Enable RTSP on EZVIZ C1C WiFi IP Camera - Disable in June 2023 Firmware

[ZzyzxOh]

1. Reset camera by holding the button on body for ten (10) seconds. Voice will confirm reset.
2. Connect a device that has EZVIZ App to EZVIZ Camera WiFi Access Point.
3. In EZVIZ App, use Main App Settings to Scan Local Network by selecting LAN Live View.
4. Click the reset camera and Select Gear Icon in upper right. If Gear is not visible, click the camera image.
5. Select Local Service Settings to find RTSP Toggle.
6. Click Toggle for Enable RTSP Stream.
7. Accept warning about insecure third party protocol by clicking OK.
8. Save settings.
9. Connect your EZVIZ App device back to your WiFi network. It will know how to resume AP Mode when it needs it.
10. Using EZVIZ App, Setup EZVIZ Camera so it resumes WiFi connection. At "Reset Camera", just click Next with Flashing Blue checkbox selected.
11. (If another camera wants to use Cellular data while connected to AP mode, say yes or EZVIZ App gets confused.)
12. RTSP will be enabled and CAMECT will see the camera again.