hi stephen,
we have used the extron ones before
http://www.extron.com/product/product.aspx?id=usbextender though i think
for smart boards not capture agents. they are extremely expensive though...
thanks,
paul.
On 04/02/16 17:52, Stephen Marquard wrote:
> Hi Greg,
>
>
> We've used quite a few of these 10m or 20m active extenders that work fine:
>
>
>
http://www.unitek-products.com/en/product_detail.php?id=23
>
>
> but in some venues the installed conduits are such that only CAT5/6 is
> possible.
>
>
> Cheers
>
> Stephen
>
>
> ------------------------------------------------------------------------
> *From:* Greg Logan <
gregor...@gmail.com>
> *Sent:* 04 February 2016 07:44 PM
> *To:*
matterho...@opencast.org
> *Subject:* Re: [Matterhorn-Users] USB 2.0 extenders for Logitech webcams
>
> Hi Stephen,
>
> Back in the CA development days we had an active USB cable that I think
> we use for this purpose. I don't remember if it was that long, but it
> might have been close. Have you considered going that route? Or is the
> ethernet cabling a hard requirement?
>
> G
>
> On Feb 4, 2016 11:33 AM, "Stephen Marquard" <
stephen....@uct.ac.za
> <mailto:
stephen....@uct.ac.za>> wrote:
>
> Hi all,
>
>
> Does anyone have product recommendations for USB 2.0 extenders over
> CAT5/6 cable to use a Logitech C930 webcam a significant distance
> away from a Capture Agent (e.g. around 40m)?
>
>
> We have tested the Unitek Y-2507 without success (i.e. it doesn't
> work properly).
>
>
> There are a couple of products that claim Linux and webcam
> compatibility, e.g.
>
>
>
http://www.aten.com/products/Mobility-&-USB/USB-Extenders/USB-2.0-Extender~UCE260.html#.VrOI9jZ95E7
>
>
> We'd be interested to know if anyone has tested these, or has a
> working configuration in production (webcam > extender receiver >
> CAT5 > extender sender > capture agent).
>
>
> Regards
>
> Stephen
>
>
> ------------------------------------------------------------------------
> from
+27 21 650 9111 <tel:%2B27%2021%20650%209111>. This e-mail is
> intended only for the person(s) to whom it is addressed. If the
> e-mail has reached you in error, please notify the author. If you
> are not the intended recipient of the e-mail you may not use,
> disclose, copy, redirect or print the content. If this e-mail is not
> related to the business of UCT it is sent by the sender in the
> sender's individual capacity.
>
>
> --
> You received this message because you are subscribed to the Google
> Groups "Matterhorn Users" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to
matterhorn-use...@opencast.org
> <mailto:
matterhorn-use...@opencast.org>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "Matterhorn Users" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to
matterhorn-use...@opencast.org
> <mailto:
matterhorn-use...@opencast.org>.
>
> --
> You received this message because you are subscribed to the Google
> Groups "Matterhorn Users" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to
matterhorn-use...@opencast.org
> <mailto:
matterhorn-use...@opencast.org>.
--
Paul Pettit
Multimedia Development
University of Sussex
+44 (0) 1273 87 3223