Sending commands from TMFlow to STF06-IP

[TilenJ]

Hello!

I am trying to integrate a Dyze Design Zephyr extruder with a STF06-IP stepper driver to a Techman TM14S robot. I would like to generate a 3d print project using RoboDK. But I ran into issues when trying to communicate to STF06-IP with the TMFlow program blocks. I would like to know what is the preferred way to send commands to the driver over IP.

Thanks,
Tilen Jug.

[Technical Support]

Hi Tilen,

Please note that both the STF06-IP stepper driver and the Techman TM14S robot are not products from Dyze Design. Therefore, our expertise and support for their integration are limited.

To get the motor to move, you will need to correctly map the I/O and utilize the set jogging speed function from the STF.

For more in-depth assistance with this integration, I recommend reaching out to Moons and Techman directly, as they will be able to provide more comprehensive support for their products.

Regards,

Andy (Andréanne Poulin - She / Her ) Support Team
	100-1505 Estelle-Mouton Lemoyne, Quebec, Canada, J4P 3S2
	dyzedesign.com

--
You received this message because you are subscribed to the Google Groups "DYZE DESIGN" group.
To unsubscribe from this group and stop receiving emails from it, send an email to support-dyze-de...@dyzedesign.com.
To view this discussion visit https://groups.google.com/a/dyzedesign.com/d/msgid/support-dyze-design/adc96509-b246-4365-bf4d-c38aa3af7c35n%40dyzedesign.com.