[issue] Flow Rules not seen

[Sreelakshmi K S]

Hi,

By referring to this link https://docs.voltha.org/master/overview/operate.html, we have provisioned a subscriber, but the flow rules expected are not seen.

Has anyone encountered a similar problem recently? Kindly guide debugging and resolving this.

--

With Best Regards
Sreelakshmi K S
VVDN Technologies Pvt Ltd
Cell: +91 9605954691
Web: www.vvdntech.com

Disclaimer: © 2023 VVDN Technologies Pvt. Ltd. This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful.

[Mahir Gunyel]

Flows are generated by volt application and pushed to VOLTHA. I suggest checking ONOS logs. The log line " [Olt] Adding subscriber" is a good start.  If you can see that the flows are generated and pushed to VOLTHA, then the path will be checking rw-core logs and then the olt-adapter and onu-adapter. You can check the flows in onos cli with "flows -s" command and in voltctl with "voltctl device flows" command. 

--
You received this message because you are subscribed to the Google Groups "VOLTHA Discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to voltha-discus...@opencord.org.
To view this discussion on the web visit https://groups.google.com/a/opencord.org/d/msgid/voltha-discuss/CAHeb7SLkU3hgYDYLWmL77oBqYmy4HmyqN09YhPCQU77cCSgKPA%40mail.gmail.com.