As I tested EC firmware_FAFTSetup case,
$ /usr/bin/test_that --board=$BOARD 192.168.1.4 firmware_FAFTSetup
03/21 09:48:20.429 INFO |firmware_FAFTSetup:0083| Check test image is on USB stick and run recovery boot
03/21 09:49:06.532 INFO | firmware_test:0373| usb dev is /dev/sdb
03/21 09:49:06.555 INFO | servo:0671| Will execute on servo host: mount -o ro /dev/sdb3 /tmp/usbcheck.7qzl
03/21 09:49:06.627 ERROR| utils:0282| [stderr] mount: /dev/sdb3 is already mounted or /tmp/usbcheck.7qzl busy
03/21 09:49:06.629 ERROR| servo_host:0313| Command <sudo -n sh -c "mount -o ro /dev/sdb3 /tmp/usbcheck.7qzl"> failed, rc=32, Command returned non-zero exit status
USB stick is plugged into USB port on Servo V2 board, it has test OS image in it and was used to install OS onto DUT successfully via recovery mode.
--
You received this message because you are subscribed to the Google Groups "faft users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to faft-users+unsubscribe@chromium.org.
Hi Tom,
Yes, you are right, I disabled automount / automount-open features from “dconf Editor”, “mount: /dev/sdb3 is already mounted or /tmp/usbcheck.7qzl busy” is never showed again, this help us pass another 2 EC test cases too - firmware_RecoveryButton.ec_wp & firmware_RecoveryButton.ec_wp.
Thanks your expertise support, and believe we need your closely further support in next few weeks!
Regards,
Martin
--
To unsubscribe from this group and stop receiving emails from it, send an email to faft-users+...@chromium.org.