Adding a WYSE CAM PAN v3

[PJ C]

Is there a Camect guide to integrate a WYSE CAM PAN v3 into my Camect HUB?

[Steve Lee]

Adding a Wyze V3 Pan-Tilt Camera

The process for adding a Wyze V3 Pan-Tilt is similar to adding other Wyze cameras. Keep in mind:

• V4 Pan-Tilt Camera is not supported currently 

• V3 cameras are supported, but pan-tilt control is not available.

Steps to Add the Camera

1. Open the CAMECT UI.

2. Click the gear icon.

3. Select Cameras → Add a Camera.

4. In Camera Type, open the drop-down menu and scroll down to Wyze.

5. Enter your Wyze credentials.

6. You will also need a API key and a Key ID  from Wyze.

   • Click the question mark (?) next to the fields for instructions.

   • This will take you to a Wyze login page where you can generate those values.

7. Paste the key and password into the interface.

8. Once complete, all Wyze cameras in your account will appear.

9. Select the supported cameras you want to add.

Steve Lee
Camect Support

On Thu, Sep 4, 2025 at 7:47 PM PJ C <pjc...@gmail.com> wrote:

Is there a Camect guide to integrate a WYSE CAM PAN v3 into my Camect HUB?

--
You received this message because you are subscribed to the Google Groups "Camect User Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to forum+un...@camect.com.
To view this discussion visit https://groups.google.com/a/camect.com/d/msgid/forum/4bb158d3-d915-497b-9c2a-a53b98ee6f6en%40camect.com.