[PATCH] USB: uas: give the error handler the correct name

[Oliver Neukum]

A UAS device can in principle contain multiple busses.
A reset on the USB level will reset them all. We
cannot reset a single bus.
In practical terms this does not matter, as only
one method of reset is implemented, but we should
not lie.

Signed-off-by : Oliver Neukum <one...@suse.com>
---
drivers/usb/storage/uas.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 0a9902d2b118..265162981269 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -772,7 +772,7 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
return FAILED;
}

-static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
+static int uas_eh_host_reset_handler(struct scsi_cmnd *cmnd)
{
struct scsi_device *sdev = cmnd->device;
struct uas_dev_info *devinfo = sdev->hostdata;
@@ -918,7 +918,7 @@ static const struct scsi_host_template uas_host_template = {
.sdev_init = uas_sdev_init,
.sdev_configure = uas_sdev_configure,
.eh_abort_handler = uas_eh_abort_handler,
- .eh_device_reset_handler = uas_eh_device_reset_handler,
+ .eh_host_reset_handler = uas_eh_host_reset_handler,
.this_id = -1,
.skip_settle_delay = 1,
/*
--
2.53.0