Filament Sentinel False Positives when printing PVA
14 views
Skip to first unread message
Benjamin Fondell
Jul 21, 2021, 2:57:36 PM7/21/21
to DYZE DESIGN
Getting false positives from my Filament Sentinel while printing PVA (slightly translucent).
I suspect it is tripping the sentinel because the material is somewhat transparent and it will occasionally let the laser pass through the filament.
I suspect it is tripping the sentinel because the material is somewhat transparent and it will occasionally let the laser pass through the filament.
Firmware: RRF 2
Sensor Config: M591 D0 P1 C5 S1
Can I use the E param with M591 when using a 'simple sensor' (P1)?
Do you have a solution?
Do you have a solution?
Technical Support
Jul 23, 2021, 9:31:41 AM7/23/21
to b.p.f...@gmail.com, DYZE DESIGN
Hi Benjamin,
If you take your PVA filament and twist it in the sensor, is the light going out?
If so, we'll RMA this unit and we'd greatly appreciate it if you could send a sample of the filament you are using. The Sentinel is undergoing a small update to improve the sensor sensibility and this will greatly help us validate the new revision.
| Phil Support Team |  |
| 100-1505 Saint-Thomas Lemoyne, Quebec, Canada, J4P 3S2 | |
     | dyzedesign.com |
--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion on the web visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/30497833-25c0-43c4-8fa6-0374e4983371n%40dyzedesign.com.
Benjamin Fondell
Jul 26, 2021, 3:29:02 PM7/26/21
to Technical Support, DYZE DESIGN
No, when I spin the filament in the sensor the light does not go out.
Reply all
Reply to author
Forward
0 new messages