Dear EarthScope Community and PASSCAL PIs:
In
September of 2023 we discovered that SmartSolo node (IGU-16HR 3C, 5Hz)
data archived from PASSCAL experiments has a non-standard polarity on
the Z-channel relative to the down-positive industry geophone
convention. Details of this discovery and the steps that will be taken
to correct this discrepancy, which will affect the existing and future
archives, are outlined below.
Issue
The expected polarity for data archived from PASSCAL experiments are as follow:
- Broadband seismometer – Up (Z-dip = -90), North and East motion produce a positive polarity.
- Geophone – Down (Z-dip = +90), North and East motion produce a positive polarity
Data
archived, both PH5 and SEED, prior to October 05, 2023 from PASSCAL
experiments using the SmartSolo nodes have the following polarity and
metadata mismatch:
- Up (Z-dip = -90), North, and East motion produce a positive polarity
- SmartSolo
5Hz geophone Z-channel metadata incorrectly describes the existing
timeseries polarity. i.e. The data are Z-dip = -90 and the metadata are
Z-dip = +90.
Corrective Measures
We will take the following steps to correct the existing archives (October 05, 2023 and prior):
- Metadata
for all SmartSolo archives will be updated to accurately reflect the
polarity of the associated Z data. This means Z-dip will be updated from
+90 to -90.
- The
timeseries data will not be corrected; meaning already-archived data
will remain as-is, and retain up-positive polarity (Z-Dip = -90),
matching that of the updated metadata.
- A report will be attached to all affected and edited archives for future users to be aware of this convention.
Future Archives
We will take the following steps when archiving future SmartSolo node experiments (Effective October 05, 2023):
- All SmartSolo data will be archived using the down-positive industry convention for geophones regardless of archive format.
- Metadata will correctly describe a Z-dip of +90.
Note
- Only
SmartSolo Z-channel data is affected. Existing metadata correctly
describes the horizontal channels of all SmartSolo experiments, and
Fairfield archives are wholly unaffected.
- Sensors
(also referred to as geophones) with industry standard conventions in
the PASSCAL pool of equipment are: L-22, L-28/Y-28, Sercel 40Hz, and
all-in-one units; FairField ZLand 3C nodes and SmartSolo IGU-16HR 3C