TasmotaUsers

Contact owners and managers

1–30 of 3294

Hi! This is the discussion list for the users of Theo Arends fantastic Sonoff-MQTT-OTA-Arduino software. Please just in the conversation and ask as many questions as you like.

0 selected

Tam481, Philip Knowles2

Apr 16

Pairing Sonoff D1 Dimmer running Tasmota with RM443 remote

It should pair using the 'standard' Sonoff procedure in the manual From: sonoffusers@

unread,

Pairing Sonoff D1 Dimmer running Tasmota with RM443 remote

It should pair using the 'standard' Sonoff procedure in the manual From: sonoffusers@

Apr 16

R Casorso, Philip Knowles4

Apr 16

You can do that with Tasmocompiler - that's why I suggested it From: sonof...@googlegroups.com

unread,

You can do that with Tasmocompiler - that's why I suggested it From: sonof...@googlegroups.com

Apr 16

Dirk Eisner, … Philip Knowles7

Apr 16

Setting up SD card on ESP32S on Tasmota 13.4.0

Thanks Justin, that was the problem! I formatted the card in Linux and Windows and both failed. I

unread,

Setting up SD card on ESP32S on Tasmota 13.4.0

Thanks Justin, that was the problem! I formatted the card in Linux and Windows and both failed. I

Apr 16

Steve Trone, Philip Knowles3

Apr 4

TASMOTA wont connect to MQTT server error -5 &-2 - any ideas

Ok, nuked the house (power off for 10 min). On SONOFF - deleted user and pwd, save & reset - add

unread,

TASMOTA wont connect to MQTT server error -5 &-2 - any ideas

Ok, nuked the house (power off for 10 min). On SONOFF - deleted user and pwd, save & reset - add

Apr 4

joel gerardi, Philip Knowles4

Apr 3

Publishing an MQTT message

Well that appeared From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf

unread,

Publishing an MQTT message

Well that appeared From: sonof...@googlegroups.com <sonof...@googlegroups.com> on behalf

Apr 3

tien huynh, Philip Knowles2

Mar 30

I can't configure rf receiver, in config module there is no option rfrev

Which device are you trying to configure? What did you flash it with? Have you followed the

unread,

I can't configure rf receiver, in config module there is no option rfrev

Which device are you trying to configure? What did you flash it with? Have you followed the

Mar 30

Andrew Russell, Justin Adie12

Mar 29

Berry: mqtt.publish() %topic% ?

>> Perhaps you have something that is overriding the mqttlog level? Yes, I was wondering about

unread,

Berry: mqtt.publish() %topic% ?

>> Perhaps you have something that is overriding the mqttlog level? Yes, I was wondering about

Mar 29

praba karan, … Justin Adie4

Mar 29

How to sync time without internet

Should there not be an “endon” at the end of the first backlog in rule1 and the first trigger of

unread,

How to sync time without internet

Should there not be an “endon” at the end of the first backlog in rule1 and the first trigger of

Mar 29

praba karan, … Philip Knowles16

Mar 26

SONOFF POW R2 -- Current Parameter

I only did that so you could compare your original rule (using mem) with one using var. Use the

unread,

SONOFF POW R2 -- Current Parameter

I only did that so you could compare your original rule (using mem) with one using var. Use the

Mar 26

Daniel S, Philip Knowles2

Mar 23

DS18Alias: Command Unknown

To assign a static alias to a certain ID, you can use DS18Alias command. This must be enabled by

unread,

DS18Alias: Command Unknown

To assign a static alias to a certain ID, you can use DS18Alias command. This must be enabled by

Mar 23

Tu Ra, … Philip Knowles13

Mar 20

Tasmota 2 x 1-gang RF switch for stairs - how to synchronize over RF (without WiFI) for stairs?

I have 36 ZigBee devices from 10 different manufacturers covering sensors, switches, relays, PIRs and

unread,

Tasmota 2 x 1-gang RF switch for stairs - how to synchronize over RF (without WiFI) for stairs?

I have 36 ZigBee devices from 10 different manufacturers covering sensors, switches, relays, PIRs and

Mar 20

Eigeldinger Simon, … Philip Knowles5

Mar 14

Thermo/Hygrometer with Tasmota

Hi Phil, Thanks for the info. Will have a look into that. Greetings, Simon Von: Philip Knowles <

unread,

Thermo/Hygrometer with Tasmota

Hi Phil, Thanks for the info. Will have a look into that. Greetings, Simon Von: Philip Knowles <

Mar 14

macko003, … Philip Knowles18

Mar 13

sonoff t2 with sonoff 4ch

Great. There was a reason I suggested 'dummy' relays though. On a reboot Tasmota loses the

unread,

sonoff t2 with sonoff 4ch

Great. There was a reason I suggested 'dummy' relays though. On a reboot Tasmota loses the

Mar 13

Pila, … Philip Knowles7

Mar 11

Pow: how to reset TotalTariff?

If Justin's suggestion doesn't work then please raise an Issue. The developer says that the

unread,

Pow: how to reset TotalTariff?

If Justin's suggestion doesn't work then please raise an Issue. The developer says that the

Mar 11

Rod Nussbaumer, … Philip Knowles5

Mar 7

Trigger based on comparison of two variables

Just to clarify, Rules need a change in something to trigger - that's why var1#state is important

unread,

Trigger based on comparison of two variables

Just to clarify, Rules need a change in something to trigger - that's why var1#state is important

Mar 7

Laurentp, Justin Adie5

Mar 5

Problem with Sonoff ZBBridge Pro with original firmware.

Great, last question: how (syntax) do I back up original firmware (in improbable case Tasmota fails)

unread,

Problem with Sonoff ZBBridge Pro with original firmware.

Great, last question: how (syntax) do I back up original firmware (in improbable case Tasmota fails)

Mar 5

Adam Hiatt, … Justin Adie7

Feb 27

iFan04-L emulation as Hue bridge

Thanks for the link. I'll give it a read through and see what I can do. On Tue, Feb 27, 2024 at 2

unread,

iFan04-L emulation as Hue bridge

Thanks for the link. I'll give it a read through and see what I can do. On Tue, Feb 27, 2024 at 2

Feb 27

Adam Hiatt, … Justin Adie8

Feb 27

OTA Flash iFan04-L

I'm a bit late on the responding. I ended up ordering the USB C to FTDI device and had no issues

unread,

OTA Flash iFan04-L

I'm a bit late on the responding. I ended up ordering the USB C to FTDI device and had no issues

Feb 27

M Tobien, … Andrew L9

Feb 26

ts1(8000) creates a 8 second timer, >ti1 is the script section that is executed when that timer

unread,

ts1(8000) creates a 8 second timer, >ti1 is the script section that is executed when that timer

Feb 26

Dirk Eisner, … Philip Knowles4

Feb 25

Support for Hardware watch-dog

The simple answer is no because, if the ESP has gone into a boot loop, Tasmota might have wiped its

unread,

Support for Hardware watch-dog

The simple answer is no because, if the ESP has gone into a boot loop, Tasmota might have wiped its

Feb 25

Pila, Philip Knowles3

Feb 25

Zigbee Thermostatic valve on Tasmota flashed Sonoff ZbBridge

Thanks, you have made excellent points! Likely solved all my misdirection! From your description, you

unread,

Zigbee Thermostatic valve on Tasmota flashed Sonoff ZbBridge

Thanks, you have made excellent points! Likely solved all my misdirection! From your description, you

Feb 25

Justin Adie, … Andrew L6

Feb 20

Zigbee, Hue Emulation and rules

Yes. This kind of thing is what I meant by available workarounds. But I was looking for a native

unread,

Zigbee, Hue Emulation and rules

Yes. This kind of thing is what I meant by available workarounds. But I was looking for a native

Feb 20

Alberto P, … Philip Knowles11

Feb 17

make alexa speak a vocal announce in a Tasmota Rule

You do know what the M in Tasmota stands for? MQTT. The whole point was to uncouple Sonoff devices

unread,

make alexa speak a vocal announce in a Tasmota Rule

You do know what the M in Tasmota stands for? MQTT. The whole point was to uncouple Sonoff devices

Feb 17

SALVATORE MANZO, … Philip Knowles5

Feb 9

Non so come fare chiedo aiuto

Typo publish cmnd/<grouptopic>/backlog0 powerstate 0; so63 1 From: 'Justin Adie' via

unread,

Non so come fare chiedo aiuto

Typo publish cmnd/<grouptopic>/backlog0 powerstate 0; so63 1 From: 'Justin Adie' via

Feb 9

Eric Koester, … NA21

Feb 7

need help with a Ping rule - pinging 2 devices

A good way to learn and get help is also using ChatGPT https://openai.com/chatgpt , just an example:

unread,

need help with a Ping rule - pinging 2 devices

A good way to learn and get help is also using ChatGPT https://openai.com/chatgpt , just an example:

Feb 7

NA, Philip Knowles5

Feb 5

Delock 11828 restarts, loses wifi, resets when power toggle on/off

It depends on the capability of the port many can only supply 5W - with the device taking 1W and a

unread,

Delock 11828 restarts, loses wifi, resets when power toggle on/off

It depends on the capability of the port many can only supply 5W - with the device taking 1W and a

Feb 5

NA, … Justin Adie37

Feb 3

Out of the box easy to use Tasmota Wifi to serial sensor board

Thank you all again very much for the help, I was able to do what I wanted to do with these 2 rules:

unread,

Out of the box easy to use Tasmota Wifi to serial sensor board

Thank you all again very much for the help, I was able to do what I wanted to do with these 2 rules:

Feb 3

jakp...@gmail.com, Philip Knowles3

Feb 2

Remove "ON"/"OFF" states from Webinterface.

Hi Phil, using webcolor1 is a great idea and did the trick. At first I thought that this would affect

unread,

Remove "ON"/"OFF" states from Webinterface.

Hi Phil, using webcolor1 is a great idea and did the trick. At first I thought that this would affect

Feb 2

Dirk Eisner, … Justin Adie6

Jan 31

MQTT to SMS Gateway, any suggestion?

Thanks for all your suggestions, yes all of your answers and comments are right on the money. I

unread,

MQTT to SMS Gateway, any suggestion?

Thanks for all your suggestions, yes all of your answers and comments are right on the money. I

Jan 31

Jean-Christophe, Philip Knowles2

Jan 28

Compact DIN module

There's a few ZigBee DIN rail breakers which might be a better way to go. The Develco one would

unread,

Compact DIN module

There's a few ZigBee DIN rail breakers which might be a better way to go. The Develco one would

Jan 28

Search

Clear search

Close search

Google apps

Main menu