DriveReady Seek Complete Error
gawda
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST33210A, ATA DISK drive
hdb: WDC AC11200L, ATA DISK drive
blk: queue c02ba160, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c02ba2ac, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 6346368 sectors (3249 MB) w/256KiB Cache, CHS=787/128/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 2503872 sectors (1282 MB) w/256KiB Cache, CHS=621/64/63, DMA
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2
p.
gawda
Lech Szychowski
: Czy takie komunikaty w logach zapowiadaja cos zlego?:
: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
: hda: task_no_data_intr: error=0x04 { DriveStatusError }
Zacytuję Alana Coksa:
===
> Dec 6 21:00:23 brood kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Dec 6 21:00:23 brood kernel: hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error}
> Dec 6 21:00:23 brood kernel: hda: task_no_data_intr: error=0x04 { DriveStatusError }
These are ok - its trying to set options the drive doesnt support and we
dont yet do that quietly.
===
--
Leszek.
-- le...@pse.pl 2:480/33.7 -- REAL programmers use INTEGERS --
-- speaking just for myself...
gawda
p.
gawda