

I finally managed to install the 4.4-r3 release on my asus 1215B using dual boot with windows 7 now.

but i still have some problems here,

the wifi and bluetooth couldnt be turned on.

also cant use the huawei 3g modem.

and how to mount the windows ntfs partition so i can read and write from within android?

can anyone please give some directions ?

thanks and regards

apri

[Apri yan]

hi, 

have you manage to activate wifi?

im having the same problem, cant activate wifi and bluetooth.

i installed in pc together with windows.

[Greg McGee]

Everything works on a Lenovo X200T with Wacom pen.
(Wifi/BT/camera/sound/pen after calibration run)

Still seeing some random text corruption on the desktop and in some apps, but it comes and goes.
Have tried forcing HW accel, not sure if it made much difference.
Is fully usable.

Hope you are feeling better soon!

[Onra Rehbends]

Am 31.07.2015 um 11:45 schrieb Greg McGee:

Hi!

> Everything works on a Lenovo X200T with Wacom pen.
> (Wifi/BT/camera/sound/pen after calibration run)

Which driver do you use? wacom-input or inputattach?

On my x201t only the touch is working, not the pen.

[Greg McGee]

I didn't have to do anything, it just worked out of the box, using the original posted iso of R3.

Pen didn't activate until I ran the calibration app though.

I'll have to poke around in the init to sort which driver was used, inputattach should support pen and touch, not sure about wacom-input.

[Greg McGee]

/system/etc/init.sh loads inputattach for the X200.

You can easily change that to try wacom-input.

I don't have the pen+TS to test, just the pen.

It may need some additional prodding for the pen and TS to be picked up, haven't found what args are used yet.

[VC]

Hi, Have a lenovo i5 5200 processor and virtualbox. The R3 iso image does not seem to boot. Never gets to the create partition screen - keeps coming up with invalid ops smp error. Any ideas what I should be looking at?

[Chih-Wei Huang]

2015-07-20 16:59 GMT+08:00 Chih-Wei Huang <cwh...@android-x86.org>:
> Due to a small bt issue reported by rbg and Saipudin,
> I rebuilt and re-uploaded the images:
>
> https://drive.google.com/file/d/0B5bbP1aYGPSTaVFhbGVabU1taTg/view?usp=sharing
> https://drive.google.com/file/d/0B5bbP1aYGPSTbjRUVWtWNlVQbm8/view?usp=sharing

Thanks to the SourceForge download service is back.
I've uploaded the images to SourceForge.

The Google Drive shared will be removed later.

[Dejay Nickerous]

I have the same issues. (Lenovo MIIX 2 8)

After having successfully booting with WiFi Working, I was really excited.

But after rebooting/shutdown the system, it no longer boots... goes to blank screen and flickers a few times.... i'm speculating that its something to do with the Video Drivers?

Remaking the USB bootable key, boots again, but WiFi doesn't work anymore...

Hoping the next version will fix this issue.

On Saturday, July 18, 2015 at 10:29:56 AM UTC-4, Vaidotas wrote:

Lenovo Miix 2 8 tablet. Just updated BIOS to latest version 1.10 (90CN27WW) .

There's still issues with video not working. Booted up successfully only from second time, on DEBUG mode. I think this tablet might be cursed - something is very wrong with video.

What is working (when video actually works):
+ video acceleration
+ WiFi
+ sound
+ power button
+ home button
+ youtube plays videos with sound
+ display brightness
+ poweroff

Doesn't work:
- bluetooth
- volume buttons
- microphone
- autorotate
- battery status display

On Friday, July 17, 2015 at 1:44:02 PM UTC+3, Chih-Wei Huang wrote:

Hi all,
A bad news to me was I sprained my ankle.
So I took two days sick leave.
A good news is I had time to clean up
all tasks in my todo list of kitkat-x86 to
release the 4.4-r3:

http://www.android-x86.org/releases/releasenote-4-4-r3

However, since the SourceForge is down now,
I uploaded the two files to Google Drive:

https://drive.google.com/file/d/0B5bbP1aYGPSTU05Sb2I0NWwxaEk/view?usp=sharing
https://drive.google.com/file/d/0B5bbP1aYGPSTS2o2b2l6Ul9XME0/view?usp=sharing

I'm excited about the release since
there are many big improvements in it.
For example, android-x86-4.4-r3.img could be
booted and installed to ASUS T100
and almost everything works (except the camera).

Enjoy it!

[Povilas Staniulis]

Backlight isn't fully turning off on my T100TA in sleep mode, can still be seen in a dark place.

A kernel issue perhaps ?

[周铄]

Could anybody provide me a copy of .config file for kernel compiling?
my email : zs836...@hotmail.com

[Testing Master]

I Have tried to install this img file in my device

Intel NUC :http://www.intel.com/content/www/us/en/nuc/nuc-board-dn2820fykh.html
But After installing on device stuck at android startup screen

i want to know that whether this Android rom is not supported with NUC or any other issue with this release

[Vaidotas]

This is more likely issue with hardware, or requires very specific kernel settings/driver. I'm was trying to get Android-x86 running on Lenovo Miix 2 8 for more that a year now. Ended up buying cheap Android tablet instead.

[Povilas Staniulis]

It's just bad luck I guess.

Bay Trail Linux support is still rather buggy. While the drivers work just fine on some devices (like the Asus T100TA), they are buggy on others. But it's getting better with every new kernel version.

I recommend taking a look here from time to time, maybe newer kernels will have better support for your device.

[Umberto Ixxo]

please include file mkshrc in system/etc/

thanks great job

[Chih-Wei Huang]

2015-08-06 3:21 GMT+08:00 Umberto Ixxo <sfuma...@gmail.com>:
> please include file mkshrc in system/etc/

It is included.

> thanks great job

[Karol Putra]

The backlight is not being turned off after pressing power button. It only dims. I know this has been reported already here, but has anyone found a solution?

W dniu piątek, 17 lipca 2015 12:44:02 UTC+2 użytkownik Chih-Wei Huang napisał:

Hi all,
A bad news to me was I sprained my ankle.
So I took two days sick leave.
A good news is I had time to clean up
all tasks in my todo list of kitkat-x86 to
release the 4.4-r3:

http://www.android-x86.org/releases/releasenote-4-4-r3

However, since the SourceForge is down now,
I uploaded the two files to Google Drive:

https://drive.google.com/file/d/0B5bbP1aYGPSTU05Sb2I0NWwxaEk/view?usp=sharing
https://drive.google.com/file/d/0B5bbP1aYGPSTS2o2b2l6Ul9XME0/view?usp=sharing

I'm excited about the release since
there are many big improvements in it.
For example, android-x86-4.4-r3.img could be
booted and installed to ASUS T100
and almost everything works (except the camera).

Enjoy it!