12-CURRENT Install - Network Issues

30 views

Skip to first unread message

ron georgia

unread,

Jul 16, 2018, 11:02:14 AM7/16/18

to HardenedBSD Users

All,
Attempted to install HBSD-12CURRENT on QOTOM Q190G4-S02 Barebone Industrial mini PC and my Lenovo X200.

1. Download hbsd-12current 201807141246
2. Burn USB image
3. Boot from EFI portion of the usb image (non UEFI boot hangs)
* Noticed that the monitor was relegated to 800x600, while the HBSD-11.2 saw 1280x1200
4. Installed (two mirrored drives for zfs)
5. Intel NICs not responding correctly. Got a buffer full message. Dhclient times out trying to get an IP from server.
6. Used USB wifi; however, the wifi interface was detected as rtwn0 while HBSD-11.2 sees a urtwn0, which works.
7. Wpa-supplicant was set up, but I had to "service netif restart" several times before the wifi grabbed an IP (I wonder if I used if_urtwn_load=”YES” if I would have had better results?)
8. Pkg update hung and timed out, so did hbsd-update. This was probably due to the flaking wifi driver…?
9. Took several attempts to "pkg inst sudo", but that finally got through.
10. Installed and loaded intel_em_kmod, that did not help
11. Tried to use polling on the em* NICs, that was a no go.
12. Wanted to test the video so I tried to download and install xorg. S-L-O-W. Had to restart the pkg install three times. It never downloaded the entire package. Kept timing out. (At least it gave me time to read a little of my Violent Python book.)
13. I tried to install HBSD-12Current on my beloved (BSD friendly) Lenovo X200, got the same network issue.

So, I know the issue is with FreeBSD and Shawn has looped in Sean Bruno.

The happy ending is I installed HBSD-11.2 on both my QOTOM and my laptop. I’ll probably spend a little time learning about secadm and desktop configuration on HBSD. Just wanted to put this out there.

ron georgia

unread,

Jul 16, 2018, 11:08:47 AM7/16/18

to HardenedBSD Users

BTW. Any and all suggestions are welcome. I don't mind using my QOTOM as a guinea pig for 12CURRENT.

ron georgia

unread,

Jul 18, 2018, 4:03:34 PM7/18/18

to HardenedBSD Users

Is anyone else having the same network issue with CURRENT? I just tried HardenedBSD-CURRENT-amd64-s201807171501-memstick.img with the same results.

On Monday, July 16, 2018 at 11:02:14 AM UTC-4, ron georgia wrote:

Shawn Webb

unread,

Jul 18, 2018, 4:10:11 PM7/18/18

to ron georgia, HardenedBSD Users

Can you post the output of this command: pciconf -lv

on all my systems, the majority of which use Intel network cards,
networking is working fine. I don't use UEFI to boot, though.

The system I'm typing this email on is a HardenedBSD 12-CURRENT/amd64
system, a Dell Precision 7510 laptop.

The em0 network adapter on my system is this:

em0@pci0:0:31:6: class=0x020000 card=0x06d91028 chip=0x15b78086 rev=0x31 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection (2) I219-LM'
class = network
subclass = ethernet

I do have another laptop that I can try UEFI boot on. I'll try that
and report back.

Given that (in private emails) you've reproduced the issue on FreeBSD
as well, I'd suggest filing a bug report with upstream FreeBSD.
Regardless of my test results, you're having what seems to be a
legitimate bug.

Thanks,

--
Shawn Webb
Cofounder and Security Engineer
HardenedBSD

Tor-ified Signal: +1 443-546-8752
Tor+XMPP+OTR: lat...@is.a.hacker.sx
GPG Key ID: 0x6A84658F52456EEE
GPG Key Fingerprint: 2ABA B6BD EF6A F486 BE89 3D9E 6A84 658F 5245 6EEE

On Wed, Jul 18, 2018 at 01:03:34PM -0700, ron georgia wrote:
> Is anyone else having the same network issue with CURRENT? I just tried
> HardenedBSD-CURRENT-amd64-s201807171501-memstick.img with the same results.
>
> On Monday, July 16, 2018 at 11:02:14 AM UTC-4, ron georgia wrote:
> >
> > All,
> > Attempted to install HBSD-12CURRENT on QOTOM Q190G4-S02 Barebone
> > Industrial mini PC and my Lenovo X200.
> >
> > 1. Download hbsd-12current 201807141246
> > 2. Burn USB image
> > 3. Boot from EFI portion of the usb image (non UEFI boot hangs)
> > * Noticed that the monitor was relegated to 800x600, while the HBSD-11.2 saw 1280x1200
> > 4. Installed (two mirrored drives for zfs)
> > 5. Intel NICs not responding correctly. Got a buffer full message. Dhclient times out trying to get an IP from server.
> > 6. Used USB wifi; however, the wifi interface was detected as rtwn0 while HBSD-11.2 sees a urtwn0, which works.

> > 7. Wpa-supplicant was set up, but I had to "service netif restart" several times before the wifi grabbed an IP (I wonder if I used if_urtwn_load=???YES??? if I would have had better results?)
> > 8. Pkg update hung and timed out, so did hbsd-update. This was probably due to the flaking wifi driver????

> > 9. Took several attempts to "pkg inst sudo", but that finally got through.
> > 10. Installed and loaded intel_em_kmod, that did not help
> > 11. Tried to use polling on the em* NICs, that was a no go.
> > 12. Wanted to test the video so I tried to download and install xorg. S-L-O-W. Had to restart the pkg install three times. It never downloaded the entire package. Kept timing out. (At least it gave me time to read a little of my Violent Python book.)
> > 13. I tried to install HBSD-12Current on my beloved (BSD friendly) Lenovo X200, got the same network issue.
> >
> > So, I know the issue is with FreeBSD and Shawn has looped in Sean Bruno.
> >

> > The happy ending is I installed HBSD-11.2 on both my QOTOM and my laptop. I???ll probably spend a little time learning about secadm and desktop configuration on HBSD. Just wanted to put this out there.
> >
> >
>

signature.asc

Ron Georgia

unread,

Jul 18, 2018, 4:11:55 PM7/18/18

to Shawn Webb, HardenedBSD Users

I will try to get that info for you. I tried to boot non-UEFI, but the
boot prompt just hung up.

ron georgia

unread,

Jul 18, 2018, 9:12:28 PM7/18/18

to HardenedBSD Users, rong...@gmail.com

I was able to install 12-CURRENT on both the Lenovo and the QOTOM using the wifi. (I found a different wife dongle for the QOTOM which worked better.) The Intel NIC on the Lenovo worked after the initial boot; however, I get a console "buffer full" error message for that NIC. I still cannot get the NICs for the QOTOM to work. Is there another driver maybe? Attached are the results for pciconf -lv and dmesg for both units.

dmesg_lenovo.txt

dmesg_QOTOM.txt

pciconf_lv_lenovo.txt

pciconf_lv_QOTOM.txt

Shawn Webb

unread,

Jul 18, 2018, 9:20:25 PM7/18/18

to ron georgia, HardenedBSD Users

The "buffer full" message is safe to ignore. It's due to recent work
to switch to a new framework, called iflib, for managing network
devices.

> [419] wlan0: Ethernet address: 00:1e:65:1f:7e:d8
> [419] iwn0: iwn_read_firmware: ucode rev=0x08530501
> [421] iwn0: iwn_read_firmware: ucode rev=0x08530501
> [437] wlan0: link state changed to UP
> [488] wlan0: link state changed to DOWN
> [493] Waiting (max 60 seconds) for system process `vnlru' to stop... done
> [493] Waiting (max 60 seconds) for system process `syncer' to stop...
> [494] Syncing disks, vnodes remaining... 0 0 0 0 done
> [497] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
> [497] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
> [498] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
> [499] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
> [499] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
> [499] All buffers synced.
> [499] lock order reversal:
> [499] 1st 0xfffff80006b4b7e8 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1343
> [499] 2nd 0xfffff80006b4c248 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2572
> [500] Uptime: 8m20s
> [500] umass0: detached
> [500] ubt0: detached
> [500] uhci_interrupt: resume detect
> [500] Rebooting...
> [500] link state changed to down
> [500] em0: link state changed to DOWN
> [501] cpu_reset: Stopping other CPUs
> Copyright (c) 2013-2018 The HardenedBSD Project.
> [1] Copyright (c) 1992-2018 The FreeBSD Project.
> [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> [1] The Regents of the University of California. All rights reserved.
> [1] FreeBSD is a registered trademark of The FreeBSD Foundation.
> [1] FreeBSD 12.0-CURRENT #0 [DEVEL:HardenedBSD-CURRENT-amd64:1262]: Tue Jul 17 19:00:41 UTC 2018
> [1] ro...@nyi-01.build.hardenedbsd.org:/usr/obj/usr/src/amd64.amd64/sys/HARDENEDBSD amd64
> [1] FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
> [1] WARNING: WITNESS option enabled, expect reduced performance.
> [1] VT(vga): resolution 640x480
> [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1200058 __FreeBSD_version 1200074).
> [1] CPU: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (2394.05-MHz K8-class CPU)
> [1] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10
> [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> [1] Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
> [1] AMD Features=0x20100800<SYSCALL,NX,LM>
> [1] AMD Features2=0x1<LAHF>
> [1] VT-x: HLT,PAUSE
> [1] TSC: P-state invariant, performance statistics
> [1] real memory = 8589934592 (8192 MB)
> [1] avail memory = 8139833344 (7762 MB)
> [1] Event timer "LAPIC" quality 100
> [1] ACPI APIC Table: <LENOVO TP-7X >
> [1] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> [1] FreeBSD/SMP: 1 package(s) x 2 core(s)
> [1] random: unblocking device.
> [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20180629/tbfadt-748)
> [1] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180629/tbfadt-850)
> [1] ioapic0: Changing APIC ID to 1
> [1] ioapic0 <Version 2.0> irqs 0-23 on motherboard
> [1] Launching APs: 1
> [1] Timecounter "TSC-low" frequency 1197022734 Hz quality 1000
> [1] random: entropy device external interface
> [1] [ath_hal] loaded
> [1] kbd1 at kbdmux0
> [1] module_register_init: MOD_LOAD (vesa, 0xffffffff81063830, 0) error 19
> [1] netmap: loaded module
> [1] nexus0
> [1] vtvga0: <VT VGA driver> on motherboard
> [1] cryptosoft0: <software crypto> on motherboard
> [1] aesni0: No AES or SHA support.
> [1] acpi0: <LENOVO TP-7X> on motherboard
> [1] CPU1: local APIC error 0x40
> [1] CPU0: local APIC error 0x40
> [1] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
> [1] acpi0: Power Button (fixed)
> [1] cpu0: <ACPI CPU> on acpi0
> [1] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> [1] Timecounter "i8254" frequency 1193182 Hz quality 0
> [1] Event timer "i8254" frequency 1193182 Hz quality 100
> [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> [1] Timecounter "HPET" frequency 14318180 Hz quality 950
> [1] Event timer "HPET" frequency 14318180 Hz quality 450
> [1] Event timer "HPET1" frequency 14318180 Hz quality 440
> [1] Event timer "HPET2" frequency 14318180 Hz quality 440
> [1] Event timer "HPET3" frequency 14318180 Hz quality 440
> [1] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
> [1] Event timer "RTC" frequency 32768 Hz quality 0
> [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> [1] acpi_lid0: <Control Method Lid Switch> on acpi0
> [1] acpi_button0: <Sleep Button> on acpi0
> [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> [1] pci0: <ACPI PCI bus> on pcib0
> [1] vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
> [1] agp0: <Intel GM45 SVGA controller> on vgapci0
> [1] agp0: aperture size is 256M, detected 32764k stolen memory
> [1] vgapci0: Boot video device
> [1] vgapci1: <VGA-compatible display> mem 0xf2400000-0xf24fffff at device 2.1 on pci0
> [1] pci0: <simple comms> at device 3.0 (no driver attached)
> [1] em0: <Intel(R) PRO/1000 Network Connection> port 0x1820-0x183f mem 0xf2600000-0xf261ffff,0xf2624000-0xf2624fff irq 20 at device 25.0 on pci0
> [1] em0: attach_pre capping queues at 1
> [1] em0: using 1024 tx descriptors and 1024 rx descriptors
> [1] em0: msix_init qsets capped at 1
> [1] em0: Unable to map MSIX table
> [1] em0: Using an MSI interrupt
> [1] em0: allocated for 1 tx_queues
> [1] em0: allocated for 1 rx_queues
> [1] em0: Ethernet address: 00:1f:16:21:12:e9
> [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024
> [1] uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at device 26.0 on pci0
> [1] usbus0 on uhci0
> [1] usbus0: 12Mbps Full Speed USB v1.0
> [1] uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 21 at device 26.1 on pci0
> [1] usbus1 on uhci1
> [1] usbus1: 12Mbps Full Speed USB v1.0
> [1] uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 22 at device 26.2 on pci0
> [1] usbus2 on uhci2
> [1] usbus2: 12Mbps Full Speed USB v1.0
> [1] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2825400-0xf28257ff irq 23 at device 26.7 on pci0
> [1] usbus3: EHCI version 1.0
> [1] usbus3 on ehci0
> [1] usbus3: 480Mbps High Speed USB v2.0
> [1] hdac0: <Intel 82801I HDA Controller> mem 0xf2620000-0xf2623fff irq 17 at device 27.0 on pci0
> [1] pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
> [1] pcib1: [GIANT-LOCKED]
> [1] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
> [1] pcib2: [GIANT-LOCKED]
> [1] pci1: <ACPI PCI bus> on pcib2
> [1] iwn0: <Intel WiFi Link 5100> mem 0xf2500000-0xf2501fff irq 17 at device 0.0 on pci1
> [1] pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
> [1] pcib3: [GIANT-LOCKED]
> [1] uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
> [1] usbus4 on uhci3
> [1] usbus4: 12Mbps Full Speed USB v1.0
> [1] uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
> [1] usbus5 on uhci4
> [1] usbus5: 12Mbps Full Speed USB v1.0
> [1] uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
> [1] usbus6 on uhci5
> [1] usbus6: 12Mbps Full Speed USB v1.0
> [1] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2825800-0xf2825bff irq 19 at device 29.7 on pci0
> [1] usbus7: EHCI version 1.0
> [1] usbus7 on ehci1
> [1] usbus7: 480Mbps High Speed USB v2.0
> [1] pcib4: <PCI-PCI bridge> at device 30.0 on pci0
> [1] pci2: <PCI bus> on pcib4
> [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
> [1] isa0: <ISA bus> on isab0
> [1] atapci0: <Intel ICH9M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f,0x1810-0x181f at device 31.2 on pci0
> [1] ata0: <ATA channel> at channel 0 on atapci0
> [1] ata1: <ATA channel> at channel 1 on atapci0
> [1] acpi_tz0: <Thermal Zone> on acpi0
> [1] acpi_tz1: <Thermal Zone> on acpi0
> [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
> [1] kbd0 at atkbd0
> [1] atkbd0: [GIANT-LOCKED]
> [1] psm0: <PS/2 Mouse> irq 12 on atkbdc0
> [1] psm0: [GIANT-LOCKED]
> [1] psm0: model Generic PS/2 mouse, device ID 0
> [1] battery0: <ACPI Control Method Battery> on acpi0
> [1] acpi_acad0: <AC Adapter> on acpi0
> [1] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xde000-0xdf7ff,0xe0000-0xeffff pnpid ORM0000 on isa0
> [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
> [1] ZFS filesystem version: 5
> [1] ZFS storage pool version: features support (5000)
> [1] Timecounters tick every 1.000 msec
> [1] hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
> [1] hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
> [1] pcm0: <Conexant CX20561 (Hermosa) (Analog 2.0+HP/2.0)> at nid 26,22 and 24 on hdaa0
> [1] pcm1: <Conexant CX20561 (Hermosa) (Internal Analog Mic)> at nid 29 on hdaa0
> [1] unknown: <Conexant CX20561 (Hermosa) HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached)
> [1] ugen7.1: <Intel EHCI root HUB> at usbus7
> [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> [1] ugen4.1: <Intel UHCI root HUB> at usbus4
> [1] uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> [1] ugen2.1: <Intel UHCI root HUB> at usbus2
> [1] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> [1] ugen0.1: <Intel UHCI root HUB> at usbus0
> [1] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> [1] ugen6.1: <Intel UHCI root HUB> at usbus6
> [1] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> [1] ugen5.1: <Intel UHCI root HUB> at usbus5
> [1] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> [1] ugen3.1: <Intel EHCI root HUB> at usbus3
> [1] uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> [1] ugen1.1: <Intel UHCI root HUB> at usbus1
> [1] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> [1] uhub1: 2 ports with 2 removable, self powered
> [1] uhub2: 2 ports with 2 removable, self powered
> [1] uhub3: 2 ports with 2 removable, self powered
> [1] uhub4: 2 ports with 2 removable, self powered
> [1] uhub5: 2 ports with 2 removable, self powered
> [1] uhub7: 2 ports with 2 removable, self powered
> [2] ada0 at ata0 bus 0 scbus0 target 0 lun 0
> ada0: <INTEL SSDSC2BW240A4 DC12> ACS-2 ATA SATA 3.x device
> ada0: Serial Number CVDA347105JB2403GN
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
> ada0: 228936MB (468862128 512 byte sectors)
> ada0: quirks=0x1<4K>
> [2] WARNING: WITNESS option enabled, expect reduced performance.
> [2] Trying to mount root from zfs:zroot/ROOT/default []...
> [2] Root mount waiting for: usbus7 usbus3
> [3] Root mount waiting for: usbus7 usbus3
> [3] uhub0: 6 ports with 6 removable, self powered
> [3] uhub6: 6 ports with 6 removable, self powered
> [4] Root mount waiting for: usbus3
> [6] ugen1.2: <vendor 0x08ff Fingerprint Sensor> at usbus1
> [6] wlan0: Ethernet address: 00:1e:65:1f:7e:d8
> [6] lo0: link state changed to UP
> [7] iwn0: iwn_read_firmware: ucode rev=0x08530501
> [7] ugen1.3: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II> at usbus1
> [7] wlan0: link state changed to UP
> [9] Link state changed to up
> [9] em0: link state changed to UP
> [10] ubt0 on uhub7
> [10] ubt0: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II, class 224/1, rev 2.00/3.99, addr 3> on usbus1
> [14] WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> [14] WARNING: attempt to domain_add(netgraph) after domainfinalize()
> [547] in6_purgeaddr: err=65, destination address delete failed
> [547] lo0: link state changed to DOWN
> [547] wlan0: link state changed to DOWN
> [547] wlan0: Ethernet address: 00:1e:65:1f:7e:d8
> [547] lo0: link state changed to UP
> [547] iwn0: iwn_read_firmware: ucode rev=0x08530501
> [548] link state changed to down
> [548] em0: link state changed to DOWN
> [548] wlan0: link state changed to UP
> [551] Link state changed to up
> [551] em0: link state changed to UP
> [801] wlan0: link state changed to DOWN
> [809] Waiting (max 60 seconds) for system process `vnlru' to stop... done
> [809]
> [809] Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done
> [813] Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
> [813] Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
> [813] Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
> [813] Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
> [814] Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
> [815] All buffers synced.
> [815] lock order reversal:
> [815] 1st 0xfffff80008437068 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1343
> [815] 2nd 0xfffff80006eaa608 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2572
> [815] stack backtrace:
> [815] #0 0xffffffff80b5a8f3 at witness_debugger+0x73
> [815] #1 0xffffffff80b5a774 at witness_checkorder+0xe34
> [815] #2 0xffffffff80ac3dda at lockmgr_lock_fast_path+0x17a
> [815] #3 0xffffffff81158030 at VOP_LOCK1_APV+0xe0
> [815] #4 0xffffffff80bd60d6 at _vn_lock+0x66
> [815] #5 0xffffffff80bc4f5f at vget+0x7f
> [815] #6 0xffffffff8099b50d at devfs_allocv+0xdd
> [815] #7 0xffffffff8099b003 at devfs_root+0x43
> [815] #8 0xffffffff80bc5a70 at vflush+0x70
> [815] #9 0xffffffff8099aef3 at devfs_unmount+0x43
> [815] #10 0xffffffff80bbd3eb at dounmount+0x52b
> [815] #11 0xffffffff80bc6f04 at vfs_unmountall+0xc4
> [815] #12 0xffffffff80ba1ef5 at bufshutdown+0x2c5
> [815] #13 0xffffffff80aeeeb0 at kern_reboot+0x220
> [815] #14 0xffffffff80aeec39 at sys_reboot+0x3a9
> [815] #15 0xffffffff80fd52ee at amd64_syscall+0x29e
> [815] #16 0xffffffff80faf8ed at fast_syscall_common+0x101
> [815] Uptime: 13m35s
> [819] ubt0: detached
> [819] Rebooting...
> [820] cpu_reset: Stopping other CPUs
> Copyright (c) 2013-2018 The HardenedBSD Project.
> [1] Copyright (c) 1992-2018 The FreeBSD Project.
> [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> [1] The Regents of the University of California. All rights reserved.
> [1] FreeBSD is a registered trademark of The FreeBSD Foundation.
> [1] FreeBSD 12.0-CURRENT #0 : Wed Jul 18 15:37:28 UTC 2018
> [1] root@updater-01:/usr/obj/usr/src/amd64.amd64/sys/HARDENEDBSD amd64
> [1] FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
> [1] WARNING: WITNESS option enabled, expect reduced performance.
> [1] VT(vga): resolution 640x480
> [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1200058 __FreeBSD_version 1200074).
> [1] CPU: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (2394.05-MHz K8-class CPU)
> [1] Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10
> [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> [1] Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
> [1] AMD Features=0x20100800<SYSCALL,NX,LM>
> [1] AMD Features2=0x1<LAHF>
> [1] VT-x: HLT,PAUSE
> [1] TSC: P-state invariant, performance statistics
> [1] real memory = 8589934592 (8192 MB)
> [1] avail memory = 8139833344 (7762 MB)
> [1] Event timer "LAPIC" quality 100
> [1] ACPI APIC Table: <LENOVO TP-7X >
> [1] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> [1] FreeBSD/SMP: 1 package(s) x 2 core(s)
> [1] random: unblocking device.
> [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20180629/tbfadt-748)
> [1] Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20180629/tbfadt-850)
> [1] ioapic0: Changing APIC ID to 1
> [1] ioapic0 <Version 2.0> irqs 0-23 on motherboard
> [1] Launching APs: 1
> [1] Timecounter "TSC-low" frequency 1197025825 Hz quality 1000
> [1] random: entropy device external interface
> [1] [ath_hal] loaded
> [1] kbd1 at kbdmux0
> [1] module_register_init: MOD_LOAD (vesa, 0xffffffff810631c0, 0) error 19
> [1] netmap: loaded module
> [1] nexus0
> [1] vtvga0: <VT VGA driver> on motherboard
> [1] cryptosoft0: <software crypto> on motherboard
> [1] aesni0: No AES or SHA support.
> [1] acpi0: <LENOVO TP-7X> on motherboard
> [1] CPU1: local APIC error 0x40
> [1] CPU0: local APIC error 0x40
> [1] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
> [1] acpi0: Power Button (fixed)
> [1] cpu0: <ACPI CPU> on acpi0
> [1] attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> [1] Timecounter "i8254" frequency 1193182 Hz quality 0
> [1] Event timer "i8254" frequency 1193182 Hz quality 100
> [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> [1] Timecounter "HPET" frequency 14318180 Hz quality 950
> [1] Event timer "HPET" frequency 14318180 Hz quality 450
> [1] Event timer "HPET1" frequency 14318180 Hz quality 440
> [1] Event timer "HPET2" frequency 14318180 Hz quality 440
> [1] Event timer "HPET3" frequency 14318180 Hz quality 440
> [1] atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
> [1] Event timer "RTC" frequency 32768 Hz quality 0
> [1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> [1] acpi_lid0: <Control Method Lid Switch> on acpi0
> [1] acpi_button0: <Sleep Button> on acpi0
> [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> [1] pci0: <ACPI PCI bus> on pcib0
> [1] vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
> [1] agp0: <Intel GM45 SVGA controller> on vgapci0
> [1] agp0: aperture size is 256M, detected 32764k stolen memory
> [1] vgapci0: Boot video device
> [1] vgapci1: <VGA-compatible display> mem 0xf2400000-0xf24fffff at device 2.1 on pci0
> [1] pci0: <simple comms> at device 3.0 (no driver attached)
> [1] em0: <Intel(R) PRO/1000 Network Connection> port 0x1820-0x183f mem 0xf2600000-0xf261ffff,0xf2624000-0xf2624fff irq 20 at device 25.0 on pci0
> [1] em0: attach_pre capping queues at 1
> [1] em0: using 1024 tx descriptors and 1024 rx descriptors
> [1] em0: msix_init qsets capped at 1
> [1] em0: Unable to map MSIX table
> [1] em0: Using an MSI interrupt
> [1] em0: allocated for 1 tx_queues
> [1] em0: allocated for 1 rx_queues
> [1] em0: Ethernet address: 00:1f:16:21:12:e9
> [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024
> [1] uhci0: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at device 26.0 on pci0
> [1] usbus0 on uhci0
> [1] usbus0: 12Mbps Full Speed USB v1.0
> [1] uhci1: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 21 at device 26.1 on pci0
> [1] usbus1 on uhci1
> [1] usbus1: 12Mbps Full Speed USB v1.0
> [1] uhci2: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 22 at device 26.2 on pci0
> [1] usbus2 on uhci2
> [1] usbus2: 12Mbps Full Speed USB v1.0
> [1] ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2825400-0xf28257ff irq 23 at device 26.7 on pci0
> [1] usbus3: EHCI version 1.0
> [1] usbus3 on ehci0
> [1] usbus3: 480Mbps High Speed USB v2.0
> [1] hdac0: <Intel 82801I HDA Controller> mem 0xf2620000-0xf2623fff irq 17 at device 27.0 on pci0
> [1] pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
> [1] pcib1: [GIANT-LOCKED]
> [1] pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
> [1] pcib2: [GIANT-LOCKED]
> [1] pci1: <ACPI PCI bus> on pcib2
> [1] iwn0: <Intel WiFi Link 5100> mem 0xf2500000-0xf2501fff irq 17 at device 0.0 on pci1
> [1] pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
> [1] pcib3: [GIANT-LOCKED]
> [1] uhci3: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
> [1] usbus4 on uhci3
> [1] usbus4: 12Mbps Full Speed USB v1.0
> [1] uhci4: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
> [1] usbus5 on uhci4
> [1] usbus5: 12Mbps Full Speed USB v1.0
> [1] uhci5: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
> [1] usbus6 on uhci5
> [1] usbus6: 12Mbps Full Speed USB v1.0
> [1] ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf2825800-0xf2825bff irq 19 at device 29.7 on pci0
> [1] usbus7: EHCI version 1.0
> [1] usbus7 on ehci1
> [1] usbus7: 480Mbps High Speed USB v2.0
> [1] pcib4: <PCI-PCI bridge> at device 30.0 on pci0
> [1] pci2: <PCI bus> on pcib4
> [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
> [1] isa0: <ISA bus> on isab0
> [1] atapci0: <Intel ICH9M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f,0x1810-0x181f at device 31.2 on pci0
> [1] ata0: <ATA channel> at channel 0 on atapci0
> [1] ata1: <ATA channel> at channel 1 on atapci0
> [1] acpi_tz0: <Thermal Zone> on acpi0
> [1] acpi_tz1: <Thermal Zone> on acpi0
> [1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> [1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
> [1] kbd0 at atkbd0
> [1] atkbd0: [GIANT-LOCKED]
> [1] psm0: <PS/2 Mouse> irq 12 on atkbdc0
> [1] psm0: [GIANT-LOCKED]
> [1] psm0: model Generic PS/2 mouse, device ID 0
> [1] battery0: <ACPI Control Method Battery> on acpi0
> [1] acpi_acad0: <AC Adapter> on acpi0
> [1] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xde000-0xdf7ff,0xe0000-0xeffff pnpid ORM0000 on isa0
> [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
> [1] ZFS filesystem version: 5
> [1] ZFS storage pool version: features support (5000)
> [1] Timecounters tick every 1.000 msec
> [1] hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0
> [1] hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0
> [1] pcm0: <Conexant CX20561 (Hermosa) (Analog 2.0+HP/2.0)> at nid 26,22 and 24 on hdaa0
> [1] pcm1: <Conexant CX20561 (Hermosa) (Internal Analog Mic)> at nid 29 on hdaa0
> [1] unknown: <Conexant CX20561 (Hermosa) HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached)
> [1] ugen7.1: <Intel EHCI root HUB> at usbus7
> [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
> [1] ugen3.1: <Intel EHCI root HUB> at usbus3
> [1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> [1] ugen1.1: <Intel UHCI root HUB> at usbus1
> [1] uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> [1] ugen6.1: <Intel UHCI root HUB> at usbus6
> [1] uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
> [1] ugen5.1: <Intel UHCI root HUB> at usbus5
> [1] uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> [1] ugen4.1: <Intel UHCI root HUB> at usbus4
> [1] uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> [1] ugen2.1: <Intel UHCI root HUB> at usbus2
> [1] uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> [1] ugen0.1: <Intel UHCI root HUB> at usbus0
> [1] uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> [1] uhub2: 2 ports with 2 removable, self powered
> [1] uhub3: 2 ports with 2 removable, self powered
> [1] uhub4: 2 ports with 2 removable, self powered
> [1] uhub5: 2 ports with 2 removable, self powered
> [1] uhub6: 2 ports with 2 removable, self powered
> [1] uhub7: 2 ports with 2 removable, self powered
> [2] ada0 at ata0 bus 0 scbus0 target 0 lun 0
> ada0: <INTEL SSDSC2BW240A4 DC12> ACS-2 ATA SATA 3.x device
> ada0: Serial Number CVDA347105JB2403GN
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
> ada0: 228936MB (468862128 512 byte sectors)
> ada0: quirks=0x1<4K>
> [2] WARNING: WITNESS option enabled, expect reduced performance.
> [2] Trying to mount root from zfs:zroot/ROOT/default []...
> [2] Root mount waiting for: usbus7 usbus3
> [3] Root mount waiting for: usbus7 usbus3
> [3] uhub1: 6 ports with 6 removable, self powered
> [3] uhub0: 6 ports with 6 removable, self powered
> [4] Root mount waiting for: usbus3
> [6] ugen1.2: <vendor 0x08ff Fingerprint Sensor> at usbus1
> [6] wlan0: Ethernet address: 00:1e:65:1f:7e:d8
> [6] lo0: link state changed to UP
> [6] Link state changed to up
> [6] em0: link state changed to UP
> [7] link state changed to down
> [7] em0: link state changed to DOWN
> [7] ugen1.3: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II> at usbus1
> [10] Link state changed to up
> [10] em0: link state changed to UP
> [11] iwn0: iwn_read_firmware: ucode rev=0x08530501
> [12] wlan0: link state changed to UP
> [15] ubt0 on uhub2
> [15] ubt0: <Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II, class 224/1, rev 2.00/3.99, addr 3> on usbus1
> [15] WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> [16] WARNING: attempt to domain_add(netgraph) after domainfinalize()
> [68] wlan0: link state changed to DOWN
> [69] wlan0: link state changed to UP
> [1776] wlan0: link state changed to DOWN
> [1777] wlan0: link state changed to UP
> [4722] wlan0: link state changed to DOWN
> [4724] wlan0: link state changed to UP
> [4733] wlan0: link state changed to DOWN
> [4734] wlan0: link state changed to UP
> [8332] wlan0: link state changed to DOWN
> [8334] wlan0: link state changed to UP
> [11932] wlan0: link state changed to DOWN
> [11933] wlan0: link state changed to UP

> [1] Copyright (c) 2013-2018 The HardenedBSD Project.
> [1] Copyright (c) 1992-2018 The FreeBSD Project.
> [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> [1] The Regents of the University of California. All rights reserved.
> [1] FreeBSD is a registered trademark of The FreeBSD Foundation.
> [1] FreeBSD 12.0-CURRENT #0 : Wed Jul 18 15:37:28 UTC 2018
> [1] root@updater-01:/usr/obj/usr/src/amd64.amd64/sys/HARDENEDBSD amd64
> [1] FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
> [1] WARNING: WITNESS option enabled, expect reduced performance.
> [1] VT(efifb): resolution 800x600
> [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1200058 __FreeBSD_version 1200074).
> [1] CPU: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (2000.05-MHz K8-class CPU)
> [1] Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8
> [1] Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> [1] Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND>
> [1] AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
> [1] AMD Features2=0x101<LAHF,Prefetch>
> [1] Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
> [1] VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
> [1] TSC: P-state invariant, performance statistics
> [1] real memory = 8589934592 (8192 MB)
> [1] avail memory = 8153186304 (7775 MB)
> [1] Event timer "LAPIC" quality 600
> [1] ACPI APIC Table: <ALASKA A M I >
> [1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
> [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> [1] FreeBSD/SMP: 1 package(s) x 4 core(s)
> [1] random: unblocking device.
> [1] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20180629/tbfadt-748)
> [1] ioapic0 <Version 2.0> irqs 0-86 on motherboard
> [1] Launching APs: 3 1 2
> [1] Timecounter "TSC" frequency 2000049744 Hz quality 1000
> [1] random: entropy device external interface
> [1] [ath_hal] loaded
> [1] kbd0 at kbdmux0
> [1] module_register_init: MOD_LOAD (vesa, 0xffffffff810631c0, 0) error 19
> [1] random: registering fast source Intel Secure Key RNG
> [1] random: fast provider: "Intel Secure Key RNG"
> [1] netmap: loaded module
> [1] nexus0
> [1] cryptosoft0: <software crypto> on motherboard
> [1] aesni0: No AES or SHA support.
> [1] acpi0: <ALASKA A M I > on motherboard
> [1] acpi0: Power Button (fixed)
> [1] unknown: I/O range not supported
> [1] cpu0: <ACPI CPU> on acpi0
> [1] atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
> [1] atrtc0: Warning: Couldn't map I/O.
> [1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
> [1] Event timer "RTC" frequency 32768 Hz quality 0
> [1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0
> [1] Timecounter "HPET" frequency 14318180 Hz quality 950
> [1] Event timer "HPET" frequency 14318180 Hz quality 450
> [1] Event timer "HPET1" frequency 14318180 Hz quality 440
> [1] Event timer "HPET2" frequency 14318180 Hz quality 440
> [1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> [1] Timecounter "i8254" frequency 1193182 Hz quality 0
> [1] Event timer "i8254" frequency 1193182 Hz quality 100
> [1] Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> [1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> [1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> [1] pci0: <ACPI PCI bus> on pcib0
> [1] vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
> [1] vgapci0: Boot video device
> [1] ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0a06000-0xd0a067ff irq 19 at device 19.0 on pci0
> [1] ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
> [1] ahcich0: <AHCI channel> at channel 0 on ahci0
> [1] ahcich1: <AHCI channel> at channel 1 on ahci0
> [1] pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
> [1] hdac0: <Intel BayTrail HDA Controller> mem 0xd0a00000-0xd0a03fff irq 22 at device 27.0 on pci0
> [1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> [1] pci1: <ACPI PCI bus> on pcib1
> [1] em0: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
> [1] em0: attach_pre capping queues at 1
> [1] em0: using 1024 tx descriptors and 1024 rx descriptors
> [1] em0: msix_init qsets capped at 1
> [1] em0: pxm cpus: 4 queue msgs: 6 admincnt: 1
> [1] em0: using 1 rx queues 1 tx queues
> [1] em0: Using MSIX interrupts with 2 vectors
> [1] em0: allocated for 1 tx_queues
> [1] em0: allocated for 1 rx_queues
> [1] em0: Ethernet address: 00:16:1c:a8:d4:a0
> [1] em0: netmap queues/slots: TX 1/1024, RX 1/1024
> [1] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
> [1] pci2: <ACPI PCI bus> on pcib2
> [1] em1: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xd0800000-0xd081ffff,0xd0820000-0xd0823fff irq 17 at device 0.0 on pci2
> [1] em1: attach_pre capping queues at 1
> [1] em1: using 1024 tx descriptors and 1024 rx descriptors
> [1] em1: msix_init qsets capped at 1
> [1] em1: pxm cpus: 4 queue msgs: 6 admincnt: 1
> [1] em1: using 1 rx queues 1 tx queues
> [1] em1: Using MSIX interrupts with 2 vectors
> [1] em1: allocated for 1 tx_queues
> [1] em1: allocated for 1 rx_queues
> [1] em1: Ethernet address: 00:16:1c:a8:d4:a1
> [1] em1: netmap queues/slots: TX 1/1024, RX 1/1024
> [1] pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
> [1] pci3: <ACPI PCI bus> on pcib3
> [1] em2: <Intel(R) PRO/1000 Network Connection> port 0xc000-0xc01f mem 0xd0700000-0xd071ffff,0xd0720000-0xd0723fff irq 18 at device 0.0 on pci3
> [1] em2: attach_pre capping queues at 1
> [1] em2: using 1024 tx descriptors and 1024 rx descriptors
> [1] em2: msix_init qsets capped at 1
> [1] em2: pxm cpus: 4 queue msgs: 6 admincnt: 1
> [1] em2: using 1 rx queues 1 tx queues
> [1] em2: Using MSIX interrupts with 2 vectors
> [1] em2: allocated for 1 tx_queues
> [1] em2: allocated for 1 rx_queues
> [1] em2: Ethernet address: 00:16:1c:a8:d4:a2
> [1] em2: netmap queues/slots: TX 1/1024, RX 1/1024
> [1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
> [1] pci4: <ACPI PCI bus> on pcib4
> [1] em3: <Intel(R) PRO/1000 Network Connection> port 0xb000-0xb01f mem 0xd0600000-0xd061ffff,0xd0620000-0xd0623fff irq 19 at device 0.0 on pci4
> [1] em3: attach_pre capping queues at 1
> [1] em3: using 1024 tx descriptors and 1024 rx descriptors
> [1] em3: msix_init qsets capped at 1
> [1] em3: pxm cpus: 4 queue msgs: 6 admincnt: 1
> [1] em3: using 1 rx queues 1 tx queues
> [1] em3: Using MSIX interrupts with 2 vectors
> [1] em3: allocated for 1 tx_queues
> [1] em3: allocated for 1 rx_queues
> [1] em3: Ethernet address: 00:16:1c:a8:d4:a3
> [1] em3: netmap queues/slots: TX 1/1024, RX 1/1024
> [1] ehci0: <Intel BayTrail USB 2.0 controller> mem 0xd0a05000-0xd0a053ff irq 23 at device 29.0 on pci0
> [1] usbus0: EHCI version 1.0
> [1] usbus0 on ehci0
> [1] usbus0: 480Mbps High Speed USB v2.0
> [1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
> [1] isa0: <ISA bus> on isab0
> [1] acpi_button0: <Sleep Button> on acpi0
> [1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> [1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
> [1] ZFS filesystem version: 5
> [1] ZFS storage pool version: features support (5000)
> [1] Timecounters tick every 1.000 msec
> [1] hdacc0: <Intel (0x2882) HDA CODEC> at cad 2 on hdac0
> [1] hdaa0: <Intel (0x2882) Audio Function Group> at nid 1 on hdacc0
> [1] pcm0: <Intel (0x2882) (HDMI/DP 8ch)> at nid 4 on hdaa0
> [1] ugen0.1: <Intel EHCI root HUB> at usbus0
> [1] uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> [1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <KINGSTON SMS200S3120G 60AABBF0> ATA8-ACS SATA 3.x device
> ada0: Serial Number 50026B726B053990
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
> ada0: Command Queueing enabled
> ada0: 114473MB (234441648 512 byte sectors)
> [1] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <KINGSTON SV300S37A120G 521ABBF0> ATA8-ACS SATA 3.x device
> ada1: Serial Number 50026B774105EF25
> ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 114473MB (234441648 512 byte sectors)
> [1] Trying to mount root from zfs:zroot/ROOT/default []...
> [1] WARNING: WITNESS option enabled, expect reduced performance.
> [1] Root mount waiting for: usbus0
> [2] Root mount waiting for: usbus0
> [3] Root mount waiting for: usbus0
> [4] Root mount waiting for: usbus0
> [4] uhub0: 8 ports with 8 removable, self powered
> [5] Root mount waiting for: usbus0
> [5] ugen0.2: <vendor 0x8087 product 0x07e6> at usbus0
> [5] uhub1 on uhub0
> [5] uhub1: <vendor 0x8087 product 0x07e6, class 9/0, rev 2.00/0.14, addr 2> on usbus0
> [5] uhub1: 4 ports with 4 removable, self powered
> [6] ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
> [6] uhub2 on uhub1
> [6] uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 3> on usbus0
> [6] Root mount waiting for: usbus0
> [7] uhub2: 4 ports with 4 removable, self powered
> [7] Root mount waiting for: usbus0
> [7] ugen0.4: <Chicony USB Keyboard> at usbus0
> [7] ukbd0 on uhub2
> [7] ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 4> on usbus0
> [7] kbd1 at ukbd0
> [8] ugen0.5: <Logitech USB Receiver> at usbus0
> [8] ukbd1 on uhub2
> [8] ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 5> on usbus0
> [8] kbd2 at ukbd1
> [8] Root mount waiting for: usbus0
> [9] ugen0.6: <Realtek 802.11n WLAN Adapter> at usbus0
> [12] lo0: link state changed to UP
> [16] Link state changed to up
> [16] em1: link state changed to UP
> [16] Link state changed to up
> [16] em2: link state changed to UP
> [16] Link state changed to up
> [16] em0: link state changed to UP
> [20] uhid0 on uhub2
> [20] uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.44, addr 4> on usbus0
> [20] uhid1 on uhub2
> [20] uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 5> on usbus0
> [20] ums0 on uhub2
> [20] ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 5> on usbus0
> [20] ums0: 16 buttons and [XYZT] coordinates ID=2
> [21] rtwn0 on uhub1
> [21] rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 6> on usbus0
> [21] rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
> [89] in6_purgeaddr: err=65, destination address delete failed
> [89] lo0: link state changed to DOWN
> [90] wlan0: Ethernet address: 00:21:2f:51:7d:30
> [90] lo0: link state changed to UP
> [91] link state changed to down
> [91] em0: link state changed to DOWN
> [93] wlan0: link state changed to UP
> [94] Link state changed to up
> [94] em0: link state changed to UP
> [3566] wlan0: link state changed to DOWN
> [3568] wlan0: link state changed to UP
> [7166] wlan0: link state changed to DOWN
> [7168] wlan0: link state changed to UP

> hostb0@pci0:0:0:0: class=0x060000 card=0x20e017aa chip=0x2a408086 rev=0x07 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Mobile 4 Series Chipset Memory Controller Hub'
> class = bridge
> subclass = HOST-PCI
> vgapci0@pci0:0:2:0: class=0x030000 card=0x20e417aa chip=0x2a428086 rev=0x07 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Mobile 4 Series Chipset Integrated Graphics Controller'
> class = display
> subclass = VGA
> vgapci1@pci0:0:2:1: class=0x038000 card=0x20e417aa chip=0x2a438086 rev=0x07 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Mobile 4 Series Chipset Integrated Graphics Controller'
> class = display
> none0@pci0:0:3:0: class=0x078000 card=0x20e617aa chip=0x2a448086 rev=0x07 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Mobile 4 Series Chipset MEI Controller'
> class = simple comms
> em0@pci0:0:25:0: class=0x020000 card=0x20ee17aa chip=0x10bf8086 rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82567LF Gigabit Network Connection'