WoodenHaptics users and developers

Contact owners and managers

1–12 of 12

Welcome to WoodenHaptics public mailing list!

Please ask your questions or share your experiences building with the WoodenHaptics starting kit. More information on www.woodenhaptics.org

0 selected

Blake Hament, Jonas Forsslund3

8/28/19

Cable Tips Tricks, Close-ups for C and C'

Good tip about the update rate, I did increase the rate already, that helped drastically. I

unread,

Cable Tips Tricks, Close-ups for C and C'

Good tip about the update rate, I did increase the rate already, that helped drastically. I

8/28/19

Blake Hament, Jonas Forsslund8

8/2/19

Hello World Programs (+ problem with Motor C Channel)

Yep! I had entered the wrong row from the spec sheet in the setup. The driver was limiting current to

unread,

Hello World Programs (+ problem with Motor C Channel)

Yep! I had entered the wrong row from the spec sheet in the setup. The driver was limiting current to

8/2/19

Blake Hament, Jonas Forsslund6

7/19/19

Enabling Motors // User 'Buttons'

Sorry for late response. My issue was that I was trying to setup the motor drivers with the encoders.

unread,

Enabling Motors // User 'Buttons'

Sorry for late response. My issue was that I was trying to setup the motor drivers with the encoders.

7/19/19

Blake Hament, Jonas Forsslund2

6/11/19

Motor Channel C - Possible PCB CAM Error

Hi, The pin that looks broken is the "enable" pin used by all three escons. When they are

unread,

Motor Channel C - Possible PCB CAM Error

Hi, The pin that looks broken is the "enable" pin used by all three escons. When they are

6/11/19

Blake Hament, Jonas Forsslund3

6/5/19

Linker Error

Of course! Thank you, that was exactly my problem. After changing the .pro file back to the original,

unread,

Linker Error

Of course! Thank you, that was exactly my problem. After changing the .pro file back to the original,

6/5/19

Blake Hament, Jonas Forsslund2

5/26/19

Up-to-date PC Specs

Hi Blake, Theoretically 32/64 bit and cpu should not matter since all is source-based (not sure about

unread,

Up-to-date PC Specs

Hi Blake, Theoretically 32/64 bit and cpu should not matter since all is source-based (not sure about

5/26/19

Blake Hament2

5/26/19

DXF or Illustrator Files for Electronics Housing Box

The files are in the electronics directory: https://github.com/WoodenHaptics/TEI_2015/tree/master/

unread,

DXF or Illustrator Files for Electronics Housing Box

The files are in the electronics directory: https://github.com/WoodenHaptics/TEI_2015/tree/master/

5/26/19

Blake Hament

5/17/19

Power Supply and DAQ for v1.7

I did not see specifics on power supply and DAQ for updated version 1.7, so I emailed Dr. Jonas

unread,

Power Supply and DAQ for v1.7

I did not see specifics on power supply and DAQ for updated version 1.7, so I emailed Dr. Jonas

5/17/19

tigerzin...@gmail.com

3/28/19

Looking towards the future, a career in haptics.

Hello everyone.. Right off the bat I know nothing about haptics, at least, the nit and grit of it.

unread,

Looking towards the future, a career in haptics.

Hello everyone.. Right off the bat I know nothing about haptics, at least, the nit and grit of it.

3/28/19

Jose Araujo, Jonas Forsslund8

10/23/18

Coordinate system issue?

They are not equivalent since they are not defining theta_c the same way. In first paper it is

unread,

Coordinate system issue?

They are not equivalent since they are not defining theta_c the same way. In first paper it is

10/23/18

Jonas Forsslund

1/17/17

Version 1.5 beta and instructions

Hello, I have been working on updating woodenhaptics kit in an attempt to make it more complete and

unread,

Version 1.5 beta and instructions

Hello, I have been working on updating woodenhaptics kit in an attempt to make it more complete and

1/17/17

Friedrich Kegel, Jonas Forsslund2

12/13/16

Current motor controllers

Hello Friedrich, Thanks for your interesting question, and sharing your cool projects with the group.

unread,

Current motor controllers

Hello Friedrich, Thanks for your interesting question, and sharing your cool projects with the group.

12/13/16