shoptalk

All, We are currently searching for a new full-time employee to work in our pump and machine shops.

All, There are three spots open for MQTT training this Friday 2 PM. Flyer attached. Please consider

All, Our printer is back online. There are some new fans inside of it, which might help with the

All, Our 3D printer has run out of support material, and unfortunately we don't have any more in

All, Asbestos abatement in the machine shop continues today, it seems like they are roughly half done

All, The machine shop is currently closed for asbestos abatement. Please stay out of the area. I don

Instrument makers, Our friends at NSLS2 asked me to pass along this job opportunity. Please consider

All, Matthews and Daniels will be closed until at least 10 AM tomorrow morning. We'll open as

All, I'm happy to share that the 3D printer has been fixed. I've learned some more tricks, so

All, Our wonderful printer is down again with a new problem I don't yet know how to address. I

All, Please share the following advertisement with any undergraduates that might be interested. We

All, I've recently come across a pretty cool project [1] that I think might be useful to many of

All, Former graduate student (Zanni) Ariel Alperstein asked me to pass along the following job

All, I'm pleased to say that our shared equipment has been repaired again. Sorry it's been

All, Steve Myers will be giving a lesson on Fasteners this Friday at 2 PM. There are four spots

All, I'm ready to print your parts again, but please send them to me. Send me an STL file and let

All, I've hacked together a TEMPORARY copy of grafana and influx that we can use for now while we

All, Our 3D printer has been fixed. Feel free to use it. Thanks for your patience. Best, Blaise - - -

All, Bolts, screws, sockets, nuts, washers, pins, anchors, clips, inserts, and rivets. Oh my! There

All, Just a reminder that the instrument shop will be closed tomorrow for the electrical shutdown.

All, After servicing by Stratasys our printer is working again. Feel free to send STL files to me or

All, Just a note that the instrument shop will be closed all day on Thursday August 4th during the

All, The departmental MQTT server is down. I'll let you know when it's been restored. Best,

All, I will be leading an interactive introduction to yaq [1] at 2 PM August 19. There will be a

Congratulations to Steve! https://news.wisc.edu/10-receive-university-staff-recognition-awards/ - - -

All, Will was able to rescue ten ultravolt power supplies from old decommissioned Smith Group

All, Thanks to Amber Bartz our 3D printer lives again! To those using the "3D printer self

All, Anyone who has thermocouple datalogging applications will be interested to know that the shop is

All, Steve will be leading a training on fasteners Friday July 15th. See attached flyer. Bolts,

All, Unfortunately the 3D printer is still broken at this time. I am currently working through the