Groups
Groups
Sign in
Groups
Groups
weewx-user
Conversations
About
Send feedback
Help
weewx-user
1–30 of 10764
This is the place for support questions about installing and using
weewx
, the open-source weather software system.
Before you post, please see if you can find the answer to your question in the
documentation
, or in the
wiki
.
When you post a question, please remember to:
Post the relevant portion of the system log
The log is essential to diagnosing any problem.
It helps to turn on the "debug" flag (set
debug=1
in the configuration file
weewx.conf
), then run again.
Post the relevant portion of the weewx configuration file and/or skin configuration file;
Specify the type of weather station hardware you are using;
Tell us how you installed weewx.
For more information about what makes a good post, see the guidelines
Help! Posting to weewx user!
in the wiki.
There is a separate group,
weewx-development
, for developers who are actively working on extensions and the weewx codebase.
Please do not cross-post to both weewx-user and weewx-development!
Mark all as read
Report group
0 selected
Karen K
,
Sean Curry
2
5:49 PM
Example for the Almanac Extensions extending the Seasons Skin
Thanks again Karen for more ideas. I added Start and End Nautical and Astronomical Twilight to my
unread,
Example for the Almanac Extensions extending the Seasons Skin
Thanks again Karen for more ideas. I added Start and End Nautical and Astronomical Twilight to my
5:49 PM
Richard Whitcombe
,
Rainer Lang
2
5:34 PM
Ecowitt 2564 setup?
the GW1000 or the EcowittHttp driver won't work with a HP25x0 console. You can just continue with
unread,
Ecowitt 2564 setup?
the GW1000 or the EcowittHttp driver won't work with a HP25x0 console. You can just continue with
5:34 PM
neu...@bnjpro.dk
, …
John Smith
30
Dec 27
weewx can't update data from netatmo no more
Christmas is over, and what a lovely one it was. My mother in law normally gives "soft"
unread,
weewx can't update data from netatmo no more
Christmas is over, and what a lovely one it was. My mother in law normally gives "soft"
Dec 27
Karen K
,
michael.k...@gmx.at
2
Dec 27
LOOP Packet Augmentation with Almanac Data
Definitely a feature for upcoming versions of the bootstrap skin. Karen K schrieb am Samstag, 27.
unread,
LOOP Packet Augmentation with Almanac Data
Definitely a feature for upcoming versions of the bootstrap skin. Karen K schrieb am Samstag, 27.
Dec 27
Bob McNair
,
Karen K
2
Dec 26
WeeWX-ModbusTCP
Did you read these instructions: Help! Posting to weewx-user? I am afraid you provided too less data
unread,
WeeWX-ModbusTCP
Did you read these instructions: Help! Posting to weewx-user? I am afraid you provided too less data
Dec 26
vhel...@gmail.com
,
vince
3
Dec 26
Wlip-emulator for WeeWX
Thank you for PR Vince. New version uploaded, with history download and support for more weather
unread,
Wlip-emulator for WeeWX
Thank you for PR Vince. New version uploaded, with history download and support for more weather
Dec 26
Bob McNair
,
vince
3
Dec 26
Install fail.
Hi all, this can be closed. I did an install from a local .deb file and now have a working instance
unread,
Install fail.
Hi all, this can be closed. I did an install from a local .deb file and now have a working instance
Dec 26
Karen K
, …
Sean Curry
10
Dec 24
Skymap Almanac Extension
Sean Curry schrieb am Mittwoch, 24. Dezember 2025 um 17:49:16 UTC+1: I did have to add some
unread,
Skymap Almanac Extension
Sean Curry schrieb am Mittwoch, 24. Dezember 2025 um 17:49:16 UTC+1: I did have to add some
Dec 24
mike.t...@noworries.plus.com
,
vince
3
Dec 24
RPi4 on Buster & weewx 5.1 upgrade to Trixie & weewx 5.2
Many Thanks Vince. Good excuse to get another Pi and build it up in parallel On Tuesday, December 23,
unread,
RPi4 on Buster & weewx 5.1 upgrade to Trixie & weewx 5.2
Many Thanks Vince. Good excuse to get another Pi and build it up in parallel On Tuesday, December 23,
Dec 24
Stephen Thornber
,
vince
4
Dec 23
Where is the current WeatherFlowUDP driver for WeeWX 4.10.2 (Tempest / Python 3.11)?
Delete what you downloaded and altered and do it the weewx way. Use the extension installer. I'd
unread,
Where is the current WeatherFlowUDP driver for WeeWX 4.10.2 (Tempest / Python 3.11)?
Delete what you downloaded and altered and do it the weewx way. Use the extension installer. I'd
Dec 23
Sean Curry
,
Karen K
9
Dec 23
Problem Installing weewx-skymap-almanac
Success - thanks Karen, I appreciate your help. I didn't understand that I needed to install
unread,
Problem Installing weewx-skymap-almanac
Success - thanks Karen, I appreciate your help. I didn't understand that I needed to install
Dec 23
Peter Schmelitschek
2
Dec 23
Data import from WDisplay
I managed to find elsewhere, an import configuration file suitable for Version 5.1 The one I was
unread,
Data import from WDisplay
I managed to find elsewhere, an import configuration file suitable for Version 5.1 The one I was
Dec 23
Greg Troxel
,
vince
3
Dec 22
default value for WEEWX_ROOT: works for storing data, not for skin
vince <vince...@gmail.com> writes: > Your StdReport and DatabaseTypes sections use
unread,
default value for WEEWX_ROOT: works for storing data, not for skin
vince <vince...@gmail.com> writes: > Your StdReport and DatabaseTypes sections use
Dec 22
Christian Peters
, …
vince
12
Dec 22
try to swich weewx skin to blechertown 1.6 - errors with mysqldb
Yes....it helped a lot....! :-D Gosh...! :-D vince schrieb am Montag, 22. Dezember 2025 um 23:10:42
unread,
try to swich weewx skin to blechertown 1.6 - errors with mysqldb
Yes....it helped a lot....! :-D Gosh...! :-D vince schrieb am Montag, 22. Dezember 2025 um 23:10:42
Dec 22
O S
, …
vince
5
Dec 20
Stuck on Simulator and have empty queue.
If it works, I wouldn't change anything. My guess is you'll find that /data/report directory
unread,
Stuck on Simulator and have empty queue.
If it works, I wouldn't change anything. My guess is you'll find that /data/report directory
Dec 20
Bruce Balthaser
, …
Tom Keffer
4
Dec 19
WEEWX stopped posting to Wunderground and CWOP and can't reestablish
Good News! I'm back on line! Tried all three methods to clear the corrupt station memory on my
unread,
WEEWX stopped posting to Wunderground and CWOP and can't reestablish
Good News! I'm back on line! Tried all three methods to clear the corrupt station memory on my
Dec 19
Bruce Balthaser
Dec 18
WEEWX stopped posting to Wunderground or CWOP
I've been posting my weather data to Wunderground and CWOP for over a year until December 14 when
unread,
WEEWX stopped posting to Wunderground or CWOP
I've been posting my weather data to Wunderground and CWOP for over a year until December 14 when
Dec 18
Mario Wesolek
,
Karen K
2
Dec 15
weewx-dwd bioweather with weewx-wdc skin
You will have to set horizontal_table_classes and horizontal_main_effect_td_classes to something
unread,
weewx-dwd bioweather with weewx-wdc skin
You will have to set horizontal_table_classes and horizontal_main_effect_td_classes to something
Dec 15
Stefan Heidrich
,
michael.k...@gmx.at
3
Dec 14
Nach Import NOAA updaten
Dankeschön, hat funktioniert. Das ist ja einfach ;-) michael.k...@gmx.at schrieb am Sonntag, 14.
unread,
Nach Import NOAA updaten
Dankeschön, hat funktioniert. Das ist ja einfach ;-) michael.k...@gmx.at schrieb am Sonntag, 14.
Dec 14
Stefan Heidrich
Dec 14
Aktualisierung NOAA nach Datenimport
Hallo, ich habe Daten der alten Wetterstation in Weewx importiert - soweit so gut. Was muss ich tun
unread,
Aktualisierung NOAA nach Datenimport
Hallo, ich habe Daten der alten Wetterstation in Weewx importiert - soweit so gut. Was muss ich tun
Dec 14
John Steggall
,
vince
4
Dec 13
Rsyslog followup -- apparmor problem
My experience with selinux (similar though different) is that it freaked out when I symlinked things
unread,
Rsyslog followup -- apparmor problem
My experience with selinux (similar though different) is that it freaked out when I symlinked things
Dec 13
F Y
, …
vince
20
Dec 13
FTP fails connection in weewx, but works with manual connection
THAT was the answer!! Copying over the authentication key and writing the config file solved the
unread,
FTP fails connection in weewx, but works with manual connection
THAT was the answer!! Copying over the authentication key and writing the config file solved the
Dec 13
didier....@gmail.com
, …
paul.ba...@gmail.com
7
Dec 12
MYSQL database modification
Helo, You can also use dbeaver (or dbeaver-ce) . It is also free for non commercial use. I find it
unread,
MYSQL database modification
Helo, You can also use dbeaver (or dbeaver-ce) . It is also free for non commercial use. I find it
Dec 12
Pete Geenhuizen
, …
vince
18
Dec 12
Belchertown v1.6 error
Vince, Thanks for your help patience and suggestions they all worked and it's now updating and
unread,
Belchertown v1.6 error
Vince, Thanks for your help patience and suggestions they all worked and it's now updating and
Dec 12
James J Dempsey
, …
p q
24
Dec 12
Switched acurite to new Pi 5, doesn't seem to find station
My solution to this was to change from Raspberry Pi OS to Ubuntu 25.04. Things worked fine for
unread,
Switched acurite to new Pi 5, doesn't seem to find station
My solution to this was to change from Raspberry Pi OS to Ubuntu 25.04. Things worked fine for
Dec 12
Eugen Ledergerber
Dec 12
Dynamic Foldername in HTML Output
I would like to save all daily files that are prepared in JSON format in the HTML root in a folder
unread,
Dynamic Foldername in HTML Output
I would like to save all daily files that are prepared in JSON format in the HTML root in a folder
Dec 12
Karen K
Dec 11
Parallactic Angle
There is an undocumented feature in PyEphem: the calculation of the parallactic angle of a heavenly
unread,
Parallactic Angle
There is an undocumented feature in PyEphem: the calculation of the parallactic angle of a heavenly
Dec 11
JohnP
,
michael.k...@gmx.at
7
Dec 10
Highest daily rainfall issue
Thank you so much Michael - this worked perfectly. On Wednesday, 10 December 2025 at 10:53:53 UTC
unread,
Highest daily rainfall issue
Thank you so much Michael - this worked perfectly. On Wednesday, 10 December 2025 at 10:53:53 UTC
Dec 10
Graham Eddy
, …
Luc Heijst
8
Dec 9
rtsdavis - AU freq?
i had high levels of packet loss, to the point where i abandoned experiments with rtldavis. i blamed
unread,
rtsdavis - AU freq?
i had high levels of packet loss, to the point where i abandoned experiments with rtldavis. i blamed
Dec 9
Danny Ciarniello
, …
vince
16
Dec 9
rtldavis windspeed problem
I suppose it's possible that it's US/Metric conversion issues though, as far as I know, the
unread,
rtldavis windspeed problem
I suppose it's possible that it's US/Metric conversion issues though, as far as I know, the
Dec 9