FIBRE door switch

4 views

Skip to first unread message

Craig E.L. Stark

unread,

Feb 5, 2019, 6:11:18 PM2/5/19

to Campus Center for Neuroimaging discussion

FIBRE Users,

FYI, for the door between the control room and the scan room to seal, both the scanner-side and control room-side switches must be up. If either of these is down, the seal won't inflate. Typically, there should be no reason to flip the scanner-side switch down as that should really only be used in an emergency (somebody inside the room needing to get out while the door is sealed).

So:

Try to not mess with the switch inside the scan room and leave it in the up position (now marked)
If the door won't seal, odds are the switch inside was flipped down