Filament Build-up Typhoon

[Ryan Hitcho]

The nozzle is encased in PLA. I removed the metal shroud around the nozzle. I cannot remove this thick shell that accumulated.

I attempted to remove the shield that houses the heat transition tube and the pcb.

Is this attached by any other means than the 4 bolts?

Please inform me on how I should go about removing this build-up.

Sincerely,

Ryan

[Technical Support]

Hi Ryan,

For this kind of problem, please contact our support directly through our website. We'll take a look at your unit.

Depending on the cause, we can repair it or exchange it for a new one.

Phil Support Team
	100-1505 Saint-Thomas Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion on the web visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/3536958f-4c36-4f7d-ad16-52076ee33701n%40dyzedesign.com.