InMoov

I'm curious how you connected the servo motors, is there a diagram? I have 17 servo motors in my

did you solve your problem and made an articulated thumb with an extra servo? Il giorno giovedì 28

Uporabil sem to, deluje v redu. Univerzalni 5 ~ 6V / 3V ~ 24V servo krmilni stroj Reverzer Servo

did you make some progress since April? the sg90 have enough force? Did you find some video with paml

You may find the same issues with PCBway. They are based in China and subject to the same import

Correct, if you solder the 5V main bridge + the bridge you have circled, the PIR will receive a 5V

Hello, Which camera are you using? The recommended camera linked in the i2Head tutorial, normally

Hi, this is Alejandro from Spain. I published a github repository on an implementation of ROS2 on

Wow very impressive! Keep it up, body movements are on the way up. Gael Langevin Creator of InMoov

I'm 57 years old, single and grandma is making a robot! So proud of myself! want to share my

According to your explanations, the wormGears are too tight fitting in their sockets, and as a result

Hi guys i had a problem in connect to shafts to the eye socket so i did some modification 1) change

https://inmoov.fr/minmoov-64-reduced/ Le mercredi 25 juin 2025 à 13:16:38 UTC+2, gael langevin a

Hello, You need to invert the two power cables (Vcc and Gnd) connected on your potentiometer. Keep

Found ! Franz A schrieb am Sonntag, 22. Juni 2025 um 09:56:17 UTC+2: Where can i find the

Hoi, i saw the Pics and so far, i have understood and placed them correct :-) hair...@gmail.com

Finally it is installed! In most cases if you cannot upload the MRLComm.ino, you need to downgrade of

Dear Sir, I hope this email finds you well. I am writing to request an update on the robot's

Thank you all for your answers and advice I just started Monday, I printed 4 peaces a day, I think I

Hello, I am using Piper within myrobotlab. It's easy to do. Once piper is running on your OS, In

Hi, I am trying to merge some parts to make a single print and I can not manage to align both

Does anyone know of a camera that will fit in the new eyes without costing an extra $100 just for the

Hello, Some ribbon cables are softer and thinner than others. I noticed that rainbow colored ribbons

Hello and welcome, The eye camera currently used for the i2Eye module should be fine for your purpose

Hey everyone, I just started working on this amazing animatronic head project and am currently

The voice command OPEN YOUR RIGHT HAND, is located in resource/ProgramAB/en-US/aiml/_inmoovGestures.

Hello, You have read correctly, a breadboard is not intended for high current. Having 6 servos might

I'm working on the roll neck by using the master/slave configuration on the servos similar to the

Dans myrobotlab, il ya déjà une trentaine de gestuelles disponible via l'interface InMoov. En bas

Hi I try to debug the mrl using NetBeans in a wish to do some modifications. I download the git and