Integration with kuka Robot

[david pareira]

Hello,

I want to install Non-Planar typhoon LCX extruder with the robot is there any step wise guide for the installation?

Thank You,

Regards,

David

[Technical Support]

Hi David,

In order to use a robot as the controller, we have a small list of requirements here: https://docs.dyzedesign.com/typhoon.html#robotic-arm-guideline

As specified in the guide, we'll be providing very soon a Ethernet/IP control box that can be wired directly to the robot controller. If you are interested, you can contact the sales team!

Phil Support Team
	100-1505 Saint-Thomas Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion on the web visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/157cf1ac-e7f8-489b-9d45-4ff0530592d6n%40dyzedesign.com.