OpenBFB

オーナーとマネージャーに問い合わせる

1–20 / 20 件

This group was created after the announcement in march 2013 that 3D Systems, owner of Bits from Bytes, would be discontinuing the BFB line of printers: Rapman, BFB3000 and 3DTouch.

official announcement:

On April 1, 2013 we will be discontinuing the 3D Touch and Rapman and integrating our website and social channels with 3D Systems. Both printers will continue to be fully supported with more information to come. Please join us on our 3D Systems social channels and 3D Systems consumer community, Cubify. On Cubify you'll be able to share in the marketplace, play with new apps and design tools, turn your models into apps, and monetize a 3D business

0 行を選択中

Unfold さんのプロフィール写真

2023/12/06

Hi all, I noticed an uptick in spam content lately on this group so I locked it down a bit to prevent

未読、

Hi all, I noticed an uptick in spam content lately on this group so I locked it down a bit to prevent

2023/12/06

asle erling borgen さんのプロフィール写真

asle erling borgen

2019/09/02

Remove and replace extruders

Hi, new member; Asle from Norway. I have an old BFB3000+ with dual extruders, and a couple of years

未読、

Remove and replace extruders

Hi, new member; Asle from Norway. I have an old BFB3000+ with dual extruders, and a couple of years

2019/09/02

SURFARAZ さんのプロフィール写真

SURFARAZ, Unfold8

2019/08/31

BFB 3000 dual extruder stuck on bootloader mode

Hello Dries, After much deliberation and troubleshooting, the printer finally rebooted. Although it

未読、

BFB 3000 dual extruder stuck on bootloader mode

Hello Dries, After much deliberation and troubleshooting, the printer finally rebooted. Although it

2019/08/31

Ralph Loveday さんのプロフィール写真

Ralph Loveday, … SURFARAZ43

2019/08/20

Rapman 3.1 upgrade electronics

Please check the image attached. This is so confusing. The connection sequence followed ( Blue, Red,

未読、

Rapman 3.1 upgrade electronics

Please check the image attached. This is so confusing. The connection sequence followed ( Blue, Red,

2019/08/20

maurilomb さんのプロフィール写真

2019/03/10

OLED spare part number

in case anyone would need to replace their Rapman OLED screen, its part number is TOSD-2864OGMBAF01

未読、

OLED spare part number

in case anyone would need to replace their Rapman OLED screen, its part number is TOSD-2864OGMBAF01

2019/03/10

Andu mtb さんのプロフィール写真

2017/04/29

i need a thermistor of 200k ohm

Plese help me, i need a thermistor 200k ohm for my bfb rapman 3.1 extruder ... i found somethin on

未読、

i need a thermistor of 200k ohm

Plese help me, i need a thermistor 200k ohm for my bfb rapman 3.1 extruder ... i found somethin on

2017/04/29

Alfred Valk さんのプロフィール写真

Alfred Valk, Unfold3

2014/11/28

Poging: Rapman met Gen6 deluxe

Hello People, I 've decided to give back life to my Rapman after a big pause. Bought it a long

未読、

Poging: Rapman met Gen6 deluxe

Hello People, I 've decided to give back life to my Rapman after a big pause. Bought it a long

2014/11/28

Stephen Donchez さんのプロフィール写真

Stephen Donchez, … Alfred Valk4

2014/11/23

Cannot Access Bootloader

Hi Stephen, if i am correct you can use a PIC toolkit to write the firmware back to the chip. You

未読、

Cannot Access Bootloader

Hi Stephen, if i am correct you can use a PIC toolkit to write the firmware back to the chip. You

2014/11/23

Matthew Jones さんのプロフィール写真

Matthew Jones, Unfold2

2014/11/11

BFB3000 Hot End Repair

The BFB3000 hotend should be virtually the same as the DIY Rapman hotend, so you could go and check

未読、

BFB3000 Hot End Repair

The BFB3000 hotend should be virtually the same as the DIY Rapman hotend, so you could go and check

2014/11/11

Cornelius Rheeders さんのプロフィール写真

Cornelius Rheeders, Unfold2

2014/10/23

Cornelius, Welcome to the club! Funny to hear the sentence "new to the bfb machines" as

未読、

Cornelius, Welcome to the club! Funny to hear the sentence "new to the bfb machines" as

2014/10/23

adampres...@gmail.com さんのプロフィール写真

adampres...@gmail.com, Unfold2

2014/10/04

BFB 3000 - Hot End Coating Wear/Damage

This is insulation so the hot end heats up quicker but also for safety reasons so if you touch it

未読、

BFB 3000 - Hot End Coating Wear/Damage

This is insulation so the hot end heats up quicker but also for safety reasons so if you touch it

2014/10/04

Unfold さんのプロフィール写真

2014/09/14

Rapman 3d model

Hi all, the 3d model of the entire Rapman that I posted in a thread before has found a new home on

未読、

Rapman 3d model

Hi all, the 3d model of the entire Rapman that I posted in a thread before has found a new home on

2014/09/14

Dan Volpe さんのプロフィール写真

Dan Volpe, … Unfold4

2014/08/28

3D Touch Z axis calibration troubles

thanks for sharing! Those rare issues can be a pain to solve.

未読、

3D Touch Z axis calibration troubles

thanks for sharing! Those rare issues can be a pain to solve.

2014/08/28

bob cousins さんのプロフィール写真

bob cousins, Unfold7

2014/06/23

"Getting the band back together"

未読、

"Getting the band back together"

2014/06/23

Unfold さんのプロフィール写真

2014/04/06

RapMan experimental extruder with linear stepper, how to adjust the PCB?

Hi all, I have a question in regards to hooking up a linear actuator stepper to the Rapman. I'm

未読、

RapMan experimental extruder with linear stepper, how to adjust the PCB?

Hi all, I have a question in regards to hooking up a linear actuator stepper to the Rapman. I'm

2014/04/06

Unfold さんのプロフィール写真

Unfold, … Yahya Ahmed32

2014/02/10

BFB discontinuing its whole line of machines. And now?

Anar, can I get 1.6mm Fibreglass GRP sheet instead of FR4 epoxy sheet. The seller said “It meets all

未読、

BFB discontinuing its whole line of machines. And now?

Anar, can I get 1.6mm Fibreglass GRP sheet instead of FR4 epoxy sheet. The seller said “It meets all

2014/02/10

Dylan van den Bosch さんのプロフィール写真

Dylan van den Bosch, Unfold4

2013/11/04

Firmware/Repetier Calibration for Opened BFB

One of those very few bits of relevant information you can actually still find through the official

未読、

Firmware/Repetier Calibration for Opened BFB

One of those very few bits of relevant information you can actually still find through the official

2013/11/04

kdipo...@gmail.com さんのプロフィール写真

kdipo...@gmail.com

2013/10/01

Filament for BFB machines, Great deals to be had on 3 mm filaments in PLA & ABS for BFB machines, bulk options available or single reels.

KDI Polymers has stock of BFB filament spools for sale at discount prices, available as single reels

未読、

Filament for BFB machines, Great deals to be had on 3 mm filaments in PLA & ABS for BFB machines, bulk options available or single reels.

KDI Polymers has stock of BFB filament spools for sale at discount prices, available as single reels

2013/10/01

Jason Miles さんのプロフィール写真

2013/05/14

Controlling heated bed with Rapman 3.1 Electronics

As with many other BFB printer users, I think my main issue with my Rapman 3.1 stems from warping due

未読、

Controlling heated bed with Rapman 3.1 Electronics

As with many other BFB printer users, I think my main issue with my Rapman 3.1 stems from warping due

2013/05/14

Unfold さんのプロフィール写真

2013/04/29

Rapman transportation crate

If anyone has a need for this in the future, Ed from BFB ones gave me these files for a laser cut

未読、

Rapman transportation crate

If anyone has a need for this in the future, Ed from BFB ones gave me these files for a laser cut

2013/04/29

検索

検索をクリア

検索を終了

Google アプリ

メインメニュー