Composite API

[michael...@zodiac.com]

Hello -

I am attempting to embrace the new "Composite API" method for calling my own connector. However, I keep getting the error popup "Error testing the connector" when I launch a test.

The connector has been running fine for the past several months through an API listener so I don't expect that the problem is there. The connector is configured as shown in "GetEcrConfiguration Connector.jpg".

I've attached screen snaps of the Composite API configuration and design tabs ("GetEcrConfiguration Composite Config.jpq" and "GetEcrConfiguration Composite Design.jpg")

Thank you for any help.

Michael

[thoshino]

Hi Michael,

I see that you have "GET" configured for the Composite API configuration.

Can you change it to "POST", and set both "Accept media type" "Result media type" to application/json?

This is the format that API listener is expecting.

Please let me know if this solves your problem.

Best regards,

Taka

[Wagner, Michael]

Hello Taka -

Yes, that worked.  Thank you.

My connector doesn't return JSON so that is why I chose what I did.  But apparently your server post-processing what my connector sends back.

Thanks again.

Michael

--

MICHAEL WAGNER
PLM Systems Engineer
Zodiac Pool Systems, Inc.
2620 Commerce Way, Vista, CA 92081
michael...@zodiac.com
Ph 760-599-9600 x3087
Cell 760-473-8785