RePaper 2.7' display with Arduino Due

23 views
Skip to first unread message

Shirsha Ghosh

unread,
Feb 5, 2016, 1:28:01 AM2/5/16
to devel...@arduino.cc, Alak Majumder
I got a RePaper 2.7' eInk display that is Unfortunately doesn't supports Arduino Mega because of SRAM capacity. I am porting the library for Arduino Due because of its enough RAM capacity.

I am using this thread https://forums.adafruit.com/viewtopic.php?f=22&t=47571. But I cant find any EPD.CPP file here. As the thread is quite old, the Library may have changed. 

Have anyone successfully ported the library for Arduino Due. Also anyone has library for Dynamic Printing in this display?

Regards,
Shirsha Ghosh

Andrew Kroll

unread,
Feb 5, 2016, 1:30:56 AM2/5/16
to devel...@arduino.cc

It would work fine with XMEM2, which would provide more heap...

https://github.com/xxxajk/xmem2


--
You received this message because you are subscribed to the Google Groups "Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to developers+...@arduino.cc.

Shirsha Ghosh

unread,
Feb 5, 2016, 1:36:32 AM2/5/16
to devel...@arduino.cc, xxx...@gmail.com
do this support dynamic printing?

Pieter van der Meer

unread,
Feb 5, 2016, 4:30:59 AM2/5/16
to devel...@arduino.cc, xxx...@gmail.com
Recently did this (in a commercial context). Works great. Could even overclock it to 21 MHz.. But just beware that there were a lot of changes to the epaper's command set. old code on the net may not be compatible with new epapers.. 

Pieter van der Meer
Tasty Chips Electronics

Shirsha Ghosh

unread,
Feb 8, 2016, 1:36:07 AM2/8/16
to Pieter van der Meer, devel...@arduino.cc, Andrew Kroll
I have modifies all this according to Arduino Due. But still no luck. Have anyone got any Idea interfacing RePaper with DUE.


On Mon, Feb 8, 2016 at 9:39 AM, Shirsha Ghosh <shirs...@gmail.com> wrote:
Hello brother,

I am facing quiet difficulty in interfacing Arduino DUE with RePaper. Please give me your valuable input sir.


On Sat, Feb 6, 2016 at 11:21 AM, Shirsha Ghosh <shirs...@gmail.com> wrote:

Hi brother. Have you checked? Please help me out.

On 5 Feb 2016 15:24, "Shirsha Ghosh" <shirs...@gmail.com> wrote:
Thanks mate. It will be very beneficial if you can help me brother. Please let me give some hints to start with


On Fri, Feb 5, 2016 at 3:23 PM, Pieter van der Meer <pvd...@gmail.com> wrote:
DUE

On Fri, Feb 5, 2016 at 10:51 AM, Shirsha Ghosh <shirs...@gmail.com> wrote:
U worked on DUE or Mega?


On Fri, Feb 5, 2016 at 3:20 PM, Pieter van der Meer <pvd...@gmail.com> wrote:
Hi Shirsha,

I would like to, but I have to speak to the customer.. to which my code now belongs. In any case. I'm sure I downloaded the EPD.cpp a few weeks ago. You might find them on a TI or Pervasive Displays page. And please keep in mind that the version of the Pervasive Display COG hardware is very important. New COGs don't work with old EPD.cpp...

Cheers,

Pieter


On Fri, Feb 5, 2016 at 10:44 AM, Shirsha Ghosh <shirs...@gmail.com> wrote:
HI.
Can you please help me to interface Arduino Due with Repaper Display plz.

epd_modified.ino
EPD.cpp
EPD_GFX.cpp
FLASH.cpp
EPD.h
S5813A.cpp
Reply all
Reply to author
Forward
0 new messages