4.4-REL Install Fails: SCSI scan after pcic2

[Jed Clear]

I'm trying to install 4.4-RELEASE on a K6-233.

The MFS root floppy boot hangs every time with the message about waiting
15 seconds for the SCSI devices to settle. This is immediately after it
finds the pcic2 ISA-PCCard adapter I've got. I've also got an
AHA-2940UW and a (possibly Adaptec) SCSI adapter for my scanner. No IDE
or USB devices (controllers disabled). (list below)

I'm guess it is trying to scan a PCMCIA SCSI adapter, which isn't there
(I've only got CF cards).

Any way to turn this behavior off?

Or could it be something else. I still haven't figured out if the HW
scan is picking up the SCSI controllers that are there, since it scrolls
by too fast.

Thanks,

-Jed

Hardware:
ABit AX5 Mobo/K6-233 CPU/64MB RAM
Matrox Mil II (IRQ 14)
AHA-2940UW (IRQ 15) w/ ST34501W, CD-ROM, CD-RW
PS/2 Mouse (IRQ 12)
D-Link DFE-530TX NIC (IRQ 11)
UMAX UDS-IS11 ISA SCSI Controller w/ Scanner
SB AWE64 (IRQ 5)
Actiontec PC700 ISA PCCard Adapter
[IRQ as reported by Win95B]

[Jed Clear]

In case anyone is searching the archives later...
Had to set BIOS to assign IRQ to USB. Something new 4.4.