ioio-users

Bit banging is not something that is typically possible with the IOIO. Implement general purpose

In addition to the usually friendly, usually correct, and usually prompt advice you get here are the

Hi team, I developed a project with IOIO v1, but now, after about 20years!!! the board finish its

I'm a electrical engineering student and I have to write the IOIO-code on my PIC24FJ256GB206. I

No, that is not possible with the current design. On Fri, Jun 16, 2023 at 8:50 AM Adir Krafman <

Is it possible to port at least some IOIO functionality (I2C/SPI) to Arduino/Digispark/Raspberry Pi

Hi all , just got the IOIO OTG, looks like a fun device, I'm having issues with the board, before

Hi, @all. More than 10 years ago, I've buyed an IOIOBoard and develop an home allarm with this

Hello everyone, I'm wondering if I can use a Rgb led Matrix with a simple ioio board (mint

They are running 2015 firmware, if it matters. On Saturday, December 12, 2020 at 1:04:48 PM UTC-5

I recently bought an IOIO-OTG from Sparkfun and I'm having trouble getting it to work. I can see

I have loved the IOIO product line since the first one was released. I have not found any other board

Hi, I'm really curious to know if the IOIO OTG board could act as an intermediary between an

Hello. I wrote a code modifying HelloIOIO sample it works very well using usb bridge from android

That would involve rebuilding the firmware as the pin is hardcoded in it. On Thu, Apr 30, 2020, 09:46

I am attempting to using an IOIO-RTG board to control a MCP-4131 digital potentiometer via SPI. I

I haven't put a watchdog in the firmware. Shouldn't be hard to do for someone who knows what

All, we are having significant issues with USB, AOA, and BT with Android 6. We have been in

I have an old ioio which runs my app for more than 4 years, but now I have to upgrade the app. I'

Hi Ytai, Could you please look at https://stackoverflow.com/questions/55441037/android-cant-get-the-

Ytai, I was looking through the design files on github, and considering a possible project, and

You'd need to do something like this: https://github.com/ytai/ioio/blob/master/software/

New member.. IOIO OTG is working properly with direct Android - IOIO link I wouild like to use IOIO

Hi, I'm new using the IOIO Board, and it's the first time that I'm trying to make a

it is not fast enought to cath up, wha tricks can we pull On Tuesday, September 25, 2012 at 8:43:13

Do you want to send out a pull request? On Mon, Apr 23, 2018, 14:39 JP <jp.su...@gmail.com>

Hi, After upgrading my Nexus 4 to Android 5.x it will no longer connect to my IOIO OTG board using

Or you could just have the led driven by a circuit where the led is powered with logic low and

Hi there. I am trying to do something similar with the IOIO board and I followed your example. My

On Tuesday, November 14, 2017 at 4:03:42 AM UTC+5, Cesar Quiroz wrote: Hello everyone! When i try to

OK, I connected a push button switch between mclr and ground and it does the job after hitting it few

hi I try to play sound on counter finish final MediaPlayer mediaPlayer = MediaPlayer.create(this , R.