XtruderPro Thumb Screw Use?

[Kenneth Pecho]

Sorry if this is redundant or obvious but i have been searching for documentation that specifies the purpose/use of the Xtruder pro Thumb Screw located just in front of the Lever? Is this some sort of tension adjustment on the pulling power of the XtruderPro?

[Technical Support]

Hi Kenneth,

The thumb screw is used to secure and release the hotend for quick and easy swaps.

The screw from under is for the initial adjustments once you have your hotend. After this first adjustment, the thumb screw (easily accessible) from the top is used to remove and install the hotend.

You can check the video "Toolless HotEnd Removal" here: https://dyzedesign.com/dyzextruder-pro/

You can check the videos here that show how to use them: https://docs.dyzedesign.com/extruders.html#install-a-hotend

Phil Support Team
	100-1505 Saint-Thomas Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

On Wed, Jun 30, 2021 at 8:07 PM Kenneth Pecho <kjp...@gmail.com> wrote:

Sorry if this is redundant or obvious but i have been searching for documentation that specifies the purpose/use of the Xtruder pro Thumb Screw located just in front of the Lever? Is this some sort of tension adjustment on the pulling power of the XtruderPro?

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion on the web visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/e088c10c-15a9-4e50-87bd-8700c59172dcn%40dyzedesign.com.