Re: 4.0-RC1Tegav2 (Atom N455 tablet)

[Khanh Nguyen Le Quoc]

Same me, the touch screen does not work on eeepc and assus build (wifi working) but the touch screen work well in tegav2 build (also wifi not work).
I tested amd_brazos build, the touch screen and wifi working but graphid card not support, can't see movies in youtube ...
My table is:

Onkyo TW117A6PH Tablet Specs

• Powered by a 1.66GHz Intel Atom N450 processor
• Running on Windows 7 Professional OS
• 2GB of RAM, and a 160GB hard drive
• 10.1-inch touchscreen display with 1024 x 600 pixels resolution
• Wi-Fi 802.11b/g/n, and Bluetooth 2.1 + EDR
• SD card reader, and 1.3 megapixel camera
• Two USB 2.0 ports
• Battery delivers up to 3.5 hours of run time
• Dimensions: 263 x 168 x 18.5 mm with weighs 990 gram

Please help me build file .iso and add touch screen driver from tegav2 build to eeepc build.
Thanks

On Thursday, 15 March 2012 22:34:17 UTC+7, Alteran wrote:

I have atom N455 tablet and everything works but the wifi. I found the
android-x86-4.0-RC1-tegav2.iso works best on my tablet, all but wifi.
 I tried the android-x86-4.0-RC1-asus_laptop.iso as well. however the
touch screen does not work but the wifi does.
Is there a way to compile and add the wifi to the tegrav2 build?
Could I use kitchen to do this? or use a adb type connection to
transfer to the device?

thanks

[Alteran]

I am looking for the same thing. I have a jumper JK01-TT

• Powered by a 1.66GHz Intel Atom N455 processor
• Running on Windows 8
• 2GB of RAM, and a 32GB mini pci-e hard drive

• 10.1-inch touchscreen display with 1024 x 600 pixels resolution
• Wi-Fi 802.11b/g/n, and Bluetooth 2.1 + EDR

• SD card reader, and 1.2 megapixel camera
• Two USB 2.0 ports
• HDMI, VGA, Network wire connection.

I use kitchen for my atrix roms, but it does not work the same way for the x86 iso. On my extra time I am looking in to how to edit.

So far most people don't give much info if you are New here. Kinda like the XDA forums. So I have to learn by reading every forum

[Alteran]

Yea I have noticed everything works on android-x86-4.0-RC1-eeepc.iso but the touch screen. I tried unpacking the img to add the wifi in to the android-x86-4.0-RC1-tegav2.iso. I keep running in to a error. I use Ubuntu 11.10 as a virtual machine. I read some where in a forum that kitchen could edit the img for x86, but I have not been able to do it. I know the one who did the realese Chih-Wei Huang can do it, but I have not seen any updates or anything. If I get this working or if some one could add the wifi driver in to the tegra version I could then host it on my website and link it up so others could benifit from it.

I have almost finished my port for my atrix. The only problems I am having with that port is the video drivers. trying to get the 2d working with out glitching is been a pain. I wish the code from nvidia was released lol

 

if anyone could help out with getting the wifi drivers from Eeepc to the tegra that would be so awesome. I will keep at it on the little free time I get! 

[Drury]

i have this one as well 

couple of other things i noticed

on tegav2 the camera fails when accessed from lock screen

and asus youtube doesnt work 

screen rotate doesnt work on either of them