Dyze Pulsar Atom part cooling fan PWM

[Stan Hunnekens]

Hello,

The Pulsar Atom documentation states that the hot-end has a 10-pin connector of which pin number 10 is the PWM pin for the part cooling fans. The hot-end cable that was included only has 9 wires coming out at the other end. Does this mean I can't use PWM or do I connect the FAN+ pin to my PWM output?

Also, is it correct that the extruder fan is a lot less powerful / slower than the part cooling fans? On 100% PWM the part cooling fans sound like a jet engine firing up, while the extruder fan is nearly inaudible.

Regards,

Stan