Stepper motor for Pulsar Atom extruder

[Justin Noor]

Hello,

Quick question on the stepper motor section of the online documentation for the Pulsar Atom. It specifies using a stepper driver that can power a motor with an RMS current of 1.68A. Is this referring to the motors that drive the XYZ axes? If not, which motor is it referring to?

Online docs:

https://docs.dyzedesign.com/pulsar-atom.html#stepper-driver

[Technical Support]

Hi Justin,

The specification in the documentation refers specifically to the motor for the Pulsar Atom extruder itself, rather than the motors for the XYZ axes.

Best regards,

Andy (Andréanne Poulin - She / Her ) Support Team - Tier 1 | dyzedesign.com
	A: Dyze Design, 100-1505 Estelle-Mouton, LeMoyne, Quebec, Canada, J4P 3S2
The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/e59df7e9-525a-438c-b733-5e9ca78c8ae9n%40dyzedesign.com.