Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

Netconfig crashes (SCO 5.0.5)

0 views

Skip to first unread message

Jasper Recto

unread,

Mar 12, 2002, 8:13:58 AM3/12/02

to SCO UNIX Newsgroup (E-mail)

When I exit out of netconfig it just hangs. Even if I just view
configurations and make no changes. It started when I went into netconfig
to change the duplex mode. It was supposed to ask me to rebuild the kernal
but it never got to that point. It was eventually rebooted that day and
it's been acting up since then.

Any suggestions?

Thanks

Brian K. White

unread,

Mar 12, 2002, 9:01:45 AM3/12/02

"Jasper Recto" <jre...@coopoptical.com> wrote in message
news:000001c1c9c7$c5b47f20$6e01000a@coop0010...

what are "pseudo ttys" and "tcp connections" set to in netconfig in the
tcp/ip properties for the network card? try lowering one or both. If it's
what I think, it will immediately resume working as soon as both values
are under some threshhold that I don't know at the moment. so you can
quickly try and retry changing a value and exiting netconfig, as soon as
the values are small enough netconfig will once again ask the rebuild
questions when you go to exit and you can let it do it and reboot.

If you need those values to be as high as you were trying to get
originally, there are other ways, which someone else will have to weigh in
on. I've managed so far to avoid the issue.

--
Brian K. White -- br...@aljex.com -- http://www.aljex.com/bkw/
+++++[>+++[>+++++>+++++++<<-]<-]>>+.>.+++++.+++++++.-.[>+<---]>++.
filePro BBx Linux SCO Prosper/FACTS AutoCAD #callahans Satriani

0 new messages