Fan for Typhoon

[Mike Pedersen]

Hello all.

Do you have any mounting bracket or fans that fit the typhoon 0,6 and 1,2mm?

Best regards Mike

[Technical Support]

Hi Mike!

For part cooling, you can used an air compressor with the Typhoon: https://docs.dyzedesign.com/typhoon.html#part-cooling

If you prefer using fans, I know Mike from Filament Innovation is using a custom adapter attached to the heat-core: https://www.filamentinnovations.com/product-page/icarus

Otherwise, you can get our 3D files and design your own: https://docs.dyzedesign.com/general-support/cad-drawings.html#typhoontm-extruder

Phil Support Team
	100-1505 Saint-Thomas Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion on the web visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/fcd616f1-26d9-4b61-822a-5fdd789de207n%40dyzedesign.com.

[Mike Pedersen]

Would prefer using fans. 

Any link for the custom adapter or would I need to buy the $31,000.00 printer and strip off the adapter? :P 

[Technical Support]

Hello Mike,

Sadly, the fan shroud design isn't ours as the Typhoon was designed for using compressed air. You might want to try contacting them if they want to share it.

Phil Support Team
	100-1505 Saint-Thomas Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

--

You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.

To view this discussion on the web visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/e11bcb6b-c7b2-4fb7-a258-00702ba5f097n%40dyzedesign.com.