Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

RAMBoard 1541 - Manual and installation guide...

41 views
Skip to first unread message

Rodolfo Leal

unread,
Nov 9, 2003, 10:42:06 PM11/9/03
to
Hello everybody,
I'm on the way to get a RAMBoard 1541 -waiting to arrive by mail-
and I wonder if somebody has the installation guide for it, as I
bought the board only. It's supposed to be in working order. Any
hints, tips or advice to use it is welcome too. Thanks in advance.

Regards,
Rodolfo Leal

Forrest

unread,
Nov 12, 2003, 7:40:57 PM11/12/03
to

Hi there, I have a RAMBOard in my 1541 drive, but don't have the
installation guide for it. From what I remember it's pretty simple to
install, basically just pry up the 6502 chip from the 1541 drive, put it
in the socket on the RAMBOard, and plug the RAMBOard into the socket that
you removed the 6502 from.

Forrest

--
Visit my Commodore 64 Website
http://almighty.c64.org/

Rodolfo Leal

unread,
Nov 23, 2003, 4:29:12 PM11/23/03
to
Hi Forrest,
Thanks for answering my thread. I just got the RAMBoard today. It's
more simple than I imagined. The board has two chips installed and an
empty socket. From your description, this is the area for the CPU,
right? However the board has three wires too. Could you look at yours
and tell me where these wires are connected? Thanks again for your
time.

Regards,
Rodolfo Leal


Forrest <for...@almighty.c64.org> wrote in message news:<Pine.LNX.4.44.03111...@almighty.c64.org>...

0 new messages