ChromiumOS on RK3399 SBC
224 views
Skip to first unread message
slavert snodger
Aug 29, 2018, 10:47:53 AM8/29/18
to Chromium OS Development
Hi guys new to Chromium dev and managed to build the overlay for baseboard=gru.
Being new it took me a while to realise its a USB boot image that transfers to HD.
The board I am using is a RockPro64 and there are a large number of RK3399 SBCs and settop boxes.
Being an SBC I can access and remove the SD & eMMC module but can not boot from USB.
I noticed on the old FlintOS/Fyde for RK3399 Firefly they had created images that install the 'Android' way with a recover mode where you can flash via USB and wondering how to do the same with Gru.
Being new to Chromium OS and help or corrections would be welcome and from the build can I recreate a partition system for a working image/
Many Thanks
Stuart
Being new it took me a while to realise its a USB boot image that transfers to HD.
The board I am using is a RockPro64 and there are a large number of RK3399 SBCs and settop boxes.
Being an SBC I can access and remove the SD & eMMC module but can not boot from USB.
I noticed on the old FlintOS/Fyde for RK3399 Firefly they had created images that install the 'Android' way with a recover mode where you can flash via USB and wondering how to do the same with Gru.
Being new to Chromium OS and help or corrections would be welcome and from the build can I recreate a partition system for a working image/
Many Thanks
Stuart
Mike Frysinger
Aug 29, 2018, 12:16:47 PM8/29/18
to slavert snodger, chromium-os-dev
sorry, but we don't have any support for turning the image into an Android payload. however, it should boot from an mmc/sd slot assuming your firmware supports it.
-mike
--
--
Chromium OS Developers mailing list: chromiu...@chromium.org
View archives, change email options, or unsubscribe:
https://groups.google.com/a/chromium.org/group/chromium-os-dev
Reply all
Reply to author
Forward
This conversation is locked
You cannot reply and perform actions on locked conversations.
0 new messages