large scale heated bed

[Dan Saroussi]

hey guys

my bed size is 120cm / 120cm
im now using aluminum plate that attached to the heat source and on top i got 6 mm tempered glass.

the glass often cracks and when i use petg it sometime hard to deattached it.

do you have any other idea on what to use on top of the aluminum?

i heard about barbel, pei plate and g10 
its preatty hard to find g10 plates that big also pei 

any seggestions ? thanks! 

[Louis Dionne]

I've been using geckotek surfaces with great success.
Their largest standard size is 600x600mm. So you would need 4. But being a small shop, you might be able to get larger custom sized sheets.
https://www.geckotek.co/products/ez-stik-hot-3d-printer-build-surface?variant=12604140879987

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/84e4d55a-64c1-41ed-abcd-19e2df88447dn%40dyzedesign.com.

[Technical Support]

Depending on where you live, you can find G10 sheets up to 91x120cm on McMaster https://www.mcmaster.com/grade-g-10%2Ffr4-laminate/garolite~/multipurpose-flame-retardant-garolite-g-10-fr4-sheets-and-bars/. Really great for PETG and PLA, large prints pop off on their own when it has cooled down,

To view this discussion visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/CAMk8syNs_Zqch6sL%2Bv8AbqmgzbMaBS_rxQCDSum-Y_%3D2cMAfhA%40mail.gmail.com.

--

Flo Support Team Tier 1 Customer Service
	1505 Saint-Thomas Suite 100 Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

[Dan Saroussi]

What do you think about polyamid sheets? 

[Technical Support]

Never tried it so I can't advise here, given that nylon prints are very challenging to adhere to anything I doubt that a PA sheet can make a great adhesion surface. It could maybe work with nylon prints specifically as some materials only stick to themselves.