IDE CDROM locks the system hard on media error
Zdenek Kabelac
>
> Hello,
>
> I am catalogizing my set of CDs and so I have tortured my CD drive
> with a bunch of less-than-optimal CDs. I had two hard lockups
> most probably connected to problematic media.
>
> The last message in log is
>
> kernel: scsi0: ERROR on channel 0, id 0, lun 0,
> CDB: Request Sense 00 00 00 40 00
> kernel: Current sd0b:00: sense key Medium Error
> kernel: Additional sense indicates No seek complete
> kernel: I/O error: dev 0b:00, sector 504
> kernel: ISOFS: unable to read i-node block
>
> Shortly (but not immediately, the kernel tried a bit more to get
> some data from the drive) after that the system froze - not even
> SysRq worked.
>
Actually I've wanted to report the same problem - I even believe
I've already reported this long time ago in the dark ages when
everyone has been saying some stupid things about BP6...
Usualy reading CD-ROM && hdparm -t /dev/hda was quite easy way
to deadlock the whole system.
Now I would say that 2.4.17rc2 becames more stable but still I've
been faced with similar problem - I have tried to read damaged CD with
movie
and this is part of log:
begin of errors - please notice the TIME values!
Dec 29 22:02:04 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:02:13 decibel kernel: hdc: cdrom_decode_status: status=0x51 {
DriveReady SeekComplete Error }
Dec 29 22:02:13 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:02:20 decibel kernel: hdc: cdrom_decode_status: status=0x51 {
DriveReady SeekComplete Error }
Dec 29 22:02:20 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:02:27 decibel kernel: hdc: cdrom_decode_status: status=0x51 {
DriveReady SeekComplete Error }
Dec 29 22:02:27 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:02:33 decibel kernel: hdc: cdrom_decode_status: status=0x51 {
DriveReady SeekComplete Error }
Dec 29 22:02:33 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:02:33 decibel kernel: hdc: DMA disabled
Dec 29 22:02:33 decibel kernel: hdc: ATAPI reset complete
...
Dec 29 22:03:19 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:03:19 decibel kernel: hdc: ATAPI reset complete
Dec 29 22:03:19 decibel kernel: end_request: I/O error, dev 16:00 (hdc),
sector 321092
...
Dec 29 22:05:47 decibel kernel: hdc: ATAPI reset complete
Dec 29 22:05:47 decibel kernel: end_request: I/O error, dev 16:00 (hdc),
sector 321976Dec 29 22:08:37 decibel kernel: end_request: I/O error, dev
16:00 (hdc), sector 322416
Dec 29 22:08:43 decibel kernel: hdc: cdrom_decode_status: status=0x51 {
DriveReady SeekComplete Error }
...
Dec 29 22:08:59 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:09:25 decibel kernel: SysRq : Emergency Sync
Dec 29 22:09:25 decibel kernel: Syncing device 21:41 ... OK
Dec 29 22:09:25 decibel kernel: Syncing device 21:46 ... OK
Dec 29 22:09:25 decibel kernel: Syncing device 21:47 ... OK
Dec 29 22:09:25 decibel kernel: Syncing device 16:00 ... OK
Dec 29 22:09:25 decibel kernel: Syncing device 03:05 ... OK
Dec 29 22:09:25 decibel kernel: Done.
deadlock here after 'U' - reset button required
then again:
Dec 29 22:23:39 decibel kernel: hdc: cdrom_decode_status: error=0x30
Dec 29 22:23:39 decibel kernel: hdc: ATAPI reset complete
Dec 29 22:23:39 decibel kernel: end_request: I/O error, dev 16:00 (hdc),
sector 321980
...
Dec 29 22:28:10 decibel kernel: hdc: ATAPI reset complete
Dec 29 22:28:10 decibel kernel: end_request: I/O error, dev 16:00 (hdc),
sector 322420
...
Dec 29 22:29:30 decibel kernel: hdc: ATAPI reset complete
Dec 29 22:29:30 decibel kernel: end_request: I/O error, dev 16:00 (hdc),
sector 321980
And looping for loooong time without any progress here - around some
numbers.
I've tried then to use 'dd' with conv=noerror but I had
to skip error part manualy via skip simply because linux was unable
to make any progress here even after 10 minutes.
I guess my CD-ROM was in DMA mode initialy but after it switchies DMA of
the computer becomes almost unusable.
Another problem I would like to see solved one day - why just my machine
is completely unable while anacron does it's jobs ???
Why there couldn't be option in /proc to set limit for maximum amount of
RAM
for caching filesystem ??? (like 30MB from my 128MB ram ?)
(I think I know better what I need that the Linux VM)
bye
kabi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/