Using the rest module for Openmrs 1.8.0

[awanth sen]

Hi all,

We are using openmrs 1.8.0 WAR and we want to use the REST module. it has a module at the bottom in the module repo list which says the required openmrs version is 1.8.0. but when we try to use that with our openmrs war it gives a spring error which  have pasted here: http://pastebin.com/qKzhjVSL

could someone tell me whether RST could be used with 1.8.0 ? if not is there any way that we can perform REST full calling in 1.8.0 openmrs War? since we have many dependencies with 1.8.0 we are unable to upgrade our war

thanks
regards
Awanthika

[Jeremy Keiper]

The best way to know is to try it and see.

--
OpenMRS Developers: http://go.openmrs.org/dev
Post: d...@openmrs.org | Unsubscribe: dev+uns...@openmrs.org
Manage your OpenMRS subscriptions at https://id.openmrs.org/

[Jeremy Keiper]

... and I see that you already did that.  I'm not sure why you get that message,  but try turning off any other modules to see if there is a conflict.

[awanth sen]

Hi Jeremy,

We tried several ways but it doesnt work.. i think the module repo page should be changed to say it depends on 1.8.1 :) there is not much change from 1.8.0 to 1.8.1 it seems we upgraded to 1.8.1 and our other modules are working..

thanks..

regards
Awanthika

To unsubscribe from this group and stop receiving emails from it, send an email to dev+uns...@openmrs.org.

--

------------------------------------------------------------------------------------------->>

AWANTHIKA SENARATH

Undergraduate

Department of Electronics and Telecommunication Engineering

University of Moratuwa

[Jeremy Keiper]

Ah, I see.  We run 1.8.2 at Ampath and had no problem with it, so I did not see the problem.  You are right, it should indicate if that is the case (depending on 1.8.1 vs 1.8.0).

Jeremy Keiper
OpenMRS Core Developer
AMPATH / IU-Kenya Support

[Wyclif Luyima]

What version of the module are you running? You need to upgrade to 1.0+, this and above require 1.8.1

Wyclif

Wyclif Luyima
Regenstrief Institute Inc.

Confidentiality Notice: The contents of this message and any files transmitted with it may contain confidential and/or privileged information and are intended solely for the use of the named addressee(s). Additionally, the information contained herein may have been disclosed to you from medical records with confidentiality protected by federal and state laws. Federal regulations and State laws prohibit you from making further disclosure of such information without the specific written consent of the person to whom the information pertains or as otherwise permitted by such regulations. A general authorization for the release of medical or other information is not sufficient for this purpose.

If you have received this message in error, please notify the sender by return e-mail and delete the original message. Any retention, disclosure, copying, distribution or use of this information by anyone other than the intended recipient is strictly prohibited.

[awanth sen]

Hi Wyclif,

We tried to run 0.8.21639 against 1.8.0 as it was mentioned to be the required OMRS version in the module repo. but it needs 1.8.1 it seems. it doesnt work against 1.8.0.

Awanthika

[Wyclif Luyima]

Hi Awanthika,

And that is why i said you need to upgrade to 1.0+ of the module because it is where the required version was updated to 1.8.1.

Wyclif